View the manual for the Zipper ZI-RPE60C here, for free. This manual comes under the category vibration plates and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Zipper ZI-RPE60C or do you need help? Ask your question here




| Brand | Zipper |
| Model | ZI-RPE60C | ZI-RPE60C |
| Product | vibration plate |
| EAN | 9120039231150 |
| Language | English |
| Filetype | User manual (PDF) |
| Product type | Vibratory plate |
| Engine displacement | - cm³ |
| Plate material | Steel |
| Travel speed | 20 m/min |
| Fuel tank capacity | 3.6 L |
| Engine type | Petrol engine |
| Compaction force | 10500 N |
| Sound level | 108 dB |
| Compaction depth | 200 cm |
| Power source type | Gasoline |
| Engine power | - hp |
| Plate width | 360 mm |
| Plate depth | 430 mm |
| Weight | 64000 g |
| Package weight | 71000 g |
| Package width | 380 mm |
| Package height | 580 mm |
| Package depth | 750 mm |
| Quantity per pack | 1 pc(s) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zipper ZI-RPE60C below.
The Zipper ZI-RPE60C has a weight of 64000 g.
Yes, Zipper ZI-RPE60C has a sound level of 108 dB, which is quite high compared to similar products.
No, Zipper ZI-RPE60C is powered by a petrol engine, offering more mobility but requiring fuel.
Zipper ZI-RPE60C has a compaction force of 10500 N, which is considered high and ensures a strong and effective compaction level.
Zipper ZI-RPE60C has a travel speed of 20 m/min, which is a decent speed for completing tasks efficiently.
Zipper ZI-RPE60C has a fuel tank capacity of 3.6 L, providing sufficient fuel for extended periods of use without frequent refueling.
To change the engine oil for the Zipper ZI-RPE60C vibration plate, follow these steps: 1. Remove the oil drain hose from the holder and unscrew the drain screw to collect and dispose of the drained oil properly. 2. Tighten the oil drain plug after emptying the old oil. 3. Top up with fresh high-quality engine oil, such as SAE30 or 15W40, through the filling opening. 4. Use about 0.5 liters of oil for the refill. 5. Ensure the machine is on a level surface, switch off the engine, and let it stand for ten minutes before checking the oil level. 6. Wipe the oil dipstick, insert it into the opening without screwing it in, then pull it out to read the oil level. 7. Refill with the recommended oil up to the upper edge if the level is low. 8. Push in the dipstick again and tighten it securely.
To determine the need to clean the air filter of the Zipper ZI-RPE60C vibration plate, observe the following signs: 1. Decreased engine power and increased fuel consumption simultaneously. 2. Increased oil consumption. 3. Difficulty in starting the engine. Regularly cleaning the air filter is crucial to prevent problems such as starting issues, performance loss, and engine damage. To clean the air filter, loosen the wing nut on the air filter housing, remove the cover and air filter cassette, and clean both elements with a soft brush. If only the air filter cassette needs cleaning, blow dry compressed air from the inside until all dust is removed. Remember, neglecting air filter maintenance can lead to engine issues and reduced machine lifespan.
Yes, the manual of the Zipper ZI-RPE60C is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Zipper and is the answer not in the manual?
Question and answer
Number of questions: 0