Zanussi ZWF 71263 W LINDO 100 manual

Zanussi ZWF 71263 W LINDO 100
(85)
  • Number of pages: 20
  • Filetype: PDF
You can cancel or change the set of
the Finish In option before you touch
the button . After touching the
button you can only cancel the
Finish In option.
To cancel the the Finish In option:
a. Touch the button to set the
appliance to pause. The indicator of
button flashes.
b. Touch the button until the indicator
above this button goes off.
Touch the button again to start the
programme immediately.

Interrupting a programme and changing

the options

You can change only some options before they
operate.
1. Touch .
The indicator of this button flashes.
2. Change the options. If you change any
option the Finish In option (if set) will be
disabled.
3. Touch again.
The programme continues.

Cancelling a programme

1. Press the button for some seconds to
cancel the programme and to deactivate the
appliance.
2. Press the same button again to activate the
appliance. Now, you can set a new washing
programme.
The appliance does not drain the
water. The water left in a drum can
be used for the next washing cycle.

Opening the door

While a programme (or the ) operates, the
appliance door is locked. The indicator is
on.

CAUTION!

If the temperature and level of the
water in the drum are too high, you
cannot open the door.
To open the door during the first minutes
of the cycle (or when the operates) :
1. Touch the button to pause the
appliance.
2. Wait until the indicator goes off.
3. You can open the door.
4. Close the door and touch the button
again. The programme (or the )
continues.

At the end of the programme

The appliance stops automatically.
The acoustic signal operates (if it is
activated).
In the display comes on.
The indicator of the button goes off.
The door lock indicator goes off.
You can open the door.
Remove the laundry from the appliance.
Make sure that the drum is empty.
Press the button for some seconds to
deactivate the appliance.
Close the water tap.
Keep the door and the detergent drawer
ajar, to prevent the mildew and odours.
The washing programme is completed,
but there is water in the drum:
The drum turns regularly to prevent the
creases in the laundry.
The indicator
flashes to remind you to
drain the water.
The door lock indicator is on. The
indicator of button flashes. The door
stays locked.
You must drain the water to open the door.
Draining the water:
1. To drain the water.
Touch the button . The appliance
drains the water and spins with the
maximum spin speed for selected
washing programme.
Alternatively, touch the button to
change the spin speed and then touch
the button . The appliance drains the
water and spins. If you set , the
appliance only drains.

12 www.zanussi.com

Zanussi ZWF 71263 W LINDO 100

Need help?

Number of questions: 91

Do you have a question about the Zanussi ZWF 71263 W LINDO 100 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Zanussi ZWF 71263 W LINDO 100 owners to properly answer your question.

Cherryl wingham • 3-2-2021 4 comments

What are the times of each washing program

What are the times of each washing program
Vanessa • 11-2-2021

Hi how do I use the rapid wash

Stella Lawlor • 14-6-2021

How do I use the rapid wash on ZWF71263W for temp 40 degree

Stella Lawlor • 14-6-2021

What's the best way to do a half wash

Vanessa • 20-10-2021

Anyone know how to fix rubber part?

Anyone know how to fix rubber part?
Answer this question
Sarah Mills • 17-6-2021 No comments

How long do each of the washing cycles take please?

How long do each of the washing cycles take please?
Answer this question
Mariya • 20-9-2021 No comments

How can I wash my clothes with in 15 minutes?

How can I wash my clothes with in 15 minutes?
Answer this question
Bobbi Edwards • 20-7-2021 No comments

I want to turn off beep but mine is an older model than shown and hasn't got the same dial configuration.. help its driving me crazy!

I want to turn off beep but mine is an older model than shown and hasn't got the same dial configuration.. help its driving m...
Answer this question
Manu • 13-5-2021 No comments

How to unlock

How to unlock
Answer this question
Aneta • 11-10-2021 No comments

Hi, what are the times of each washing program , how do I use the rapid wash?

Hi, what are the times of each washing program
, how do I use the rapid wash?
Answer this question
Catherine devine • 10-12-2021 No comments

When it's filling it tripping the electric off

When it's filling it tripping the electric off
Answer this question
Aisling • 28-1-2022 No comments

How long is each washing cycle please

How long is each washing cycle please
Answer this question
Christopher Collington • 31-12-2021 No comments

For installation purposes, I need exact overall dimensions please

For installation purposes, I need exact overall dimensions please
Answer this question
Louis Attard • 8-12-2021 1 comment

How to release open the door after the washing is done and the washing programme is finished. Door cannot open as usual, it is stuck.

How to release open the door after the washing is done and the washing  programme is finished. Door cannot open as usual, it ...
Youssef Boutros-Ghali • 10-1-2022

The door is stuck and won’t open

Answer this question

View the manual for the Zanussi ZWF 71263 W LINDO 100 here, for free. This manual comes under the category Washing Machines and has been rated by 85 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Zanussi ZWF 71263 W LINDO 100 or do you need help? Ask your question here

Zanussi ZWF 71263 W LINDO 100 specifications

General
Brand Zanussi
Model ZWF 71263 W LINDO 100
Product Washing Machine
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Zanussi ZWF 71263 W LINDO 100.

Is your question not listed? Ask your question here