View the manual for the Zanussi ZGH62414XS here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Zanussi ZGH62414XS or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Zanussi ZGH62414XS.
The Zanussi ZGH62414XS stove is a gas hob with four cooking zones, all of which are gas-powered. This stove does not have any electric cooking zones. The simmer cooking zone is round in shape, as are the regular and large cooking zones. It is designed for easy cleaning, making maintenance hassle-free. The stove has a width of 594 millimeters, a depth of 510 millimeters, and requires an installation compartment height of 43 millimeters. The Zanussi ZGH62414XS stove offers users the flexibility of four gas cooking zones in various sizes and shapes to accommodate different cooking needs. With its compact design and easy-to-clean features, this gas stove is a practical addition to any kitchen.
| Brand | Zanussi |
| Model | ZGH62414XS | ZGH62414XS |
| Product | stove |
| EAN | 7332543587384 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Hob type | Gas |
| Number of cooking zones | 4 zone(s) |
| Number of gas cooking zones | 4 zone(s) |
| Number of electric cooking zones | 0 zone(s) |
| Simmer cooking zone shape | Round |
| Regular cooking zone shape | Round |
| Large cooking zone shape | Round |
| Appliance placement | Built-in |
| Product color | Stainless steel |
| Pan support material | Enameled |
| Simmer cooking zone diameter | 54 mm |
| Regular cooking zone diameter | 70 mm |
| Large cooking zone diameter | 100 mm |
| Hob width size | 60 cm |
| Top surface type | - |
| Number of simultaneously used cooking zones | 4 |
| Cooking zone 4 type | Simmer |
| Cooking zone 1 shape | Round |
| Cooking zone 3 type | Regular |
| Cooking zone 1 power | 2000 W |
| Cooking zone 3 power source | Gas |
| Cooking zone 2 position | Left front |
| Cooking zone 3 power | 2000 W |
| Cooking zone 4 shape | Round |
| Cooking zone 3 position | Right rear |
| Cooking zone 4 diameter | 54 mm |
| Cooking zone 2 shape | Round |
| Cooking zone 3 diameter | 70 mm |
| Cooking zone 4 power | 1000 W |
| Cooking zone 4 position | Right front |
| Cooking zone 1 diameter | 70 mm |
| Cooking zone 1 type | Regular |
| Cooking zone 4 power source | Gas |
| Cooking zone 3 shape | Round |
| Cooking zone 2 type | Large |
| Cooking zone 1 position | Left rear |
| Cooking zone 2 power source | Gas |
| Cooking zone 2 power | 3000 W |
| Cooking zone 1 power source | Gas |
| Cooking zone 2 diameter | 100 mm |
| Easy to clean | Yes |
| Control type | Rotary |
| Built-in display | No |
| Control position | Top right |
| Electronic ignition | Yes |
| Child lock | - |
| Width | 594 mm |
| Depth | 510 mm |
| Height | - mm |
| Installation compartment height | 43 mm |
| Installation compartment width | 550 mm |
| Installation compartment depth | 470 mm |
| Cord length | 1.1 m |
| Number of power levels | - |
| Thermocouple protection | Yes |
| Regular cooking zone | 2000 W |
| Simmer cooking zone | 1000 W |
| Large cooking zone | 3000 W |
| Connected load (gas) | 8000 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (electric) | - W |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZGH62414XS below.
Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.
Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.
A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.
No, cooking on induction is not dangerous.
The Zanussi ZGH62414XS has a height of - mm.
The Zanussi ZGH62414XS has a width of 594 mm.
The Zanussi ZGH62414XS has a depth of 510 mm.
Yes, the Zanussi ZGH62414XS has a gas hob. This means that it uses gas as a fuel source for cooking.
The Zanussi ZGH62414XS has 4 cooking zones. This provides the user with multiple options for cooking different dishes at the same time.
No, the Zanussi ZGH62414XS does not have any electric cooking zones. This means that all the cooking zones are powered by gas.
Yes, the Zanussi ZGH62414XS is easy to clean. This feature makes maintenance and cleaning of the stove hassle-free for the user.
The control type of the Zanussi ZGH62414XS is rotary. This type of control allows for easy adjustment of the heat levels during cooking.
To adjust the power of the gas burners on the Zanussi ZGH62414XS stove, follow these steps: 1. Remove the knob and the gasket from the burner you want to adjust. 2. Use a thin screwdriver to locate and adjust the bypass screw position (marked as "A" in the manual). 3. If you want to change from natural gas (G20 20 mbar) to liquid gas, fully tighten the bypass screw in. 4. If you want to change from liquid gas to natural gas (G20 20 mbar), undo the bypass screw approximately 1/4 of a turn. 5. Reassemble the gasket and the knob onto the burner. It's important to note that when adjusting the power of the gas burners, you should ensure that the flame does not go out when quickly turning the knob from the maximum position to the minimum position. Please refer to the manual for any additional safety precautions or specific instructions related to adjusting the power of the gas burners on the Zanussi ZGH62414XS stove.
If the gas burners on the Zanussi ZGH62414XS stove are not igniting, you can follow these steps to troubleshoot the issue: 1. Check if the hob is correctly connected to the electrical supply. Ensure that it is properly plugged in and that the fuse is not blown. 2. Make sure that the burner cap and crown are placed correctly. If they are not aligned properly, it can prevent the flame from igniting. 3. Keep the control knob pushed for equal or less than 10 seconds after lighting the flame. This allows the thermocouple to warm up and ensure a consistent flame. 4. If the flame extinguishes immediately after ignition, it may indicate that the thermocouple is not heated up sufficiently. In this case, try keeping the knob pushed for a longer duration. 5. Check if the burner crown is blocked with food residues. Clean the burner crown and ensure that the injector is not blocked. If you have tried these troubleshooting steps and the issue persists, it is recommended to contact your dealer or an authorized service center for further assistance. Provide them with the necessary details from the rating plate for accurate support.
To change the nozzles on the Zanussi ZGH62414XS stove for use in Malta, follow these steps: 1. Locate the gas burners on the stove. There are different types of burners, including rapid, semi-rapid, and auxiliary burners. 2. Refer to the table in the manual for the specific nozzle sizes and gas flow rates required for Malta. The table provides information for both natural gas (G20 20 mbar) and LPG (G30/G31 28-30/37 mbar). 3. Turn off the gas supply to the stove and ensure that the burners are cool before proceeding. 4. Remove the burner caps and crowns from the burners that need to be adjusted. 5. Using a suitable tool, carefully unscrew the existing nozzles from the burners. 6. Replace the old nozzles with the appropriate nozzles for Malta, as specified in the table. 7. Ensure that the nozzles are securely tightened but avoid overtightening. 8. Reassemble the burner caps and crowns onto the burners. 9. Turn on the gas supply and perform a leak test to ensure there are no gas leaks. 10. Test the burners by igniting them and checking for proper flame appearance and performance. By following these steps, you can successfully change the nozzles on the Zanussi ZGH62414XS stove for use in Malta.
To identify the model of your Zanussi ZGH62414XS stove, you can follow these steps: 1. Locate the rating plate on the stove. It is usually located on the side or back of the appliance. 2. Look for the model number on the rating plate. The model number is a combination of letters and numbers that uniquely identifies your stove. 3. The model number may be labeled as "Model," "Type," or "Product Code" on the rating plate. 4. Note down the complete model number of your Zanussi ZGH62414XS stove. 5. You can also check the user manual or any documentation that came with the stove. The model number is often mentioned in these materials. By following these steps, you can easily identify the model of your Zanussi ZGH62414XS stove. If you have any further questions or need assistance, you can contact the manufacturer or refer to their customer support for more information.
Yes, the manual of the Zanussi ZGH62414XS is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Zanussi and is the answer not in the manual?
Question and answer
Number of questions: 0