Zanussi ZCV668MN manual

Zanussi ZCV668MN
8.5 · 1
PDF manual
 · 24 pages
English
manualZanussi ZCV668MN

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy
You cannot activate the appli-
ance.
The appliance is not connected
to an electrical supply or it is
connected incorrectly.
Check if the appliance is correct-
ly connected to the electrical
supply.
You cannot activate the appli-
ance.
The fuse is released. Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Residual heat indicator does not
come on.
The zone is not hot because it
operated only for a short time.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The necessary settings are not
set.
Make sure that the settings are
correct.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.

We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................

Installation

WARNING!

Refer to Safety chapters.

www.zanussi.com 17

Manual

View the manual for the Zanussi ZCV668MN here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Zanussi ZCV668MN or do you need help? Ask your question here

Need help?

Do you have a question about the Zanussi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Zanussi ZCV668MN specifications

Below you will find the product specifications and the manual specifications of the Zanussi ZCV668MN.

General
BrandZanussi
ModelZCV668MN
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZCV668MN below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Zanussi ZCV668MN available in English?

Yes, the manual of the Zanussi ZCV668MN is available in English .

Is your question not listed? Ask your question here

No results