Zanussi ZCV667MWC manual

Zanussi ZCV667MWC
7.2 · 1
PDF manual
 · 24 pages
English
manualZanussi ZCV667MWC

Accessories

Wire shelf
For cookware, cake tins, roasts.
Grill- / Roasting pan
To bake and roast or as pan to collect fat.
Trivet
For roasting and grilling.
Use the trivet only with the Grill- /
roasting pan.

Before first use

WARNING!

Refer to Safety chapters.

Initial Cleaning

Remove all accessories from the appliance.
Refer to "Care and cleaning"
chapter.
1. Clean the appliance before first use.
2. Put the accessories back to their initial
position.

Setting the time

You must set the time before you operate the
oven.
Only the top oven works without the
set time.
The indicator for the Time of day function
flashes when you connect the appliance to the
electrical supply, when there was a power cut
or when the timer is not set.
Press the or button to set the correct
time.
After approximately five seconds, the flashing
stops and the display shows the time of day you
set.

Changing the time

You cannot change the time of day if
the Duration or End function
operates.
Press again and again until the indicator for
the Time of Day function flashes.
To set a new time, refer to "Setting the time".

Preheating

Preheat the empty appliance to burn off the
remaining grease.
Preheat the two ovens. Heat up one
oven at a time.
1. Set the maximum temperature.
2. Let the appliance operate for 1 hour.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow is sufficient.

Hob - Daily use

WARNING!

Refer to Safety chapters.

Heat setting

Symbols Function
Off position
1 - 6 Heat settings
Use the residual heat to decrease
energy consumption. Deactivate the
cooking zone approximately 5 - 10
minutes before the cooking process
is completed.
Turn the knob to a necessary heat setting.
To complete the cooking process, turn the knob
to the off position.

Residual heat indicator

WARNING!

There is a risk of burns from residual
heat.

www.zanussi.com 7

Manual

View the manual for the Zanussi ZCV667MWC here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Zanussi ZCV667MWC or do you need help? Ask your question here

Need help?

Do you have a question about the Zanussi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Zanussi ZCV667MWC specifications

Below you will find the product specifications and the manual specifications of the Zanussi ZCV667MWC.

General
BrandZanussi
ModelZCV667MWC
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZCV667MWC below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Zanussi ZCV667MWC available in English?

Yes, the manual of the Zanussi ZCV667MWC is available in English .

Is your question not listed? Ask your question here

No results