Zanussi ZCV66030XA manual

Zanussi ZCV66030XA
8.9 · 1
PDF manual
 · 20 pages
English
manualZanussi ZCV66030XA
Unattended cooking on a hob with fat or oil can be dangerous

and may result in fire.

Never try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire blanket.

Do not store items on the cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Metallic objects such as knives, forks, spoons and lids should

not be placed on the hob surface since they can get hot.

If the glass ceramic surface/ glass surface is cracked, switch

off the appliance to avoid the possibility of electric shock.

Internally the appliance becomes hot when in operation. Do not

touch the heating elements that are in the appliance. Always

use oven gloves to remove or put in accessories or ovenware.

Before maintenance cut the power supply.
Ensure that the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which

may result in shattering of the glass.

If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

The means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

Safety instructions

Installation

WARNING!

Only a qualified person must install
this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied
with the appliance.
Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
Do not pull the appliance by the handle.
The kitchen cabinet and the recess must
have suitable dimensions.
Keep the minimum distance from the other
appliances and units.
Make sure that the appliance is installed
below and adjacent safe structures.
Parts of the appliance carry current. Close
the appliance with furniture to prevent
touching the dangerous parts.
The sides of the appliance must stay
adjacent to appliances or to units with the
same height.
Do not install the appliance on a platform.
Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.

www.zanussi.com 3

Manual

View the manual for the Zanussi ZCV66030XA here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Zanussi ZCV66030XA or do you need help? Ask your question here

Need help?

Do you have a question about the Zanussi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
B
Brigitte TuckJanuary 28, 2022

I do not know how to work the grill on a ZANUSSI ZCV66030XA, Serial number 52908346 - Ås basic as how to turn the dial on

C
colin brammeldMarch 1, 2020

I have no oven ore grill all wrings working both bulbs upper and lower oven blown

T
TerryMay 30, 2022

ZCV66030XA is the hob induction

Zanussi ZCV66030XA specifications

Below you will find the product specifications and the manual specifications of the Zanussi ZCV66030XA.

General
BrandZanussi
ModelZCV66030XA
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZCV66030XA below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

How do I ensure the stove is safely installed and used?

To ensure the Zanussi ZCV66030XA stove is safely installed and used, follow these steps: 1. Install a stabilizing means to prevent tipping of the appliance. Refer to the Installation chapter in the manual for guidance. 2. All electrical connections should be made by a qualified electrician. Ensure that the appliance is properly grounded and that the electrical information on the rating plate matches the power supply. If there are any discrepancies, contact an electrician. 3. Use a correctly installed shockproof socket and avoid using multi-plug adapters and extension cables. Keep the mains cables away from the appliance door, especially when it is hot. 4. The shock protection of live and insulated parts must be securely fastened and not removable without tools. 5. Connect the mains plug to the mains socket only after the installation is complete. Ensure that there is easy access to the mains plug after installation. 6. Do not connect the mains plug if the mains socket is loose. Pull the mains plug to disconnect the appliance, rather than pulling the mains cable. 7. Use only correct isolation devices, such as line protecting cut-outs, fuses, earth leakage trips, and contactors. 8. Fully close the appliance door before connecting the mains plug to the mains socket. 9. Use the appliance in a household setting only and do not change its specifications. 10. Ensure that the ventilation openings are not blocked and do not leave the appliance unattended during operation. 11. Deactivate the appliance after each use and exercise caution when opening the appliance door while it is in operation, as hot air can be released. 12. Avoid operating the appliance with wet hands or when it has contact with water. 13. Do not use the appliance as a work surface or for storage. 14. Take precautions to prevent fire and explosion risks. Keep flames or heated objects away from fats and oils when cooking with them. Do not put flammable products or wet items near or on the appliance. 15. Be careful when opening the appliance door, especially when using ingredients with alcohol, as a mixture of alcohol and air can be hazardous. 16. To prevent damage to the appliance, avoid placing ovenware or other objects directly on the bottom. Do not put water directly into the hot appliance or keep moist dishes and food inside after cooking. Be cautious when removing or installing accessories. 17. Discoloration of the enamel does not affect the appliance's performance and is not considered a defect. 18. Use a deep pan for moist cakes to prevent stains from fruit juices. Avoid placing hot cookware on the control panel and ensure that cookware does not boil dry. 19. Take care to prevent objects or cookware from falling on the appliance, as this can damage the surface. By following these steps, you can safely install and use the Zanussi ZCV66030XA stove.

What should I do before using the stove for the first time?

Before using the Zanussi ZCV66030XA stove for the first time, there are a few important steps to follow: 1. Safety precautions: Ensure that the cooking surfaces are clear and free from any items. Do not store anything on the stove. Also, avoid placing metallic objects such as knives, forks, spoons, and lids on the hob surface as they can get hot. 2. Check for any damage: Before using the stove, inspect the glass ceramic surface or glass surface for any cracks. If you notice any cracks, switch off the appliance to avoid the risk of electric shock. 3. Familiarize yourself with the appliance: Take the time to read and understand the safety instructions provided in the manual. This will help you operate the stove safely and avoid any potential hazards. 4. Preheat the appliance: Before using the oven, it is recommended to preheat it to burn off any remaining grease. Set the maximum temperature and let the appliance operate for about an hour. During this process, you may notice an odor and some smoke, which is normal. 5. Clean the appliance: Remove all accessories from the stove and clean it thoroughly before the first use. Refer to the "Care and cleaning" chapter in the manual for detailed instructions on how to clean the stove. By following these steps, you can ensure a safe and optimal experience when using the Zanussi ZCV66030XA stove for the first time.

How do I use the hob on a daily basis?

To use the hob on the Zanussi ZCV66030XA stove on a daily basis, follow these steps: 1. Safety first: Before using the hob, make sure to read and understand the safety instructions provided in the manual. 2. Preheating: Preheat the empty hob to burn off any remaining grease. Set the maximum temperature and let the hob operate for 1 hour. During this process, accessories may become hotter than usual, and there may be some odor and smoke. This is normal, but ensure that there is sufficient airflow in the kitchen. 3. Heat settings: The hob has heat settings from 1 to 6. To activate a cooking zone, turn the knob to the necessary heat setting. Use the residual heat to decrease energy consumption by deactivating the cooking zone approximately 5-10 minutes before the cooking process is completed. To complete the cooking process, turn the knob to the off position. 4. Residual heat indicator: Be cautious of residual heat. The hob has an indicator that comes on when a cooking zone is hot. Avoid touching or placing anything on a cooking zone that is indicated as hot to prevent burns. Remember to refer to the safety chapters in the manual for more detailed information and guidelines. Enjoy using your Zanussi ZCV66030XA stove!

How do I use the oven on a daily basis?

To use the oven on a daily basis for the Zanussi ZCV66030XA stove, follow these steps: 1. Before first use, remove all accessories from the appliance and clean it. Put the accessories back in their initial position. 2. Preheat the empty oven to burn off any remaining grease. Set the maximum temperature and let the oven operate for 1 hour. Note that accessories can become hotter than usual and the appliance may emit an odor and smoke during this process. 3. For daily use of the hob, turn the knob to the necessary heat setting. To decrease energy consumption, you can use the residual heat by deactivating the cooking zone approximately 5-10 minutes before the cooking process is completed. Turn the knob to the off position to complete the cooking process. 4. Be cautious of residual heat, as there is a risk of burns. The residual heat indicator will come on when a cooking zone is hot. 5. To use the oven, refer to the temperature and baking times in the tables as guidelines. The top oven is smaller and has 3 shelf positions, suitable for cooking smaller quantities of food. The main oven is larger and suitable for cooking larger quantities of food. 6. When baking, adapt your usual settings (temperature, cooking times) and shelf positions to the values in the tables. The manufacturer recommends using a lower temperature the first time. If you cannot find the settings for a special recipe, look for a similar one. You can extend baking times by 10-15 minutes if baking cakes on more than one level. 7. For longer baking times, you can deactivate the oven approximately 10 minutes before the end of the baking time and use the residual heat. Remember to always follow safety precautions mentioned in the manual.

Is the manual of the Zanussi ZCV66030XA available in English?

Yes, the manual of the Zanussi ZCV66030XA is available in English .

Is your question not listed? Ask your question here

No results