Zanussi ZCG63040XA manual

Zanussi ZCG63040XA
8.8 · 1
PDF manual
 · 24 pages
English
manualZanussi ZCG63040XA
Internally the appliance becomes hot when in operation. Do not

touch the heating elements that are in the appliance. Always

use oven gloves to remove or put in accessories or ovenware.

Before maintenance cut the power supply.
Ensure that the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which

may result in shattering of the glass.

If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

This appliance is suitable for the following markets:

GB IE

INSTALLATION
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with
the appliance.
Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
Do not pull the appliance by the handle.
The kitchen cabinet and the recess must have
suitable dimensions.
Keep the minimum distance from the other
appliances and units.
Make sure that the appliance is installed below
and adjacent safe structures.
Parts of the appliance carry current. Close the
appliance with furniture to prevent touching the
dangerous parts.
The sides of the appliance must stay adjacent to
appliances or to units with the same height.
Do not install the appliance on a platform.
Do not install the appliance adjacent to a door
or under a window. This prevents hot cookware
to fall from the appliance when the door or the
window is opened.
Make sure to install a stabilizing means in order
to prevent tipping of the appliance. Refer to
Installation chapter.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electrical
shock.
All electrical connections should be made by a
qualified electrician.
The appliance must be earthed.
Make sure that the electrical information on the
rating plate agrees with the power supply. If not,
contact an electrician.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and extension
cables.
Do not let mains cables touch or come near the
appliance door, especially when the door is hot.
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
If the mains socket is loose, do not connect the
mains plug.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an isolation
device which lets you disconnect the appliance
from the mains at all poles. The isolation device
3

Manual

View the manual for the Zanussi ZCG63040XA here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Zanussi ZCG63040XA or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Zanussi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Zanussi ZCG63040XA specifications

Below you will find the product specifications and the manual specifications of the Zanussi ZCG63040XA.

General
BrandZanussi
ModelZCG63040XA
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZCG63040XA below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Zanussi ZCG63040XA available in English?

Yes, the manual of the Zanussi ZCG63040XA is available in English .

Is your question not listed? Ask your question here

No results