Zanussi ZCG63040XA manual

Zanussi ZCG63040XA
8.8 · 1
PDF manual
 · 24 pages
English
manualZanussi ZCG63040XA
A
E
C
B
D
F
Minimum distances
Dimension mm
A 650
B 150
C 2
D 400
E 450
F less than 400
LEVELLING OF THE APPLIANCE
Use small feet on the bottom of appliance to set the
appliance top surface level with other surfaces.
THE STABILITY CHAIN
CAUTION! Install the stability chain to
prevent the appliance from tilting. The
stability chain only works when the
appliance is put in a correct area.
1. Measure down 180 mm from the appliance top
surface, then measure right 30 mm.
2. Mark the position of the wall and this gives
anchor point for the stability chain.
30 mm
180 mm
OTHER TECHNICAL DATA
WARNING! These instructions are
only valid in the countries whose
symbols appear on this booklet's
cover.
Gas category: I2H
Gas supply: G20 (2H) 20 mbar
Voltage: 220-240 V
Frequency: 50/60 Hz
GAS BURNERS
BURNER NORMAL POWER kW
Natural Gas
INJECTOR MARK 1/100 mm Btu/h
Auxiliary 1 70 3412
Semi-rapid 1.9 96 6483
20

Manual

View the manual for the Zanussi ZCG63040XA here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Zanussi ZCG63040XA or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Zanussi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Zanussi ZCG63040XA specifications

Below you will find the product specifications and the manual specifications of the Zanussi ZCG63040XA.

General
BrandZanussi
ModelZCG63040XA
Productstove
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZCG63040XA below.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

Is the manual of the Zanussi ZCG63040XA available in English?

Yes, the manual of the Zanussi ZCG63040XA is available in English .

Is your question not listed? Ask your question here

No results