Zanussi ZCG43200BA manual

Zanussi ZCG43200BA
7 · 1
PDF manual
 · 28 pages
English
manualZanussi ZCG43200BA

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy
You cannot activate the appli-
ance.
The appliance is not connected
to an electrical supply or it is
connected incorrectly.
Check if the appliance is correct-
ly connected to the electrical
supply.
You cannot activate the appli-
ance.
The fuse is released. Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
You cannot activate the appli-
ance.
The appliance is too hot. Wait for the appliance to cool
down.
The burners do not work. There is no gas supply. Check the gas connection.
There is no spark when you try to
activate the spark generator.
Burner cap and crown are placed
incorrectly.
Place the burner cap and crown
correctly.
The flame extinguishes immedi-
ately after ignition.
Thermocouple is not heated up
sufficiently.
After lightning the flame, keep the
knob pushed for equal or less
than 10 seconds.
The flame ring is uneven. Burner crown is blocked with
food residues.
Make sure that the injector is not
blocked and the burner crown is
clean.
The flame colour is orange or yel-
low.
The flame can look orange or yel-
low in some areas of the burner.
This is normal.
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are not
set.
Make sure that the settings are
correct.
The lamp does not operate. The lamp is defective. Replace the lamp.
It takes too long to cook the
dishes or they cook too quickly.
The temperature is too low or too
high.
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.

20 www.zanussi.com

Manual

View the manual for the Zanussi ZCG43200BA here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Zanussi ZCG43200BA or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Zanussi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Zanussi ZCG43200BA specifications

Below you will find the product specifications and the manual specifications of the Zanussi ZCG43200BA.

General
BrandZanussi
ModelZCG43200BA | 948 905 039
Productstove
EAN7332543291731
LanguageEnglish
FiletypeUser manual (PDF)
Design
Product typeFreestanding cooker
Product colorBlack
Control typeButtons, Rotary
Cord length1.6 m
Built-in displayYes
Oven
Number of ovens2
Total oven(s) interior capacity111 L
Total oven power- W
Oven power sourceNatural gas
Oven size-
Oven gross capacity77 L
Oven power- W
Noise level- dB
Cool doorYes
Oven net capacity77 L
Oven 2
Oven 2 gross capacity34 L
Oven 2 grillYes
Hob
Hob typeGas
Number of cooking zones4 zone(s)
Number of gas cooking zones4 zone(s)
Hob coverYes
Power
Energy efficiency classA
Energy consumption (conventional)1.73 kWh
Energy consumption (forced convection)- kWh
Energy consumption (conventional)6.23 MJ
Energy consumption (forced convection)- MJ
Weight & dimensions
Width550 mm
Depth600 mm
Height900 mm
Weight56500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZCG43200BA below.

What is the weight of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a weight of 56500 g.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

What is the height of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a height of 900 mm.

What is the width of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a width of 550 mm.

What is the depth of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a depth of 600 mm.

What energy label does the Zanussi ZCG43200BA have?

The Zanussi ZCG43200BA has energy label A.

Is the manual of the Zanussi ZCG43200BA available in English?

Yes, the manual of the Zanussi ZCG43200BA is available in English .

Is your question not listed? Ask your question here

No results