Zanussi ZCG43200BA manual

Zanussi ZCG43200BA
7 · 1
PDF manual
 · 28 pages
English
manualZanussi ZCG43200BA
Catalytic cleaning works only in the main oven.
1. Clean the oven floor with warm water and
washing up liquid, then dry it.
2. Set the maximum temperature and let oven
operate for 1 hour.
3. Set the oven temperature to 250 °C and let
the oven operate for 1 hour.
4. When the appliance is cool, clean it with a
soft and moist sponge.
Removing and cleaning the door
glasses - top oven
The door glass in your product can
be different in type and shape from
the examples you see in the image.
The number of glasses can also be
different.
1. Open the door.
2. Hold the door trim on the top edge of the
door at the two sides and push inwards to
release the clip seal.
1
2
1
3. Pull the door trim to the front to remove it.
4. Remove the glass panels.
To install the panels, do the same steps in
reverse.
Removing and cleaning the door
glasses - main oven
The door glass in your product can
be different in type and shape from
the example you see in the image.
The number of glasses can also be
different.
1. Push the door trim at one side to remove it.
1
2
A
2. Pull up the trim.
3. Remove the glass panels.
To replace the glass panels, do the
same steps in reverse. Before you
lower the trim, attach the A trim part
to the door. Refer to the image.
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp.
The lamp and the lamp glass cover
can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back
of the cavity.
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with a suitable 300
°C heat-resistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
www.zanussi.com 19

Manual

View the manual for the Zanussi ZCG43200BA here, for free. This manual comes under the category stoves and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Zanussi ZCG43200BA or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Zanussi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Zanussi ZCG43200BA specifications

Below you will find the product specifications and the manual specifications of the Zanussi ZCG43200BA.

General
BrandZanussi
ModelZCG43200BA | 948 905 039
Productstove
EAN7332543291731
LanguageEnglish
FiletypeUser manual (PDF)
Design
Product typeFreestanding cooker
Product colorBlack
Control typeButtons, Rotary
Cord length1.6 m
Built-in displayYes
Oven
Number of ovens2
Total oven(s) interior capacity111 L
Total oven power- W
Oven power sourceNatural gas
Oven size-
Oven gross capacity77 L
Oven power- W
Noise level- dB
Cool doorYes
Oven net capacity77 L
Oven 2
Oven 2 gross capacity34 L
Oven 2 grillYes
Hob
Hob typeGas
Number of cooking zones4 zone(s)
Number of gas cooking zones4 zone(s)
Hob coverYes
Power
Energy efficiency classA
Energy consumption (conventional)1.73 kWh
Energy consumption (forced convection)- kWh
Energy consumption (conventional)6.23 MJ
Energy consumption (forced convection)- MJ
Weight & dimensions
Width550 mm
Depth600 mm
Height900 mm
Weight56500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Zanussi ZCG43200BA below.

What is the weight of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a weight of 56500 g.

Can I use my pans on induction?

Nowadays almost all pans are suitable for induction. You can easily test whether your old pans can also be used on induction by holding a magnet against the bottom of the pan. If the magnet stays on the pan, your old pan is suitable for induction.

How do I reset my induction hob?

Most induction hobs can be reset by disconnecting the hob from power by unplugging it from the power outlet. You will then have to wait at least 60 minutes.

What is a Perilex connection?

A Perilex connection is a special connection that can handle more power than a normal connection. This connection has five holes instead of two and is often used for induction hobs.

Is cooking on induction dangerous?

No, cooking on induction is not dangerous.

What is the height of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a height of 900 mm.

What is the width of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a width of 550 mm.

What is the depth of the Zanussi ZCG43200BA?

The Zanussi ZCG43200BA has a depth of 600 mm.

What energy label does the Zanussi ZCG43200BA have?

The Zanussi ZCG43200BA has energy label A.

Is the manual of the Zanussi ZCG43200BA available in English?

Yes, the manual of the Zanussi ZCG43200BA is available in English .

Is your question not listed? Ask your question here

No results