Do you have a question about the Yamaha YAS-103 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Yamaha YAS-103 owners to properly answer your question.
Robert Hinton,
17-1-2021 19:37:02
No comments
The sound bar has stopped receiving the signal from the TV. It is connected by an optical cable from the correct connection on the TV and into the TV socket on the sound bar. The input on the sound bar is set to TV. The tv sound system is set to receive the signal from the sound bar and not the TV speakers. It worked until yesterday and found not to work as it was switched on to do so. I know that the signal can be lost by pressing the input button on the remote by mistake. If that was done I would have expected it then to be corrected by making sure all the corrections were as I have described them . I have checked the mute button has not caused it by pressing it twice (on and off).
Is there a troubleshooter on the system that I could set to work?
View the manual for the Yamaha YAS-103 here, for free. This manual comes under the category Sound Bars and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Yamaha YAS-103 or do you need help? Ask your question here
Below, you will find the most frequently asked questions about the Yamaha YAS-103.
What is the weight of the Yamaha YAS-103?
The Yamaha YAS-103 has a weight of 4000 g.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
How can I best clean my Soundbar?
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Wat is Dolby Atmos?
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
What is bluetooth?
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
What is the height of the Yamaha YAS-103?
The Yamaha YAS-103 has a height of 115 mm.
What is the width of the Yamaha YAS-103?
The Yamaha YAS-103 has a width of 890 mm.
What is the depth of the Yamaha YAS-103?
The Yamaha YAS-103 has a depth of 91 mm.
Is the manual of the Yamaha YAS-103 available in English?
Yes, the manual of the Yamaha YAS-103 is available in English .
The sound bar has stopped receiving the signal from the TV. It is connected by an optical cable from the correct connection on the TV and into the TV socket on the sound bar. The input on the sound bar is set to TV. The tv sound system is set to receive the signal from the sound bar and not the TV speakers. It worked until yesterday and found not to work as it was switched on to do so. I know that the signal can be lost by pressing the input button on the remote by mistake. If that was done I would have expected it then to be corrected by making sure all the corrections were as I have described them . I have checked the mute button has not caused it by pressing it twice (on and off). Is there a troubleshooter on the system that I could set to work?