Yamaha RX-V475 manual

Yamaha RX-V475
8.7 · 29
PDF manual
 · 112 pages
English
manualYamaha RX-V475

View the manual for the Yamaha RX-V475 here, for free. This manual comes under the category receivers and has been rated by 29 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Yamaha RX-V475 or do you need help? Ask your question here

Need help?

Do you have a question about the Yamaha and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Yamaha owners to provide you with a good answer.

Jasper Pieters • 24-2-20221 comment

When turning up volume, the sound cuts off and message , check sp wires, comes up

When turning up volume, the sound cuts off and message , check sp wires, comes up
View photo
James Smith • 7-6-2022

I had to reconfigure system. Checked wires. Went back through setup and moved back to 3.1 Surround and took rear speakers out. Also went into setup and made sure they were OFF. Currently no other issue.

Answer this question
Claus müller • 4-12-2015No comments

Can I connect and listen with Bluetooth headphones on the rx-v475?

This message has been automatically translated
Answer this question
herb • 29-12-2022No comments

Device error, on my RX-V475

Answer this question
charles Peddigree • 18-8-2019No comments

how do I connect a HISENSE tv to my RX-V475?

Answer this question
Michael • 6-8-2019No comments

How do you relabel the receiver

Answer this question
Mike Skubiak • 24-4-2019No comments

Is there an optical port on the Yamaha RX-V475 Receiver?

Answer this question
Kevin Asselstine • 28-1-2017No comments

When I replugged my amp in it says version error decoder off, and I can not get my cable to work, How do I turn this back on

Answer this question
Lewis Claffey • 9-6-2015No comments

My question pertains to the RAV494 remote. I entered the code so the remote operates my TV. However the function is limited to power on/off, volume control, mute, and checking the input for the TV. How does one change the TV input using the RAV494. Without being able to change the input I must use my old TV remote solely for that purpose. I would hope to retire the old remote and be able to more than look at the current input for the TV with the RAV494. Any help? My TV is a Mitsubishi WD73735 and I used the code 0093 to communicate with the TV..

Answer this question
Don Paul • 10-2-2015No comments

How to hook up a remote amplified using co-ax audio cables to enable all audio including digital. I can get audio for CD,Phono, vcr, etc, but I don't get the audio signal to the remote amplifier for TV programs of Apple TV functions. Please help.

Answer this question
Sid Courtney • 29-12-2014No comments

Receiver keeps shutting off after 120 minutes. Have reset the sleep mode 20 times to off and it still shuts off after 120 minutes. Is there something else going on here???

Answer this question

Number of questions: 14

The Yamaha RX-V475 is a receiver that delivers powerful audio output, making it suitable for creating a surround sound experience. With a power output of 80W per channel at 8 Ohms and 5.1 channels, it provides clear and crisp sound quality. Additionally, it has a power output of 115W per channel at 1KHz and 8 Ohms, as well as 135W per channel at 1KHz and 6 Ohms, allowing for ample volume and intensity. The dynamic power per channel at 4 Ohms is 130W, further enhancing the audio experience. In terms of connectivity options, the Yamaha RX-V475 offers multiple ports. It features five HDMI inputs, ensuring compatibility with various devices such as Blu-ray players and gaming consoles. Additionally, it has two component video inputs (YPbPr/YCbCr), five composite video inputs, four audio (L/R) inputs, and two digital audio optical and coaxial inputs. These provide flexible options for connecting different audio and video sources. Furthermore, the receiver includes an Ethernet LAN (RJ-45) port for networking capabilities, allowing for convenient access to internet radio and music streaming services. It also has a USB port, enabling playback of audio files from external storage devices. The Yamaha RX-V475 is designed to be visually appealing and user-friendly. The receiver's sleek and modern appearance seamlessly integrates into any entertainment setup. Its intuitive interface and easy-to-use controls facilitate effortless operation. In summary, the Yamaha RX-V475 is a high-performance receiver that delivers impressive audio quality and offers a range of connectivity options. With its power output, diverse input ports, and networking capabilities, it is designed to enhance the overall audio experience in any home entertainment system.

General
Yamaha
RX-V475 | RX-V475TI
receiver
4957812530989
English
User manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)80 W
Audio output channels5.1 channels
Power output per channel (1KHz@8 Ohm)115 W
Power output per channel (1KHz@6 Ohm)135 W
Dynamic power per channel (4 Ohm)130 W
Total Harmonic Distortion (THD)0.9 %
Audio D/A Converter (DAC)24-bit/192kHz
Receiver typeSurround
Inputs
HDMI in5
Component video (YPbPr/YCbCr) in2
Composite video in5
Audio (L/R) in4
Digital audio optical in2
Digital audio coaxial in2
Ethernet LAN (RJ-45) ports1
USB ports quantity1
Outputs
Number of HDMI outputs1
Component video (YPbPr/YCbCr) out1
Composite video out1
Audio (L/R) out1
Headphone outputs1
Ports & interfaces
Speakers connectivity type-
Connectivity technologyWired
Network
Ethernet LANYes
Wi-Fi-
Radio
Supported radio bandsAM, FM
Optical drive
Optical drive includedNo
Storage
Card reader integratedNo
Technical details
DisplayLED
Audio decodersDolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio
Handheld remote controlYes
Product colorMetallic
Volume controlRotary
On Screen Display (OSD)Yes
Apple docking compatibilityNot supported
AirPlayYes
Power
Power consumption (standby)0.1 W
Weight & dimensions
Width435 mm
Depth315 mm
Height161 mm
Weight8100 g
Video
3DYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Yamaha RX-V475 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Yamaha RX-V475?

The Yamaha RX-V475 has a weight of 8100 g.

What is the height of the Yamaha RX-V475?

The Yamaha RX-V475 has a height of 161 mm.

What is the width of the Yamaha RX-V475?

The Yamaha RX-V475 has a width of 435 mm.

What is the depth of the Yamaha RX-V475?

The Yamaha RX-V475 has a depth of 315 mm.

How do I connect my Yamaha RX-V475 receiver to external audio sources?

To connect external audio sources to your Yamaha RX-V475 receiver, use HDMI cables for high-quality digital audio and video connection. You can also use optical or coaxial cables for digital audio, or analog RCA cables for older devices. Make sure to select the appropriate input source on the receiver and on your external source for proper connection.

How can I optimize the sound settings on my Yamaha RX-V475 receiver?

To optimize sound settings on your Yamaha RX-V475, go to the "Audio" menu in the receiver's setup. Explore options such as adjusting the speaker configuration, room size, and sound modes. Experiment with these settings to find the best audio experience for your particular setup and preferences.

What is the best way to set up and calibrate the surround sound speakers?

To set up and calibrate surround sound speakers on your Yamaha RX-V475, start by using the receiver's built-in YPAO (Yamaha Parametric Acoustic Optimizer) feature. Use the included microphone to take automated measurements of your room's acoustic characteristics. The receiver will then adjust the sound settings to optimize the audio output for your specific environment.

How can I control the Yamaha RX-V475 receiver from my smartphone or tablet?

To control your Yamaha RX-V475 receiver using a smartphone or tablet, you need to download and install the Yamaha AV Controller app. Connect your mobile device to the same Wi-Fi network as the receiver and launch the app. You will then have access to various controls, including volume adjustment, input selection, and sound mode options.

How can I troubleshoot common issues with my Yamaha RX-V475 receiver?

If you encounter common issues with your Yamaha RX-V475 receiver, such as no sound, intermittent audio, or connectivity problems, start by checking all cable connections to ensure they are secure and properly plugged in. You can also try power cycling the receiver by turning it off and unplugging it for a few minutes before plugging it back in. If the issue persists, refer to the troubleshooting section in your manual or reach out to Yamaha customer support for further assistance.

What is the power output per channel of the Yamaha RX-V475?

The power output per channel of the Yamaha RX-V475 is 80 W.

How many audio output channels does the Yamaha RX-V475 have?

The Yamaha RX-V475 has 5.1 audio output channels.

What is the total harmonic distortion (THD) of the Yamaha RX-V475?

The total harmonic distortion (THD) of the Yamaha RX-V475 is 0.9%.

How many HDMI inputs does the Yamaha RX-V475 have?

The Yamaha RX-V475 has 5 HDMI inputs.

How many USB ports does the Yamaha RX-V475 have?

The Yamaha RX-V475 has 1 USB port.

Is the manual of the Yamaha RX-V475 available in English?

Yes, the manual of the Yamaha RX-V475 is available in English .

Is your question not listed? Ask your question here

No results