Xerox 4110 manual

Xerox 4110
5.9 · 1
PDF manual
 · 498 pages
English
manualXerox 4110
Xerox 4110/4590 User Guide
12-9
12. Problem Solving

Image Quality Problems

When image quality of the printed result is poor, choose the

closest symptom in the following table and perform the required

remedy.

If image quality is not improved by performing the relevant

remedy, contact the Customer Support Center.

Symptoms Check Remedy

The copy is dirty. Is the document glass or the
document cover dirty?
Clean the document glass or the document
cover.
Refer to “Cleaning the Document Cover
and Document Glass” on page 11-15.
Is the document made of
highly transparent material
like a transparency?
If the document is highly transparent,
marks on the document cover will be
copied. Place a white sheet of paper on the
document and make a copy.
Is the document colored, of
a rough texture or a
blueprint?
Either adjust the copy density or image
quality and then retry copying.
Refer to “Image Quality” on page 3-26,
“Lighten/Darken (Adjusting the Copy
Density)” on page 3-27.
Are you making copies of
glossy printing paper?
Glossy printing paper sticks easily to the
document glass and shadows are
sometimes copied and reproduced as dirt.
Place a transparency or highly transparent
film under the document and retry copying.
The copy has
black lines.
Is the scanning glass on the
feeder dirty?
Clean the document glass.
Refer to “Cleaning the Document Cover
and Document Glass” on page 11-15.
The copy is too
dark.
Is the copy density set to
Dark?
Adjust the copy density.
Refer to “Lighten/Darken (Adjusting the
Copy Density)” on page 3-27.
The copy is too
light.
Is the density of the
document too light?
Is the copy density set to
Light?
The copy shifts
slightly.
Is the paper shifting or is the
leading edge of the paper
not loaded flush with the
tray corners?
Align the edges of the paper and load the
paper again so that is flush against the
paper tray corners.
Refer to “Loading Paper” on page 8-4.

Manual

View the manual for the Xerox 4110 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Xerox 4110 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Xerox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Xerox 4110 specifications

Below you will find the product specifications and the manual specifications of the Xerox 4110.

General
BrandXerox
Model4110
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Xerox 4110 below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Xerox 4110 available in English?

Yes, the manual of the Xerox 4110 is available in English .

Is your question not listed? Ask your question here

No results