Xerox 4110 manual

Xerox 4110
5.9 · 1
PDF manual
 · 498 pages
English
manualXerox 4110
Xerox 4110/4590 User Guide
12-4
12. Problem Solving

Machine Trouble

If you think some trouble is occurring on the machine, check the

machine status again.

Precision components and high-voltage power supplies are used on the machine.

Never open or remove machine covers that are screwed shut unless specifically

instructed in the User Guide. A high-voltage component can cause electric shocks.

When opening the panels and covers that are screwed shut to install or detach

optional accessories, be sure to follow instructions in the respective the User Guide.

Do not try to alter the machine configuration or modify any parts. Doing so might

cause machine malfunction or fire.

Symptoms Check Remedy

Power is not
switched On.
Is the power switch on the
machine turned off?
Turn the power switch on.
Refer to “Power on/off” on page 2-8.
Is the power cord plugged
into the power outlet?
Turn the power switch off and then firmly
plug in the power cord. Then turn the
power switch on.
Refer to “Power on/off” on page 2-8.
Is the power cord
disconnected from the
machine or the rear of the
rack?
Is power of the correct
voltage being supplied?
Make sure that the power supply is
200 -240 V (volts), 15 A (amperes).
Make sure that power of capacity
compatible with the specified maximum
power consumption of the machine
(2.8 - 3.1 KVA) is being supplied.
Display is dark. Is the Power Saver button
on?
The machine is in the Power Saver mode.
Press the Power Saver button on the
Control Panel to cancel the Power Saver
mode.
Refer to “Power Saver Mode” on page 2-
10.
Is the brightness dial set too
low?
Use the brightness dial to adjust display
brightness.
Refer to “User Interface (UI)” on page 2-5.
Unable to print,
or
unable to copy.
Is a message displayed on
the Control Panel's display?
Follow the instructions displayed to solve
the problem.
Is the printer mode Offline? Press the Machine Status button and
confirm the Printer Mode in the Machine
Status screen. If Printer Mode is Offline,
select Online in the Printer Mode screen.
Is the power cord
disconnected from the
machine or the rear of the
rack?
Turn the power switch off and then firmly
plug in the power cord. Then turn the
power switch on.
Refer to “Power on/off” on page 2-8.

Manual

View the manual for the Xerox 4110 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Xerox 4110 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Xerox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Xerox 4110 specifications

Below you will find the product specifications and the manual specifications of the Xerox 4110.

General
BrandXerox
Model4110
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Xerox 4110 below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Xerox 4110 available in English?

Yes, the manual of the Xerox 4110 is available in English .

Is your question not listed? Ask your question here

No results