Xerox 4110 manual

Xerox 4110
5.9 · 1
PDF manual
 · 498 pages
English
manualXerox 4110
Xerox 4110/4590 User Guide
8-4
8. Paper and Other Media

Loading Paper

Following describes how to load paper in Trays 1 to 4, Tray 5
(Bypass), Trays 6 to 7 and Interposer.
! About types of paper loaded in trays
The machine automatically detects the size and orientation of
loaded paper in trays. The paper type, however, must be set.
Normally, plain paper is set to each of the trays. Change the paper
type settings if you load other paper types. Paper can also be
named and set as user-defined paper. Up to five paper types can
be set as user-defined paper.
For details about changing paper type, refer to "Paper Tray
Attributes" in the System Administration Guide.
! About automatic tray selection
Automatic tray selection is active if Auto is selected for Auto
Paper Select (Type). If the machine judges that there are two or
more corresponding trays in automatic tray selection, the machine
gives higher priority to the tray having the highest Paper Type
Priority set at Paper Tray Settings. During automatic tray
selection, trays whose Paper Type Priority setting is set to Off
are not targeted in Automatic Tray Selection. Also, if the Paper
Priority setting is exactly the same, automatic tray selection is
determined by Tray Priority.
NOTE: Tray 5 (Bypass) cannot be selected in automatic tray
selection.
When the machine runs out of paper during copying or
printing, select the tray containing the paper of the same
size and orientation that was being used for copying or
printing, and continue copying or printing (Auto Tray Switch
feature). During this operation, a tray containing paper of
type whose Paper Priority setting is set to Off cannot be
switched to.
For information about setting Paper Type, Paper Type Priority,
Paper Tray Priority, and setting the paper substitute feature, refer
to "Paper Tray Settings" in the System Administration Guide. The
same settings can also be made from CentreWare Internet
Services. See your System Administrator for help.

Manual

View the manual for the Xerox 4110 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Xerox 4110 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Xerox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Xerox 4110 specifications

Below you will find the product specifications and the manual specifications of the Xerox 4110.

General
BrandXerox
Model4110
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Xerox 4110 below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Xerox 4110 available in English?

Yes, the manual of the Xerox 4110 is available in English .

Is your question not listed? Ask your question here

No results