Xerox 4110 manual

Xerox 4110
5.9 · 1
PDF manual
 · 498 pages
English
manualXerox 4110
Xerox 4110/4590 User Guide
7-5
7. Stored Programming

Registering Stored Program (Build Job)

Stored program for Build Job can record up to 40 features. In
addition, up to 100 actions can be registered with a stored
program.
The procedure for registering actions with a Stored Program is
detailed below.
KEY POINT: There are two situations where a stored program
may become invalid:
- when default values or paper tray settings are changed in the
system setting
- when buttons are added or removed from the touch screen since
stored programming only remembers the location of a button on
the screen, not the name of the button.
Button positions can change when, after a stored program is
registered, a job flow, job template, or recipient, for example, is
added or deleted.
NOTE: If the Interrupt button is pressed, if the Auto Reset feature
causes a time-out, or if a popup window (paper jam, for example)
appears, then the Stored Program record operation is cancelled.
1. From the All Services screen, select Setup Menu and then
Stored Program. Select Store Build Job.

2. Select the number to register.

NOTE: Once a job is stored to a button, it cannot be overwritten.
Select to display the previous screen and select to
display the next screen.

3. Set the feature you wish to register.

NOTE: A tone is generated while registering to job memory.
4. Press the Start button or Clear All button.
5. The steps are stored. Select Close. You may wish to rename
the Stored Program. See “Naming/Renaming a Stored
Program” on page 7-7 for more information.

Manual

View the manual for the Xerox 4110 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Xerox 4110 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Xerox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Xerox 4110 specifications

Below you will find the product specifications and the manual specifications of the Xerox 4110.

General
BrandXerox
Model4110
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Xerox 4110 below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Xerox 4110 available in English?

Yes, the manual of the Xerox 4110 is available in English .

Is your question not listed? Ask your question here

No results