Xerox 4110 manual

Xerox 4110
5.9 · 1
PDF manual
 · 498 pages
English
manualXerox 4110
Xerox 4110/4590 User Guide
5-46
5. Mailbox Management

Finishing

This feature allows you how to output document copies. When
stapling is specified, each set of copies can be stapled and then
output.
1. From the All Services window, select Check Mailbox and
then Copy & Print Jobs.
2. Select the mailbox you want to open and then select Change
Settings/Print. Select Finishing.

3. Select any item.

4. Select Save to keep your choice.
! Document Specified
Holds settings at the time of document preservation.
! Collated
The machine can output sheets sorted into sets that are arranged
in page order.
! Uncollated
The machine can output the specified number of copies and sort
sheets by page.
! Staple Position
You can set the position for stapling. To use the settings that were
saved with the document, select Document Specified. If you
select More..., the Finishing - Stapling screen appears.
NOTE: The number of pages that can be stapled is from 2 to 50
(P paper) when the staple cartridge for 50 sheets XB is installed.
The number is from 2 to 100 (P paper) when the staple cartridge
for 100 sheets XA is installed. Plain paper, recycled paper, side 2
paper, punched paper, tab paper 1, and custom paper 1 to 5 can
be stapled.

Manual

View the manual for the Xerox 4110 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Xerox 4110 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Xerox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Xerox 4110 specifications

Below you will find the product specifications and the manual specifications of the Xerox 4110.

General
BrandXerox
Model4110
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Xerox 4110 below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Xerox 4110 available in English?

Yes, the manual of the Xerox 4110 is available in English .

Is your question not listed? Ask your question here

No results