Xerox 4110 manual

Xerox 4110
5.9 · 1
PDF manual
 · 498 pages
English
manualXerox 4110
Xerox 4110/4590 User Guide
3-90
3. Copy
! Chapter Division/Separators
Displays the Build Job - Chapter Division/Separators screen.
! Separators
Displays the Build Job - Separators screen.
For information about watermark feature, refer to “Build Job -
Separators Screen” on page 3-88.
! Sheet Change
Displays the Build Job - Sheet Change screen. Using the
numeric keypad to change the number of copies. You can change
the number of copies.
! Sample Set
When making multiple copies, you can output a single sample in
advance. Making sample copy allows you to confirm that the copy
appearance meets your expectations. After checking the sample
copy, you can choose whether to make the remaining copies, or to
cancel copying.

Sample Set Screen

(Confirming the copy appearance meets your expectations)

This feature allows you to continue making copies after making
and examining a sample set of copies, when making multiple
copies. You can select to continue or cancel the job after the
confirmation and can also change the number of copies. The
sample set is included in the number of copies you specified.
When making the remaining copies, the number of copies which
pulled the part of a sample copy from the specified number of
copies is printed.
1. From the Job Assembly tab, select Build Job and then select
Sample Set.

2. Make a selection.

Manual

View the manual for the Xerox 4110 here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Xerox 4110 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Xerox and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Xerox 4110 specifications

Below you will find the product specifications and the manual specifications of the Xerox 4110.

General
BrandXerox
Model4110
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Xerox 4110 below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

Is the manual of the Xerox 4110 available in English?

Yes, the manual of the Xerox 4110 is available in English .

Is your question not listed? Ask your question here

No results