View the manual for the Worcester MT10 here, for free. This manual comes under the category thermostat and has been rated by 5 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Worcester MT10 or do you need help? Ask your question here
The Worcester MT10 is a programmable digital thermostat that allows you to control the temperature of your home or office. It features a large, easy-to-read display and intuitive controls that make it simple to adjust the settings and program the thermostat to suit your needs. Thanks to its advanced adaptive technology, the MT10 is able to learn your heating and cooling patterns and automatically adjust the temperature to maximize your comfort while also minimizing energy usage. It also has a variety of pre-set programs and schedules that allow you to easily create a customized heating and cooling plan to match your routine. In addition to its advanced programming features, the MT10 also has a number of practical functions such as frost protection and holiday mode. It also features a child lock function to ensure that children are unable to adjust the temperature settings without your knowledge. Additionally, the MT10 is compatible with a range of Worcester heating and cooling systems, making it easy to integrate into your existing setup. Overall, the Worcester MT10 is a reliable, easy-to-use digital thermostat that provides precise temperature control and energy savings. Its advanced features and intuitive programming make it an excellent choice for both residential and commercial heating and cooling systems.
| Brand | Worcester |
| Model | MT10 |
| Product | thermostats |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Worcester MT10 below.
The best place for the thermostat is the room where you spend the most time, in many cases the living room or kitchen. Place the thermostat about one and a half metres above the floor, not in the sun and not on an outside wall.
If your thermostat has a dead band, your installation is, as it were, 'at rest'. The thermostat only switches on when, for example, the difference deviates more than 2˚C from the set room temperature.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
A possible reason could be that the thermostat is not receiving power. Check if the circuit breaker is tripped or if the thermostat is properly connected to a power source.
To adjust the temperature settings, press the up or down arrows on the thermostat's control panel. Each press will increase or decrease the set temperature by one degree.
It is important to check if the thermostat is set to the correct mode (heat or cool) and if the desired temperature is properly set. Additionally, ensure that the system's heating or cooling equipment is functioning correctly.
To manually override the programmed schedule, press the "Hold" button on the thermostat's control panel. This will enable you to adjust and maintain the desired temperature until you manually release the hold or the next programmed event occurs.
An error code on the thermostat's display indicates a potential issue with the system. Refer to the troubleshooting section in the manual to identify the specific error code and follow the recommended steps to resolve it.
Yes, the manual of the Worcester MT10 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Worcester and is the answer not in the manual?
Question and answer
Number of questions: 28How do I turn the heating a MT10 even though the timer is on. I am in a rental property and don’t know system
3 comments
To activate the heating on the Worcester MT10 thermostat even if the timer is activated, follow these steps: 1. Make sure to disconnect the main power supply before starting any work and observe all relevant safety precautions. 2. The timer should only be installed by an approved installer. 3. The timer must not be connected to the 230V main power supply. 4. On the control panel of the thermostat, find the option for the heating mode. 5. Set the heating mode to "on" or "auto" to enable the heating. 6. If necessary, adjust the temperature settings to your preferred level.
This answer is automatically generatedHow to turn the heat onto an MT10 even though it’s timed to come on
how to increase water pressure in boiler?
The temperature of the water is way too hot. How do I lower the temperature on a MT10 boiler
1 comment
To lower the temperature on the Worcester MT10 boiler, follow these steps: 1. Find the control panel of the boiler. 2. Look for the temperature adjustment buttons or knobs on the control panel. 3. Use the buttons or knobs to decrease the temperature setting. 4. Keep an eye on the display or indicator on the control panel to make sure the temperature is being lowered. 5. Wait for the boiler to adjust to the new temperature setting.
This answer is automatically generatedHot water but lost heating. Low presure. Youtube answers must bed a newer boiler type (the key in the black hole and turnthe black square next to it).How do I increase pressure please?
1 comment
To increase the pressure on the Worcester MT10 thermostat, follow these steps: 1. Turn off the thermostat by setting it to the "off" position. 2. Locate the pressure gauge on your heating system. It is usually located near the boiler or water tank. 3. Check the current pressure reading on the gauge. The ideal pressure range is typically between 1 and 1.5 bar. 4. If the pressure is below the recommended range, you will need to add water to the system to increase the pressure. 5. Locate the filling loop valve, which is usually a lever or a tap connected to the water supply. 6. Slowly open the filling loop valve to allow water to enter the system. Keep an eye on the pressure gauge and stop filling when the pressure reaches the desired range. 7. Close the filling loop valve once the pressure is at the correct level. 8. Turn the thermostat back on by setting it to the desired temperature.
This answer is automatically generatedHow do I know how warm it is as the settings on my boiler are 1 to 6. No degrees or thermostat
1 comment
The Worcester MT10 thermostat does not show temperature readings in degrees Fahrenheit. The boiler settings vary from 1 to 6, but they do not indicate specific temperatures. Without temperature indicators or a thermostat, it is not possible to know the exact temperature.
This answer is automatically generatedGood afternoon! Is the large blue lamp always lit regardless of whether the thermostat is off or on? Is everything okay?
I will be leaving house empty for 4 months, how can I set the 15 degree setting to avoid freezing while I am away?I have a Worcester MT10 boiler.
Mt10 boiler water runs cold then runs scalding hot there is no control on this boiler to alter water temperature, green flame light is lit when running hot water.
1 comment
@Adrian Schofield No response to my question.
Does the Worcester MT 10 need a permanent open vent in the window next to where the boiler is fixed
2 comments
The heating and water keep turning off so I have to keep resetting
What fault is il202
My boiler pressure is really high, how do I decrease it?