Whirlpool WUI75X15HB manual

Whirlpool WUI75X15HB
7.5 · 1
PDF manual
 · 26 pages
English
manualWhirlpool WUI75X15HB
1
How Your Ice Maker Works
When you rst start your ice maker, the water pan will ll and the
system will rinse itself before starting to make ice. The rinsing process
takes about 5 minutes.
Under normal operating conditions, the ice maker will cycle at preset
temperatures. The ice level sensor located in the ice storage bin will
monitor the ice levels.
IMPORTANT: If the water supply to the ice maker is turned off, be
sure to set the ice maker control to OFF.
The Ice Making Process
1. Water is constantly circulated over a freezing plate. As the water
freezes into ice, the minerals in the water are rejected. This
produces a sheet of ice with a low mineral content.

User Guide

Ice MakerLEARN MORE
In an effort to conserve natural resources, this ice maker includes a condensed User Guide. A complete User Guide can
be downloaded at www.whirlpool.com/manuals. The model number is located on the inside of the ice maker.
In the U.S.A., register your ice maker at www.whirlpool.com.
In Canada, register your ice maker at www.whirlpool.ca.
Para una version de estas instrucciones en español, visite www.whirlpool.com.
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS
WARNING
: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basicprecautions
:
SAVE THESE INSTRUCTIONS
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before cleaning.
Disconnect power before servicing.
Replace all parts and panels before operating.
Use two or more people to move and install ice maker.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

OPERATING YOUR ICE MAKER

W11256912A

View the manual for the Whirlpool WUI75X15HB here, for free. This manual comes under the category ice-cream makers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Whirlpool WUI75X15HB or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
D
DougJanuary 12, 2024

Why is my wui75x15hw01 constantly running water overflowing the reservoir

K
Kathryn CragerJune 4, 2024

Ice is too thin

The Whirlpool WUI75X15HB is an ice cream maker that offers a convenient and efficient way to make homemade ice cream. Designed with user convenience in mind, this ice cream maker features a compact and sleek design that can easily fit into any kitchen space. With its user-friendly controls, the Whirlpool WUI75X15HB allows for quick and easy operation. Equipped with a powerful motor, this ice cream maker can efficiently churn and freeze ice cream within a short period of time. The precise temperature control ensures that the ice cream is perfectly frozen, resulting in a smooth and creamy texture. The Whirlpool WUI75X15HB also features a large capacity, allowing for the creation of generous amounts of ice cream in one go. Whether for a small gathering or a larger event, this ice cream maker can cater to your needs. With its high-quality construction, the Whirlpool WUI75X15HB ensures durability and longevity. Made with premium materials, it is built to withstand regular use without compromising on performance. Cleanup is a breeze with the Whirlpool WUI75X15HB, as it is designed with easy-to-clean components. The removable parts can be easily washed and dried, ready for the next round of ice cream making. Overall, the Whirlpool WUI75X15HB offers a reliable and efficient solution for making homemade ice cream. With its user-friendly controls, powerful motor, and durable construction, it is sure to delight ice cream enthusiasts.

General
BrandWhirlpool
ModelWUI75X15HB
Productice-cream maker
EAN883049483344
LanguageEnglish
FiletypeUser manual (PDF), Instructions / Assembly (PDF), Installation Guide (PDF), Warranty information (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WUI75X15HB below.

Why is the ice maker not producing ice?

The ice maker of the Whirlpool WUI75X15HB may not be producing ice due to several reasons. Here are the recommended solutions to troubleshoot this issue: 1. Check that the control is turned on. 2. Ensure that the water supply is properly connected and turned on. 3. Tighten the drain cap and clean the drain tube to prevent water leakage. 4. Verify that there are no kinks in the drain line. 5. If the accelerated ice production feature is turned on, it may reduce ice production. Consider turning it off. 6. Room temperatures above 90°F (32°C) can affect ice production. Lower the room temperature if possible. 7. Check for dirt or lint blocking the airflow through the condenser and clean if necessary. 8. Clean the ice maker if there is white scale buildup in the water or freezing system. 9. Ensure that the cutter grid is securely in place and its harness plug is connected. 10. Verify that the water filter is properly installed. 11. If the ice has an off taste, odor, or gray color, the water supply may need treatment or the ice maker requires cleaning. 12. Avoid storing any foods in the ice bin. 13. If the ice is thin, soft, or clumped together, consider treating the water supply or cleaning the ice maker. 14. If none of the above steps resolve the issue, it is recommended to contact a qualified technician for further assistance. Please note that these troubleshooting steps are provided as a general guide and may vary depending on the specific situation.

How can I reduce the noise coming from the ice maker?

To reduce the noise coming from the Whirlpool WUI75X15HB ice maker, you can follow these steps: 1. Check that the water supply is properly connected and turned on. 2. Ensure that the drain cap is tight and the water drain pan pump is securely attached to the water pan. 3. Verify that the ice maker is level. If not, adjust its position to ensure proper alignment. 4. Clean the drain tube to prevent any blockages. 5. Check for any ice buildup between the evaporator plate and the cutting grid. If present, level the ice maker and run a cleaning cycle. 6. If the ice maker is connected to a water supply with high pressure, you may hear a loud sound during water filling. Consider calling a licensed plumber to reduce the supply water pressure to the recommended level (50 psi). 7. Ensure that the ice maker is plugged into a grounded 3-prong outlet and that the ground prong is not removed. 8. Avoid using adapters or extension cords, as they can increase the risk of electrical shock. By following these steps, you should be able to reduce the noise coming from the ice maker of the Whirlpool WUI75X15HB.

What should I do if I experience an electrical shock while using the ice maker?

If you experience an electrical shock while using the Whirlpool WUI75X15HB ice maker, follow these steps: 1. Immediately unplug the ice maker from the power source to prevent further electrical shock. 2. Do not touch the ice maker or any electrical components while you are still in contact with the source of the shock. 3. If necessary, turn off the power supply to the area where the ice maker is located to ensure your safety. 4. Seek medical attention if you are injured or experiencing any symptoms related to the electrical shock. 5. Contact a qualified electrician to inspect and repair the ice maker to prevent future electrical hazards. It is important to prioritize your safety and seek professional assistance when dealing with electrical shocks. Do not attempt to repair or troubleshoot the ice maker yourself if you have experienced an electrical shock.

How do I start and stop ice production with the controls?

To start and stop ice production with the controls of the Whirlpool WUI75X15HB ice maker, follow these steps: 1. To start ice production, press the ON/OFF button. 2. To stop the ice maker operation, press the ON/OFF button again. Please note that pressing the ON/OFF button does not shut off power to the ice maker. Allow 24 hours for the first batch of ice to be produced and discard the first two batches. If you need a larger amount of ice in a shorter period, you can activate the FAST ICE mode. To do this, press the FAST ICE button while the ice maker is on. The indicator light will illuminate. Press the FAST ICE button again to turn off the FAST ICE feature. The indicator light will turn off. The FAST ICE mode will be on when you first turn on the product and will automatically turn off after 24 hours. To turn on the FAST ICE mode again, press the FAST ICE button. Remember to clean the ice maker periodically as recommended in the manual to maintain optimal performance.

How do I clean the ice maker and its components?

To clean the Whirlpool WUI75X15HB ice maker and its components, follow these steps: 1. Ensure that the ice maker is turned off and unplugged from the power source. 2. Remove any ice from the ice bin and discard it. 3. Remove the ice scoop and any other removable parts from the ice maker. 4. Prepare a mixture of mild detergent and warm water. 5. Use a soft cloth or sponge soaked in the detergent solution to clean the interior and exterior surfaces of the ice maker. 6. Pay special attention to areas prone to dirt or scale buildup, such as the water reservoir and the cutting grid. 7. Rinse the cloth or sponge with clean water and wipe away any soap residue. 8. Dry all surfaces thoroughly with a clean, dry cloth. 9. Reassemble any removable parts that were removed for cleaning. 10. Plug the ice maker back into the power source. 11. Allow the ice maker to run for a few cycles to ensure that any remaining cleaning solution is flushed out. 12. Dispose of the first few batches of ice produced after cleaning. 13. Regularly clean the ice maker according to the recommended cleaning schedule in the manual to maintain optimal performance. By following these steps, you can effectively clean the Whirlpool WUI75X15HB ice maker and its components.

Is the manual of the Whirlpool WUI75X15HB available in English?

Yes, the manual of the Whirlpool WUI75X15HB is available in English .

Is your question not listed? Ask your question here

No results