Whirlpool WTW5057LW manual

Whirlpool WTW5057LW
8.7 · 10
PDF manual
 · 21 pages
English
manualWhirlpool WTW5057LW
8

Connect Drain Hose

5. Attach drain hose to drain port

If applicable, remove the red plastic plug from the black drain
port on the back of the washer.
If clamp is not already in place on elbow end of drain hose,
slide it over end as shown. Squeeze clamp with pliers and
slide black elbow end of drain hose onto black drain port and
secure with clamp.
For a laundry tub or standpipe drain, go to step 6.
For a floor drain, remove the pre-installed drain hose form as
shown in step 7. You may need additional parts with separate
directions. See the “Alternate Parts” section.

6. Place drain hose in standpipe

IMPORTANT: 4.5" (114 mm) of drain hose should be inside
standpipe; do not force excess hose into standpipe or lay on
bottom of laundry tub. Drain hose form must be used.
Place hose into standpipe (shown in picture) or over side of
laundry tub.

7. Remove drain hose form (floor drain

installations only)

For floor drain installations, you will need to remove the drain
hose form from the end of the drain hose. You may need
additional parts with separate directions. See “Tools and
Parts.”
It is the responsibility of the installer to install and secure the
drain hose into the provided plumbing/drain in a manner that
will avoid the drain hose coming out of and leaking from the
plumbing/drain.

Connect Inlet Hoses

Washer must be connected to water faucets with new inlet hoses
with flat washers (not provided). Do not use old hoses.
NOTE: Both hoses must be attached and have water flowing to
inlet valves. If you are only connecting to a cold water faucet, you
must use a Y-adapter (not provided).

8. Connect inlet hoses to water faucets

IMPORTANT: Do not overtighten hose or use tape or
sealants on valve. Damage to the valves can result.
Attach hose to hot water faucet. Screw on coupling by hand
until it is seated on washer. Use adjustable pliers to tighten
couplings an additional two-thirds turn. Repeat this step with
second hose for cold water faucet.

View the manual for the Whirlpool WTW5057LW here, for free. This manual comes under the category washing machines and has been rated by 10 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5057LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 253
P
Pete AtkinsonJuly 12, 2023

Is it normal at first to have a grinding sound at the first soak cycle when the agitator moves? How to balance, the tub bounces around when water going out?

B
BobbyJuly 15, 2023

How do we use our warranty on these? This machine clicks and makes a sound and switches to done

B
Brad Markell July 16, 2023

How THE HELL am I supposed to add the bleach? Are you saying I can’t use soap and bleach together?

J
JudyJuly 30, 2023

After being away, I ran my washer. After it finished, I remembered I never turned the water on. Will that do something to the washer?

J
Jeff NeelyAugust 13, 2023

Washer seems to be stuck in cycle, it is full of clothes with water and stop. It will not start. Is there a reset? What can I do

K
KellyAugust 15, 2023

I just purchased the whirlpool 2 in 1 agitator. I started the washer on bulky cycle and came back a couple hours later and it was doing nothing with water sitting in the drum. It showed done on the screen and sensor was flashing. I tried doing drain and spin and that did not work. I have tried unplugging it and that did not work. What do I need to do to get the water out?

R
Rita SmithNovember 3, 2023

I normally use normal cycle but the clothes are still pretty wet at cycle end so I have to switch over to drain and spin cycle Is this normal for this machine?

O
Olliver LarsonJanuary 7, 2024

How does one operate it how do you fill the machine how do you set the machine on the size of load that you want to wash how do you set the water temperature?

G
Gary HileJanuary 12, 2024

We need to use an additive for a Laundry Sanitizer in the Rinse Cycle. How do we make that happen during the laundry cycle.

1 comment
G
Gary HileJanuary 12, 2024

Whirlpool states that a fabric softener Ball is the only way to get the product into the rinse cycle.

W
Wendy February 6, 2024

Sometimes I just want to rinse and spin only and I see that cycle on my machine so wondering if it had it and I’m missing it

The Whirlpool WTW5057LW is a washing machine that is manufactured by Whirlpool, a renowned company in the home appliance industry. It is designed to effectively clean and remove dirt from various types of laundry. The washing machine has a capacity of X pounds, allowing users to wash a decent amount of clothes in a single cycle. Equipped with a X-horsepower motor, the Whirlpool WTW5057LW provides sufficient power to agitate clothes and remove stubborn stains. It features X wash cycles, including delicate, normal, and heavy-duty, to cater to different washing needs. The machine also offers X water temperature settings, allowing users to customize the washing process according to their preferences and garment requirements. The Whirlpool WTW5057LW is designed to be user-friendly, with a control panel that is easy to navigate. It has a clear and bright display, which makes it convenient for users to select their desired settings. The washing machine also features a programmable timer, which enables users to delay the start of a washing cycle to fit their schedule. In terms of energy efficiency, the Whirlpool WTW5057LW has a X-star energy rating, ensuring that it consumes less electricity and water compared to traditional washing machines. This not only helps users save on utility bills but also contributes to reducing environmental impact. Overall, the Whirlpool WTW5057LW is a reliable and durable washing machine that offers a range of features to effectively clean clothes.

General
BrandWhirlpool
ModelWTW5057LW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5057LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is the washing machine not starting?

Make sure the power cord is securely plugged into a grounded outlet and try pressing the "Start" button again. Also, ensure that the lid is closed properly, as the machine will not start if the lid is open.

Why is the water not filling the machine?

Check that the water supply valves are fully open. Additionally, inspect the water inlet hoses for any kinks or clogs that might be blocking water flow. It's recommended to use a cold water supply for optimal performance.

How do I adjust the water level for different load sizes?

To adjust the water level, simply rotate the "Load Size" selector knob to the desired setting. Larger load sizes may require higher water levels, while smaller loads can be washed with lower water levels. Remember to distribute the clothes evenly in the drum.

Why is the washing machine not draining properly?

First, ensure that the drain hose is not kinked or blocked. If the drain hose is clear, check if the drain pump filter is clogged with lint or debris. Clean the filter if necessary. Additionally, verify that the drain hose is installed correctly at the appropriate height, as incorrect positioning may impact draining.

How do I resolve excessive vibration during the spin cycle?

Check if the washer is level by adjusting the feet underneath. Make sure all four feet are in firm contact with the floor. Uneven load distribution can also cause excessive vibration, so try redistributing clothes inside the drum. Finally, avoid overloading the machine, as this can disrupt balance and result in increased vibration.

Is the manual of the Whirlpool WTW5057LW available in English?

Yes, the manual of the Whirlpool WTW5057LW is available in English .

Is your question not listed? Ask your question here

No results