Whirlpool WTW5057LW manual

Whirlpool WTW5057LW
8.7 · 10
PDF manual
 · 21 pages
English
manualWhirlpool WTW5057LW
3

CHOOSING THE RIGHT

DETERGENT

Use only High Efficiency detergents. The package will be marked
“HE” or “High Efficiency.” Low-water washing creates excessive
sudsing with a non-HE detergent. Using non-HE detergent will
likely result in longer cycle times and reduced rinsing
performance. It may also result in component malfunction and,
over time, buildup of mold or mildew. HE detergents should be
low-sudsing and quick-dispersing to produce the right amount of
suds for the best performance. They should hold soil in
suspension so it is not redeposited onto clean clothes. Not all
detergents labeled as High Efficiency are identical in formulation
and their ability to reduce suds. For example, natural, organic, or
homemade HE detergents may generate a high level of suds.
Always follow the detergent manufacturer’s instructions to
determine the amount of detergent to use. Do not go over the Max
Line on the dispenser. See Quick Start Guide for more
information.

WASHER MAINTENANCE AND

CARE

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose
failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses:
Mark the date of replacement on the label with a permanent
marker.
Check that the old washers are not stuck on the washer inlet
valves.
Use new washers in the new inlet hoses to ensure a proper
seal.
NOTE: This washer may not include inlet hoses. See the
Installation Instructions for more information.

Washer Care

Recommendations to help keep your washer

clean and performing at its best

1. Always use High Efficiency (HE) detergents and follow the HE
detergent manufacturer’s instructions regarding the amount of
HE detergent to use. Never use more than the recommended
amount because that may increase the rate at which
detergent and soil residue accumulate inside your washer,
which in turn may result in undesirable odor.
2. Use warm and hot wash water settings sometimes (not
exclusively cold water washes), because they do a better job
of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer lid open between uses to help dry
out the washer and prevent the buildup of odor-causing
residue.

Cleaning your top-loading washer

Read these instructions completely before beginning the routine
cleaning processes recommended below. This Washer
Maintenance Procedure should be performed, at a minimum,
once per month or every 30 wash cycles, whichever occurs
sooner, to control the rate at which soils and detergent may
otherwise accumulate in your washer.

Cleaning the inside of the washer

To keep your washer odor-free, follow the usage instructions
provided above and use this recommended monthly cleaning
procedure:

Recommended cycle for cleaning the washer

Some models have a “Clean Washer” cycle that uses higher water
volumes in combination with affresh
®
Washer Cleaner or liquid
chlorine bleach to clean the inside of the washer.
If your model does not have a “Clean Washer” cycle, refer to the
online Cycle Guide for the optimal cycle for cleaning the inside of
the washer. Use this cycle with affresh
®
Washer Cleaner or liquid
chlorine bleach as described below.

Description of Clean Washer with affresh

®

cycle

operation:

1. This cycle will fill to a washer level high than in normal wash
cycles to provide rinsing than in normal wash cycles to provide
rinsing at a level above the water line for normal wash.
2. During this cycle, there will be some agitation and spinning to
increase the removal of soils.
After this cycle is complete, leave the lid open to allow for better
ventilation and drying of the washer interior.

Begin procedure

1. Affresh
®
washer cleaner cycle procedure (recommended
for best performance):
a. Open the washer lid and remove any clothing or items.
b. Place an affresh
®
Washer Cleaner tablet in the bottom of
the washer basket.
c. Do not place an affresh
®
Washer Cleaner tablet in the
detergent dispenser.
d. Do not add any detergent or other chemical to the washer
when following this procedure.
e. Close the washer lid.
f. Select the cycle recommended for cleaning the inside of
the washer.
g. Press the START button to start the cycle.
NOTE: For best results, do not interrupt cycle. If cycle must be
interrupted, press POWER/CANCEL. (For models with no
Power/Cancel button, press and hold START/PAUSE for three
seconds.) After the cycle has stopped, run a Rinse & Spin
cycle to rinse cleaner from washer.
2. Chlorine bleach procedure (alternative):
a. Open the washer lid and remove any clothing or items.
b. Add 1 cup (236 mL) of liquid chlorine bleach to the bleach
compartment.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage over
time.
c. Close the washer lid.
d. Do not add any detergent or other chemical to the washer
when following this procedure.
e. Select the cycle recommended for cleaning the inside of
the washer.
f. Press the START button to start the cycle.
NOTE: For best results, do not interrupt cycle. If cycle must be
interrupted, press POWER/CANCEL. (For models with no
Power/Cancel button, press and hold START/PAUSE for three
seconds.) After the cycle has stopped, run a Rinse & Spin
cycle to rinse cleaner from washer.

View the manual for the Whirlpool WTW5057LW here, for free. This manual comes under the category washing machines and has been rated by 10 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5057LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 253
D
Daphne SimmonsFebruary 21, 2023

I am constantly having to stop the machine to redistribute the load. What used to be a 30-minute wash has turned into a 3 or 4 hour ordeal. I know this is not normal and is quite frustrating. I've had the washer since October, 2022. Please help! I'm ready to return the washer!

S
SueFebruary 27, 2023

I have a whirlpool washer with removable agitator (model WTW5057LWG). When my washer load is not level, how do I pause and restart the washer after redistributing the load?

F
Fred MegillMarch 19, 2023

Trying to was a comforter. Do I have to push option button to activate the deep water feature? It didn't seem to put enough water in the tub to wash it, and the impeller just moved the water under the comforter.

C
Chantel R WarnerApril 10, 2023

I have a drain and spin setting on my washer and when I use it there are times the clothes come out wetter than they were originally. Why is that

M
Mitchell Dustin CordleMay 12, 2023

Is there a hard reset for a whirlpool 2 in 1 agitator removal? Our washer is less than a year old, and won't switch over from sense.

A
Amy FinneyJune 5, 2023

When I start my machine, it doesn’t fill or spin. It makes a click sound then try’s to drain and shuts off.

Y
Yvette SteffenJune 28, 2023

The washer will not start a cycle it automatically clicks and the done light - lights up. Can I reset the electronic board somehow?

M
Marina Oliszczak June 28, 2023

My WTW5057LW0 does not fill up with much water. I doesn't even cover my laundry. How can I fix that?

S
Steven RustJuly 10, 2023

Can I turn off the lock function in the middle of washing a load. So I could an item into the machine?

T
Traci KJuly 11, 2023

How can i just drain and spin without adding more rinse water? Bulky bedding items are always SO full of water when the load is done washing and i just need to spin and drain but that cycle always dies another rinse, which adds more water!

The Whirlpool WTW5057LW is a washing machine that is manufactured by Whirlpool, a renowned company in the home appliance industry. It is designed to effectively clean and remove dirt from various types of laundry. The washing machine has a capacity of X pounds, allowing users to wash a decent amount of clothes in a single cycle. Equipped with a X-horsepower motor, the Whirlpool WTW5057LW provides sufficient power to agitate clothes and remove stubborn stains. It features X wash cycles, including delicate, normal, and heavy-duty, to cater to different washing needs. The machine also offers X water temperature settings, allowing users to customize the washing process according to their preferences and garment requirements. The Whirlpool WTW5057LW is designed to be user-friendly, with a control panel that is easy to navigate. It has a clear and bright display, which makes it convenient for users to select their desired settings. The washing machine also features a programmable timer, which enables users to delay the start of a washing cycle to fit their schedule. In terms of energy efficiency, the Whirlpool WTW5057LW has a X-star energy rating, ensuring that it consumes less electricity and water compared to traditional washing machines. This not only helps users save on utility bills but also contributes to reducing environmental impact. Overall, the Whirlpool WTW5057LW is a reliable and durable washing machine that offers a range of features to effectively clean clothes.

General
BrandWhirlpool
ModelWTW5057LW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5057LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is the washing machine not starting?

Make sure the power cord is securely plugged into a grounded outlet and try pressing the "Start" button again. Also, ensure that the lid is closed properly, as the machine will not start if the lid is open.

Why is the water not filling the machine?

Check that the water supply valves are fully open. Additionally, inspect the water inlet hoses for any kinks or clogs that might be blocking water flow. It's recommended to use a cold water supply for optimal performance.

How do I adjust the water level for different load sizes?

To adjust the water level, simply rotate the "Load Size" selector knob to the desired setting. Larger load sizes may require higher water levels, while smaller loads can be washed with lower water levels. Remember to distribute the clothes evenly in the drum.

Why is the washing machine not draining properly?

First, ensure that the drain hose is not kinked or blocked. If the drain hose is clear, check if the drain pump filter is clogged with lint or debris. Clean the filter if necessary. Additionally, verify that the drain hose is installed correctly at the appropriate height, as incorrect positioning may impact draining.

How do I resolve excessive vibration during the spin cycle?

Check if the washer is level by adjusting the feet underneath. Make sure all four feet are in firm contact with the floor. Uneven load distribution can also cause excessive vibration, so try redistributing clothes inside the drum. Finally, avoid overloading the machine, as this can disrupt balance and result in increased vibration.

Is the manual of the Whirlpool WTW5057LW available in English?

Yes, the manual of the Whirlpool WTW5057LW is available in English .

Is your question not listed? Ask your question here

No results