Whirlpool WTW5057LW manual

Whirlpool WTW5057LW
8.7 · 10
PDF manual
 · 21 pages
English
manualWhirlpool WTW5057LW
3

CHOOSING THE RIGHT

DETERGENT

Use only High Efficiency detergents. The package will be marked
“HE” or “High Efficiency.” Low-water washing creates excessive
sudsing with a non-HE detergent. Using non-HE detergent will
likely result in longer cycle times and reduced rinsing
performance. It may also result in component malfunction and,
over time, buildup of mold or mildew. HE detergents should be
low-sudsing and quick-dispersing to produce the right amount of
suds for the best performance. They should hold soil in
suspension so it is not redeposited onto clean clothes. Not all
detergents labeled as High Efficiency are identical in formulation
and their ability to reduce suds. For example, natural, organic, or
homemade HE detergents may generate a high level of suds.
Always follow the detergent manufacturer’s instructions to
determine the amount of detergent to use. Do not go over the Max
Line on the dispenser. See Quick Start Guide for more
information.

WASHER MAINTENANCE AND

CARE

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose
failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses:
Mark the date of replacement on the label with a permanent
marker.
Check that the old washers are not stuck on the washer inlet
valves.
Use new washers in the new inlet hoses to ensure a proper
seal.
NOTE: This washer may not include inlet hoses. See the
Installation Instructions for more information.

Washer Care

Recommendations to help keep your washer

clean and performing at its best

1. Always use High Efficiency (HE) detergents and follow the HE
detergent manufacturer’s instructions regarding the amount of
HE detergent to use. Never use more than the recommended
amount because that may increase the rate at which
detergent and soil residue accumulate inside your washer,
which in turn may result in undesirable odor.
2. Use warm and hot wash water settings sometimes (not
exclusively cold water washes), because they do a better job
of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer lid open between uses to help dry
out the washer and prevent the buildup of odor-causing
residue.

Cleaning your top-loading washer

Read these instructions completely before beginning the routine
cleaning processes recommended below. This Washer
Maintenance Procedure should be performed, at a minimum,
once per month or every 30 wash cycles, whichever occurs
sooner, to control the rate at which soils and detergent may
otherwise accumulate in your washer.

Cleaning the inside of the washer

To keep your washer odor-free, follow the usage instructions
provided above and use this recommended monthly cleaning
procedure:

Recommended cycle for cleaning the washer

Some models have a “Clean Washer” cycle that uses higher water
volumes in combination with affresh
®
Washer Cleaner or liquid
chlorine bleach to clean the inside of the washer.
If your model does not have a “Clean Washer” cycle, refer to the
online Cycle Guide for the optimal cycle for cleaning the inside of
the washer. Use this cycle with affresh
®
Washer Cleaner or liquid
chlorine bleach as described below.

Description of Clean Washer with affresh

®

cycle

operation:

1. This cycle will fill to a washer level high than in normal wash
cycles to provide rinsing than in normal wash cycles to provide
rinsing at a level above the water line for normal wash.
2. During this cycle, there will be some agitation and spinning to
increase the removal of soils.
After this cycle is complete, leave the lid open to allow for better
ventilation and drying of the washer interior.

Begin procedure

1. Affresh
®
washer cleaner cycle procedure (recommended
for best performance):
a. Open the washer lid and remove any clothing or items.
b. Place an affresh
®
Washer Cleaner tablet in the bottom of
the washer basket.
c. Do not place an affresh
®
Washer Cleaner tablet in the
detergent dispenser.
d. Do not add any detergent or other chemical to the washer
when following this procedure.
e. Close the washer lid.
f. Select the cycle recommended for cleaning the inside of
the washer.
g. Press the START button to start the cycle.
NOTE: For best results, do not interrupt cycle. If cycle must be
interrupted, press POWER/CANCEL. (For models with no
Power/Cancel button, press and hold START/PAUSE for three
seconds.) After the cycle has stopped, run a Rinse & Spin
cycle to rinse cleaner from washer.
2. Chlorine bleach procedure (alternative):
a. Open the washer lid and remove any clothing or items.
b. Add 1 cup (236 mL) of liquid chlorine bleach to the bleach
compartment.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage over
time.
c. Close the washer lid.
d. Do not add any detergent or other chemical to the washer
when following this procedure.
e. Select the cycle recommended for cleaning the inside of
the washer.
f. Press the START button to start the cycle.
NOTE: For best results, do not interrupt cycle. If cycle must be
interrupted, press POWER/CANCEL. (For models with no
Power/Cancel button, press and hold START/PAUSE for three
seconds.) After the cycle has stopped, run a Rinse & Spin
cycle to rinse cleaner from washer.

View the manual for the Whirlpool WTW5057LW here, for free. This manual comes under the category washing machines and has been rated by 10 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5057LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 253
A
Amy MillerSeptember 30, 2023

Why won't my washer start running after lid is closed and power turned on. It no longer "senses" and won't begin to fill/start any cycle. Mod#WTW5057LW0 Ser:CB2001023 It is 17 months old.

Why won't my washer start running after lid is closed and power turned on. It no longer "senses" and won't begin to fill/star...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

If your Whirlpool WTW5057LW washing machine is not starting after closing the lid and turning on the power, it may be due to a detection issue. Here are the steps you can follow to troubleshoot the problem: 1. Make sure the lid is securely closed: Check if the lid is properly closed and latched. If it is not closed properly, the washer will not start. 2. Check the power supply: Ensure that the washing machine is properly connected to a power source and that the power is turned on. You can also try plugging the machine into a different outlet to rule out any power supply issues. 3. Check for error codes: Look for any error codes or indicators on the control panel. Error codes can provide valuable information about the specific issue with the washer. 4. Reset the machine: Try resetting the washing machine by unplugging it from the power source for a few minutes and then plugging it back in. This can sometimes resolve minor issues and restore the machine's functionality. If following these steps does not resolve the issue, it is recommended to seek further assistance.

This answer is automatically generated
K
Kenneth W.May 2, 2023

When I start my machine, it doesn’t fill or spin. It makes a click sound then try’s to drain and shuts off.

When I start my machine, it doesn’t fill or spin.  It makes a click sound then try’s to drain and shuts off.
zoom-in
View photo
5 comments
E
Emma of manua.lsDecember 21, 2023

The possible issue when the Whirlpool WTW5057LW washing machine does not fill or spin but makes a clicking sound, attempts to drain, and then shuts off could be a problem with the water inlet valve or the drain system. Here are the steps to troubleshoot the issue: 1. Check the water supply: Make sure that the water supply valves are fully open and that there is adequate water pressure. 2. Inspect the water inlet valve: The clicking sound could indicate a faulty water inlet valve. Check if the valve is clogged or malfunctioning. If necessary, replace the water inlet valve. 3. Check the drain system: Ensure that the drain hose is properly connected and not kinked or clogged. Verify that the drain hose is inserted into the standpipe or laundry tub at the correct height to prevent siphoning. If the drain system is not functioning properly, it can cause the machine to shut off. 4. Test the lid switch: The lid switch is a safety feature that prevents the washer from spinning when the lid is open. Make sure that the lid is securely closed and that the lid switch is functioning correctly. If the issue persists after following these steps, it is recommended to contact a professional technician for further assistance.

This answer is automatically generated
N
Nokuthula May 5, 2023

Same as above

S
Sid HoltSeptember 25, 2023

Mine dose the same

R
Renae WillbergMarch 24, 2023

I have a Whirlpool Washer Model WTW5057LW0. The cycle knob has no marker so I am unable to distinguish which cycle is being used. How can I discern which cycle I am using?

I have a Whirlpool Washer Model WTW5057LW0.  The cycle knob has no marker so I am unable to distinguish which cycle is being ...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

To determine which cycle you are using on the Whirlpool Washer Model WTW5057LW0, follow these steps: 1. Start the washer and choose the desired cycle. 2. Once the cycle has started, look at the display panel or control panel of the washer. 3. Look for any indicators or symbols that represent the selected cycle. 4. If the cycle knob does not have a specific marker, check the display panel or control panel to identify the current cycle. 5. The display panel or control panel should provide information about the current cycle, such as the cycle name or a corresponding symbol. Please note that the location and appearance of the cycle indicator may vary depending on the washer model. Consult the display panel or control panel for accurate information about the selected cycle.

This answer is automatically generated
D
Derek WilsonFebruary 8, 2023

I am having issues with my 1 year 4 month old Whirlpool WTW5057LW top load washer. I am unable to read the fault codes associated with the machine. I understand the first lights flashing is F and the 2nd set is E but not sure what number the lights mean. The first pic would be the first lights given. Then after that, it flashes done. I also have another code that flashes soak, done, and lid lock and the 2nd flash is soak.

I am having issues with my 1 year 4 month old Whirlpool WTW5057LW top load washer.  I am unable to read the fault codes assoc...
zoom-in
View photo
2 comments
E
Emma of manua.lsDecember 21, 2023

The Whirlpool WTW5057LW top load washer does not have specific fault codes indicated by flashing lights.

This answer is automatically generated
A
Ada KruegerApril 10, 2023

No water goes in after starting, tries to start but then flashes done

K
KristinJanuary 30, 2023

A pillowcase somehow got underneath the agitator floor. between it and the drum. Can the agitator floor be removed??

A pillowcase somehow got underneath the agitator floor. between it and the drum. Can the agitator floor be removed??
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

Yes, the agitator floor can be removed in the Whirlpool WTW5057LW washing machine. To remove the agitator floor, follow these steps: 1. Unplug the washer from the power source. 2. Open the washer lid. 3. Grasp the agitator floor firmly and lift it straight up. 4. The agitator floor should come off easily. 5. If there is a pillowcase or any other object stuck underneath the agitator floor, remove it carefully. 6. Place the agitator floor back onto the agitator shaft and press it down firmly until it locks into place. 7. Close the washer lid. 8. Plug the washer back into the power source.

This answer is automatically generated
S
Susie ChapmanSeptember 7, 2022

Where can I find trouble shooting info for WTW5057LW??? Washer stopped mid cycle . Won’t drain/. Sense /Done/Lid lock lights are flashing

6 comments
E
Emma of manua.lsOctober 25, 2023

You can find troubleshooting information for the Whirlpool WTW5057LW washing machine by visiting the Whirlpool website. Look for the support section and search for the specific model number. This will provide you with the necessary troubleshooting steps to address the issue you mentioned.

This answer is automatically generated
K
K MMay 26, 2024

@Susie Chapman honestly this washer sounds like a nightmare and no appliance should have this many issues. Im so angry i even bought mine now.

S
SteveMarch 2, 2024

@Emma Website is pretty much useless for this model. Just want to know how to access the water pump and cant find any info on that Older models show some info but no help whatsoever. Online chat is worthless also.

A
Anna MarinoNovember 27, 2022

Does this washer give a signal when it is finished?

This message has been automatically translated
1 comment
E
Emma of manua.lsOctober 24, 2023

Yes, the Whirlpool WTW5057LW washer does notify when finished.

This answer is automatically generated
D
DebbieJune 8, 2024

We do an extra rinse cycle, but need to add some vinegar to the 2nd rinse. How do I do that?

S
Sandra PetersonMay 23, 2024

How do I temporarily stop the washer from running to add an item and start it again where it left off in it's cycle?

The Whirlpool WTW5057LW is a washing machine that is manufactured by Whirlpool, a renowned company in the home appliance industry. It is designed to effectively clean and remove dirt from various types of laundry. The washing machine has a capacity of X pounds, allowing users to wash a decent amount of clothes in a single cycle. Equipped with a X-horsepower motor, the Whirlpool WTW5057LW provides sufficient power to agitate clothes and remove stubborn stains. It features X wash cycles, including delicate, normal, and heavy-duty, to cater to different washing needs. The machine also offers X water temperature settings, allowing users to customize the washing process according to their preferences and garment requirements. The Whirlpool WTW5057LW is designed to be user-friendly, with a control panel that is easy to navigate. It has a clear and bright display, which makes it convenient for users to select their desired settings. The washing machine also features a programmable timer, which enables users to delay the start of a washing cycle to fit their schedule. In terms of energy efficiency, the Whirlpool WTW5057LW has a X-star energy rating, ensuring that it consumes less electricity and water compared to traditional washing machines. This not only helps users save on utility bills but also contributes to reducing environmental impact. Overall, the Whirlpool WTW5057LW is a reliable and durable washing machine that offers a range of features to effectively clean clothes.

General
BrandWhirlpool
ModelWTW5057LW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5057LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is the washing machine not starting?

Make sure the power cord is securely plugged into a grounded outlet and try pressing the "Start" button again. Also, ensure that the lid is closed properly, as the machine will not start if the lid is open.

Why is the water not filling the machine?

Check that the water supply valves are fully open. Additionally, inspect the water inlet hoses for any kinks or clogs that might be blocking water flow. It's recommended to use a cold water supply for optimal performance.

How do I adjust the water level for different load sizes?

To adjust the water level, simply rotate the "Load Size" selector knob to the desired setting. Larger load sizes may require higher water levels, while smaller loads can be washed with lower water levels. Remember to distribute the clothes evenly in the drum.

Why is the washing machine not draining properly?

First, ensure that the drain hose is not kinked or blocked. If the drain hose is clear, check if the drain pump filter is clogged with lint or debris. Clean the filter if necessary. Additionally, verify that the drain hose is installed correctly at the appropriate height, as incorrect positioning may impact draining.

How do I resolve excessive vibration during the spin cycle?

Check if the washer is level by adjusting the feet underneath. Make sure all four feet are in firm contact with the floor. Uneven load distribution can also cause excessive vibration, so try redistributing clothes inside the drum. Finally, avoid overloading the machine, as this can disrupt balance and result in increased vibration.

Is the manual of the Whirlpool WTW5057LW available in English?

Yes, the manual of the Whirlpool WTW5057LW is available in English .

Is your question not listed? Ask your question here

No results