Whirlpool WTW5057LW manual

Whirlpool WTW5057LW
8.7 · 10
PDF manual
 · 21 pages
English
manualWhirlpool WTW5057LW
19

Raccordement des tuyaux

d’alimentation

La laveuse doit être raccordée aux robinets à l’aide de tuyaux
d’arrivée d’eau neufs dotés de rondelles plates (non compris). Ne
pas utiliser de tuyaux usagés.
REMARQUE: Les deux tuyaux doivent être fixés et l’eau doit
pénétrer dans les robinets d’arrivée d’eau. Si l’on effectue un
raccordement uniquement à un robinet d’eau froide, on doit
utiliser un adaptateur en Y (non fourni).

8. Connecter les tuyaux d’arrivée d’eau aux

robinets

IMPORTANT: Ne pas trop serrer le tuyau, utiliser du ruban ou
appliquer du calfeutrant sur le robinet. Cela pourrait
endommager le robinet.
Fixer le tuyau au robinet d’eau chaude. Visser le raccord à la
main pour qu’il repose sur la rondelle. Serrer les raccords de
deux tiers de tour supplémentaires à l’aide d’une pince.
Répéter cette étape avec le deuxième tuyau pour le robinet
d’eau froide.

9. Purger les canalisations d’eau

Faire couler l’eau par les tuyaux dans l’évier de buanderie, le
tuyau de rejet à l’égout ou le seau pendant quelques
secondes pour éviter toute obstruction. On doit laisser couler
l’eau jusqu’à ce qu’elle soit limpide.
Repérer quel tuyau est raccordé à l’eau chaude pour
permettre une fixation correcte des tuyaux à la laveuse.

10. Connecter les tuyaux d’arrivée d’eau à la

laveuse

IMPORTANT: Pour réduire les risques de défaillance d’un
tuyau, remplacer les tuyaux tous les 5 ans. Prendre en note
les dates d’installation ou de remplacement des tuyaux pour
référence future.
Ne pas serrer excessivement le tuyau, utiliser du ruban
adhésif ou un calfeutrant sur le robinet. Les robinets
risquent d’être endommagés.
Inspecter périodiquement les tuyaux et les remplacer en
cas de renflement, de déformation, de coupure, d’usure
ou de fuite.
Fixer le tuyau d’eau chaude au robinet d’arrivée d’eau
chaude rouge. Visser le raccord à la main jusqu’à ce qu’il soit
bien serré. Serrer les raccords de deux tiers de tour
supplémentaires à l’aide d’une pince. Répéter pour le robinet
d’eau froide.

11. Rechercher les fuites éventuelles

Ouvrir les robinets d’eau pour vérifier qu’il n’y a pas de fuite.
Une petite quantité d’eau peut entrer dans la laveuse Elle
s’évacuera plus tard.

View the manual for the Whirlpool WTW5057LW here, for free. This manual comes under the category washing machines and has been rated by 10 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5057LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 253
E
Eric May 26, 2023

Where do you add fabric softener for this unit

Where do you add fabric softener for this unit
zoom-in
View photo
D
Debra SharpJune 3, 2023

The sense button is flashing. Have followed all the instructions and nothing is happening, Only way water goes into the water is with the faucet button. How do I start this thing before I decide to return it. Have had three people read the instructions with no luck

B
BrigitJune 19, 2023

Repairs have been made a new lid lock switch but my washer it’s still flashing wash and done when I try to run it

B
Brandon MooreJuly 5, 2023

The sense light is flashing and will not start the water?

K
Karen WilliamsAugust 4, 2023

Wtw5075Lwo washer kicks off when I start liad

Wtw5075Lwo washer kicks off when I start liad
zoom-in
View photo
J
JudySeptember 19, 2023

How do I get a manual

The Whirlpool WTW5057LW is a washing machine that is manufactured by Whirlpool, a renowned company in the home appliance industry. It is designed to effectively clean and remove dirt from various types of laundry. The washing machine has a capacity of X pounds, allowing users to wash a decent amount of clothes in a single cycle. Equipped with a X-horsepower motor, the Whirlpool WTW5057LW provides sufficient power to agitate clothes and remove stubborn stains. It features X wash cycles, including delicate, normal, and heavy-duty, to cater to different washing needs. The machine also offers X water temperature settings, allowing users to customize the washing process according to their preferences and garment requirements. The Whirlpool WTW5057LW is designed to be user-friendly, with a control panel that is easy to navigate. It has a clear and bright display, which makes it convenient for users to select their desired settings. The washing machine also features a programmable timer, which enables users to delay the start of a washing cycle to fit their schedule. In terms of energy efficiency, the Whirlpool WTW5057LW has a X-star energy rating, ensuring that it consumes less electricity and water compared to traditional washing machines. This not only helps users save on utility bills but also contributes to reducing environmental impact. Overall, the Whirlpool WTW5057LW is a reliable and durable washing machine that offers a range of features to effectively clean clothes.

General
BrandWhirlpool
ModelWTW5057LW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5057LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is the washing machine not starting?

Make sure the power cord is securely plugged into a grounded outlet and try pressing the "Start" button again. Also, ensure that the lid is closed properly, as the machine will not start if the lid is open.

Why is the water not filling the machine?

Check that the water supply valves are fully open. Additionally, inspect the water inlet hoses for any kinks or clogs that might be blocking water flow. It's recommended to use a cold water supply for optimal performance.

How do I adjust the water level for different load sizes?

To adjust the water level, simply rotate the "Load Size" selector knob to the desired setting. Larger load sizes may require higher water levels, while smaller loads can be washed with lower water levels. Remember to distribute the clothes evenly in the drum.

Why is the washing machine not draining properly?

First, ensure that the drain hose is not kinked or blocked. If the drain hose is clear, check if the drain pump filter is clogged with lint or debris. Clean the filter if necessary. Additionally, verify that the drain hose is installed correctly at the appropriate height, as incorrect positioning may impact draining.

How do I resolve excessive vibration during the spin cycle?

Check if the washer is level by adjusting the feet underneath. Make sure all four feet are in firm contact with the floor. Uneven load distribution can also cause excessive vibration, so try redistributing clothes inside the drum. Finally, avoid overloading the machine, as this can disrupt balance and result in increased vibration.

Is the manual of the Whirlpool WTW5057LW available in English?

Yes, the manual of the Whirlpool WTW5057LW is available in English .

Is your question not listed? Ask your question here

No results