Whirlpool WTW5057LW manual

Whirlpool WTW5057LW
8.7 · 10
PDF manual
 · 21 pages
English
manualWhirlpool WTW5057LW
17
INSTRUCTIONS DE LIAISON À LA TERRE
Appareils à cordon mis à la terre:
Cet appareil doit être mis à la terre. En cas de mauvais
fonctionnement ou de bris de l’appareil, la mise à la terre
réduira les risques de choc électrique en offrant un parcours
de moindre résistance au courant électrique. Cet appareil est
pourvu d’un cordon à conducteur de terre et d’une fiche de
miseà la terre. Brancher la fiche dans une prise installée
adéquatement et mise à terre conformément à tous les codes
et règlements locaux.
AVERTISSEMENT: Une mauvaise connexion du
conducteur de terre peut présenter des risques de choc
électrique. Consulter un électricien ou un technicien qualifiés
si vous n’êtes pas certain que appareil soit mis à terre
adéquatement. Ne pas modifier la fiche de l’appareil: Si elle
ne pénètre pas bien dans la prise, faire installer une prise
adéquate par un électricien qualifié.
Appareils raccordés à demeure:
Cet appareil doit être relié à une canalisation électrique
métallique fixe ou la dérivation doit comporter un conducteur
de terre connecté à la borne ou au fil de terre de l’appareil.
CONSERVER CES INSTRUCTIONS

INSTALLATION

Déballage

AVERTISSEMENT

Risque du poids excessif
Utiliser deux personnes ou plus pour déplacer et installer
ou désinstaller l’appareil.
Le non-respect de cette instruction peut causer une
blessure au dos ou d'autre blessure.
Avant de commencer : Retirer le matériel d’expédition.
Il est nécessaire de retirer tout le matériel d’expédition pour un
fonctionnement correct et pour éviter que la laveuse ne fasse trop
de bruit.
1. Déplacer la laveuse
Déplacer la laveuse à moins de 4 pies (1,2 m) de son
emplacement final, elle doit être en position complètement
verticale.
REMARQUE : Pour éviter d’endommager le plancher,
installer la laveuse sur un carton avant de la déplacer.
Assurer que le couvercle et retenu en place avec le ruban
adhésif.
2. Enlever la base d’expédition
IMPORTANT : Le retrait de la base d’expédition en
polystyrène est nécessaire au bon fonctionnement de
l’appareil. Si la laveuse comprend une plaque
d’insonorisation, consulter les instructions fournies avec la
plaque d'insonorisation pour l'installer maintenant.
Afin d’éviter d’endommager le plancher, placer les supports
en carton du carton d’expédition sur le plancher, derrière la
laveuse. Incliner la laveuse vers l’arrière et la placer sur les
supports en carton. Retirer la base d’expédition (certains
modèles demandent que la base d’expédition soit tournée de
90° vers la droite avant d’être enlevée). Redresser la laveuse
en position verticale.
3. Retirer les matériaux d’emballage de l’intérieur
de la laveuse
Retirer le ruban adhésif du couvercle de la laveuse, ouvrir le
couvercle et retirer les matériaux d’emballage de la cuve de
la laveuse. Vérifier que toutes les pièces ont été enlevées de
l’intérieur de la laveuse.
REMARQUE : Conserver les matériaux d’emballage de
l’intérieur de la laveuse au cas il faudrait déplacer la
laveuse ultérieurement.

View the manual for the Whirlpool WTW5057LW here, for free. This manual comes under the category washing machines and has been rated by 10 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5057LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 253
D
Daphne SimmonsFebruary 21, 2023

I am constantly having to stop the machine to redistribute the load. What used to be a 30-minute wash has turned into a 3 or 4 hour ordeal. I know this is not normal and is quite frustrating. I've had the washer since October, 2022. Please help! I'm ready to return the washer!

S
SueFebruary 27, 2023

I have a whirlpool washer with removable agitator (model WTW5057LWG). When my washer load is not level, how do I pause and restart the washer after redistributing the load?

F
Fred MegillMarch 19, 2023

Trying to was a comforter. Do I have to push option button to activate the deep water feature? It didn't seem to put enough water in the tub to wash it, and the impeller just moved the water under the comforter.

C
Chantel R WarnerApril 10, 2023

I have a drain and spin setting on my washer and when I use it there are times the clothes come out wetter than they were originally. Why is that

M
Mitchell Dustin CordleMay 12, 2023

Is there a hard reset for a whirlpool 2 in 1 agitator removal? Our washer is less than a year old, and won't switch over from sense.

A
Amy FinneyJune 5, 2023

When I start my machine, it doesn’t fill or spin. It makes a click sound then try’s to drain and shuts off.

Y
Yvette SteffenJune 28, 2023

The washer will not start a cycle it automatically clicks and the done light - lights up. Can I reset the electronic board somehow?

M
Marina Oliszczak June 28, 2023

My WTW5057LW0 does not fill up with much water. I doesn't even cover my laundry. How can I fix that?

S
Steven RustJuly 10, 2023

Can I turn off the lock function in the middle of washing a load. So I could an item into the machine?

T
Traci KJuly 11, 2023

How can i just drain and spin without adding more rinse water? Bulky bedding items are always SO full of water when the load is done washing and i just need to spin and drain but that cycle always dies another rinse, which adds more water!

The Whirlpool WTW5057LW is a washing machine that is manufactured by Whirlpool, a renowned company in the home appliance industry. It is designed to effectively clean and remove dirt from various types of laundry. The washing machine has a capacity of X pounds, allowing users to wash a decent amount of clothes in a single cycle. Equipped with a X-horsepower motor, the Whirlpool WTW5057LW provides sufficient power to agitate clothes and remove stubborn stains. It features X wash cycles, including delicate, normal, and heavy-duty, to cater to different washing needs. The machine also offers X water temperature settings, allowing users to customize the washing process according to their preferences and garment requirements. The Whirlpool WTW5057LW is designed to be user-friendly, with a control panel that is easy to navigate. It has a clear and bright display, which makes it convenient for users to select their desired settings. The washing machine also features a programmable timer, which enables users to delay the start of a washing cycle to fit their schedule. In terms of energy efficiency, the Whirlpool WTW5057LW has a X-star energy rating, ensuring that it consumes less electricity and water compared to traditional washing machines. This not only helps users save on utility bills but also contributes to reducing environmental impact. Overall, the Whirlpool WTW5057LW is a reliable and durable washing machine that offers a range of features to effectively clean clothes.

General
BrandWhirlpool
ModelWTW5057LW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5057LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is the washing machine not starting?

Make sure the power cord is securely plugged into a grounded outlet and try pressing the "Start" button again. Also, ensure that the lid is closed properly, as the machine will not start if the lid is open.

Why is the water not filling the machine?

Check that the water supply valves are fully open. Additionally, inspect the water inlet hoses for any kinks or clogs that might be blocking water flow. It's recommended to use a cold water supply for optimal performance.

How do I adjust the water level for different load sizes?

To adjust the water level, simply rotate the "Load Size" selector knob to the desired setting. Larger load sizes may require higher water levels, while smaller loads can be washed with lower water levels. Remember to distribute the clothes evenly in the drum.

Why is the washing machine not draining properly?

First, ensure that the drain hose is not kinked or blocked. If the drain hose is clear, check if the drain pump filter is clogged with lint or debris. Clean the filter if necessary. Additionally, verify that the drain hose is installed correctly at the appropriate height, as incorrect positioning may impact draining.

How do I resolve excessive vibration during the spin cycle?

Check if the washer is level by adjusting the feet underneath. Make sure all four feet are in firm contact with the floor. Uneven load distribution can also cause excessive vibration, so try redistributing clothes inside the drum. Finally, avoid overloading the machine, as this can disrupt balance and result in increased vibration.

Is the manual of the Whirlpool WTW5057LW available in English?

Yes, the manual of the Whirlpool WTW5057LW is available in English .

Is your question not listed? Ask your question here

No results