Whirlpool WTW5057LW manual

Whirlpool WTW5057LW
8.7 · 10
PDF manual
 · 21 pages
English
manualWhirlpool WTW5057LW
STEP 1. ADD
HE DETERGENT
Designed to use only HE
(High Efficiency)detergents.
NOTE: See ADDING
LAUNDRY PRODUCTS
(below) for more information
on adding HE detergent,
fabric softener, and/or
bleach.
STEP 2. LOAD CLOTHES
For best results, load garments in loose
heaps evenly around the basket wall.
STEP 3. PRESS POWER
TO TURN ON THE
WASHER
STEP 4. SELECT THE DESIRED
CYCLE FOR YOUR LOAD*
STEP 5. ADJUST CYCLE
SETTINGS, IF DESIRED
STEP 6. SELECT ADDITIONAL
OPTIONS*
STEP 7. PRESS AND HOLD START/PAUSE TO BEGIN CYCLE
NOTE: Start button must be held
for 1 second to start cycle. Once the
status lights are illuminated, release
the start button.
*Not all cycles, settings or options are available with all models.

QUICK START GUIDE

WHIRLPOOL

®

TOP LOADING WASHING MACHINE

OPERATING INSTRUCTIONS

Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance’s Owners Manual, before operating this appliance.
W11428540D
*Appearance may vary depending on model.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

For information on any of the following items, a full cycle guide, warranty, detailed product dimensions, or for complete instructions for use and installation,
please visit www.whirlpool.com/owners, or in Canada www.whirlpool.ca/owners. This may save you the cost of a service call.
Register Product Schedule Service How To’s & FAQ Manuals &
Downloads
Add Service Plan Parts Accessories
To speak with a customer service representative or if you have additional questions, call us toll free at
1-866-698-2538 or in Canada call 1-800-807-6777.
You can write with any questions or concerns at:
Whirlpool Brand Appliances
Customer eXperience Center
533 Benson Road
Benton Harbor, MI 49022-2692
Whirlpool Brand Appliances
Customer eXperience Center
Unit 200-6750 Century Ave
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Model & Serial
Number Tag
location

CONTROL PANEL AND FEATURES

1
3
2
4
ADDING LAUNDRY PRODUCTS
IMPORTANT: Using non-HE detergent will likely result in longer cycle
times and reduced rinsing performance. It may also result in component
malfunction and, over time, buildup of mold or mildew. HE detergents
should be low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance.
ADDING HE DETERGENT TO BASKET
Add a measured amount of
HE detergent or single-dose
laundry packets into the basket.
If using oxi-type boosters,
color-safe bleach, or fabric
softener crystals, add to the
bottom of the washer basket
before adding clothes.
NOTE: Follow the manufacturer’s instructions to determine the amount of
laundry products to use.
ADDING LIQUID CHLORINE
BLEACH
Do not overfill, dilute, or use more
than 1 cup (236 mL). Do not use
color-safe bleach or oxi products
in the same cycle with liquid
chlorine bleach.
ADDING LIQUID FABRIC SOFTENER
If you desire to use liquid fabric
softener with this washer, Whirlpool
suggests using the Downy Ball
®
dispenser. Pour a measured amount of
liquid fabric softener into the Downy
Ball
®
dispenser, pull the ring tightly
to seal it, and place on top of load.
Follow manufacturer’s directions for
correct amount of fabric softener
based on your load size. Then use the
Rinse Options button to select Fabric Softener. The Downy Ball
®
dispenser
will automatically release the fabric softener at the correct time in the cycle.
For questions on using the Downy Ball
®
dispenser visit
www.downy.com
.
ADDING LIQUID FABRIC SOFTENER MANUALLY
Select the Fabric Softener option on the control panel before starting a cycle.
During the final rinse, wait until the washer has completed filling, press the
Start/Pause button to pause the washer. Lift the lid and add the recommended
amount of liquid fabric softener. Close the lid, press and hold the Start/Pause
button to resume the cycle.

MORE WATER WHEN YOU WANT IT

AUTO SENSING AND DEEP WATE R
The washer will adjust the water level to
the optimal amount for a High Efficiency
wash of the detected load size.
Press Deep Water to automatically add
more water to your wash cycle.
It is recommended to use BULKY
ITEMS cycle with Deep Water option
for loads where maximum water level is
desired.
Expect longer cycle times due to
extended fill duration when using the
Deep Water option.

CLEANING WITH LESS WATER

The washer has been designed and
optimized to provide a thorough cleaning
using less water to conserve energy and
resources.
As the washer dampens and moves the
load, the level of the items will settle in the
basket. This is normal, and does not indicate
that more items should be added.
IMPORTANT: You will not see a full basket
of water as with older, less efficient washing
machines. It is normal for some of the load
to be above the water line.
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.
A cycle guide for your washer can be
found online at www.whirlpool.com
.
The document will help identify which
cycle to choose for various load types
as well as the default cycle options.
For example we recommend using
the NORMAL cycle with Warm water
for cottons, linens and mixed-garment
loads.

CHOOSING THE RIGHT CYCLE PRETREATING BEFORE A WASH CYCLE

Press the Faucet button once to
turn on and press again to turn off.
Faucet will automatically shut off
after 10 minutes or when max
water level is reached.
Water will automatically drain
if water level becomes too
high. Water will also drain after
10minutes if the lid is left open or
3 hours if the lid is left closed.

2IN1 REMOVABLE AGITATOR

Rotate
Counter-Clockwise
Pull Up
Agitator Mode
Squeeze Handle
Impeller Mode
Keep it in (Agitator mode) when you want increased mechanical action to remove and rinse away loose soils. You can use this mode anytime but it’s especially suited for
everyday mixed loads.
Take it out (Impeller mode) when you need added space and/or a thorough, gentle clean. You can use this mode anytime but it’s especially suited for bulky items such as
bedding and delicate items such as undergarments.
USING THE REMOVABLE AGITATOR
Squeeze handle, rotate counter-clockwise, and pull up to remove.
Push down and rotate clockwise to re-install. The agitator should lock into place.
1
POWER
Press to turn on/off or to stop/cancel a cycle.
2
CYCLE KNOB
Turn knob to select desired cycle.
3
START/PAUSE
Press and hold the Start/Pause button for 1 second until all status lights are
illuminated, then release to start cycle. Press during a cycle to pause cycle
and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
4
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMP
Press to modify the cycle’s available temperatures (Tap Cold, Cold, Cool,
Warm, or Hot).
NOTE: Pressing Temp will toggle through available temperature
options. When no lights in the temperature column are illuminated the
selected temperature is Tap Cold.
RINSE OPTIONS
Press to modify the cycle’s available rinse options. Press once for Fabric
Softener, twice for Extra Rinse and three times to activate both.
FABRIC SOFTENER
Select this option to let the machine know when you have added liquid
fabric softener.
EXTRA RINSE
Select this option to add a second rinse.
OPTIONS
Press to add or remove options for each cycle. Press once to add a
30 min PreSoak, twice to activate Deep Water and three times for both.
DEEP WATER
Use this option to automatically add more water to your wash cycle.
You can also use this option to reduce the likelihood of white
residue on dark clothing.
30 MIN PRESOAK
Touch to add a 30 minutes presoak period to help loosen tough
stains. The washer will fill, pause to soak, and then begin the
selected cycle.
FAUCET
Press to access an instant water stream. Use this feature to pretreat
clothes and other items right in the washer. You can also use this feature
to manually add water to the machine as desired.
NOTE: The washer will drain at the beginning of the cycle if a large
volume of water is detected to ensure the machine can correctly
sense the load size.
WARNING: Do not wash water-resistant or water repellant-type clothing.
Failure to closely follow these instructions may result in an abnormal
vibrating and out-of-balance condition that could result in physical injury,
property damage, and/or appliance damage.
NOTE: If the washer detects an out-of-balance condition it may pause
and attempt to correct the situation. During this time the Sense and Wash
status indicators will both briefly illuminate.

View the manual for the Whirlpool WTW5057LW here, for free. This manual comes under the category washing machines and has been rated by 10 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5057LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 253
K
Kenneth W.May 2, 2023

When I start my machine, it doesn’t fill or spin. It makes a click sound then try’s to drain and shuts off.

When I start my machine, it doesn’t fill or spin.  It makes a click sound then try’s to drain and shuts off.
zoom-in
View photo
5 comments
E
Emma of manua.lsDecember 21, 2023

The possible issue when the Whirlpool WTW5057LW washing machine does not fill or spin but makes a clicking sound, attempts to drain, and then shuts off could be a problem with the water inlet valve or the drain system. Here are the steps to troubleshoot the issue: 1. Check the water supply: Make sure that the water supply valves are fully open and that there is adequate water pressure. 2. Inspect the water inlet valve: The clicking sound could indicate a faulty water inlet valve. Check if the valve is clogged or malfunctioning. If necessary, replace the water inlet valve. 3. Check the drain system: Ensure that the drain hose is properly connected and not kinked or clogged. Verify that the drain hose is inserted into the standpipe or laundry tub at the correct height to prevent siphoning. If the drain system is not functioning properly, it can cause the machine to shut off. 4. Test the lid switch: The lid switch is a safety feature that prevents the washer from spinning when the lid is open. Make sure that the lid is securely closed and that the lid switch is functioning correctly. If the issue persists after following these steps, it is recommended to contact a professional technician for further assistance.

This answer is automatically generated
N
Nokuthula May 5, 2023

Same as above

S
Sid HoltSeptember 25, 2023

Mine dose the same

S
Susie ChapmanSeptember 7, 2022

Where can I find trouble shooting info for WTW5057LW??? Washer stopped mid cycle . Won’t drain/. Sense /Done/Lid lock lights are flashing

6 comments
E
Emma of manua.lsOctober 25, 2023

You can find troubleshooting information for the Whirlpool WTW5057LW washing machine by visiting the Whirlpool website. Look for the support section and search for the specific model number. This will provide you with the necessary troubleshooting steps to address the issue you mentioned.

This answer is automatically generated
K
K MMay 26, 2024

@Susie Chapman honestly this washer sounds like a nightmare and no appliance should have this many issues. Im so angry i even bought mine now.

S
SteveMarch 2, 2024

@Emma Website is pretty much useless for this model. Just want to know how to access the water pump and cant find any info on that Older models show some info but no help whatsoever. Online chat is worthless also.

K
Kaitlyn February 5, 2024

I’ve just turned my washer on for the first time, and it’s on the soak light, but no water has came in. It’s just spinning ever so often without and water. How do I get the water to come out?

M
Muriel GrenierNovember 15, 2023

When I start my machine, it doesn’t fill or spin. It makes a click sound then try’s to drain and shuts off.

When I start my machine, it doesn’t fill or spin. It makes a click sound then try’s to drain and shuts off.
zoom-in
View photo
C
CarrieMay 11, 2023

I know I was doing a load of laundry and I ended up adding some thing a few minutes into the cycle. Then I closed it and restarted and it never started so I unplugged it hoping to reset it now when I push the button it makes noises but it is not agitating and the water is just stuck in the washer. How can I make this drain and reset it? 512-484-1768

I know I was doing a load of laundry and I ended up adding some thing a few minutes into the cycle. Then I closed it and rest...
zoom-in
View photo
M
Mary Lee JohnsMay 12, 2024

Since my Whirlpool WTW5057LW Top Loading Washing Machine doesn't have any way to indicate loadsize, how do I know how much detergent to add???!

A
Amber haleMay 7, 2024

My washer said code f6e1. I unplugged it, and plugged it back up, now it won't even turn on. I liked up how to get into the settings and i did a factory reset on it, now it won't even turn on or anything. If it's the control board that's bad, what is the model # that it takes?

1 comment
A
Amber haleMay 7, 2024

@Amber hale it is the top load washer with the glass lid. Im not sure what model # my washer is.

W
Willier RobinsonMay 4, 2024

All the lights are on to start the cycle and the sensing fill light are blinking but not doing nothing the light just blinking on and off.

All the lights are on to start the cycle and the sensing fill light are blinking but not doing nothing the light just blinkin...
zoom-in
View photo
M
Michelle May 20, 2024

Why is my twin comforter not in the water or agitating? Any way to add extra water

R
Rheann April 25, 2024

My washer won’t spin out on any cycle except the drain and spin only have had 2days now

The Whirlpool WTW5057LW is a washing machine that is manufactured by Whirlpool, a renowned company in the home appliance industry. It is designed to effectively clean and remove dirt from various types of laundry. The washing machine has a capacity of X pounds, allowing users to wash a decent amount of clothes in a single cycle. Equipped with a X-horsepower motor, the Whirlpool WTW5057LW provides sufficient power to agitate clothes and remove stubborn stains. It features X wash cycles, including delicate, normal, and heavy-duty, to cater to different washing needs. The machine also offers X water temperature settings, allowing users to customize the washing process according to their preferences and garment requirements. The Whirlpool WTW5057LW is designed to be user-friendly, with a control panel that is easy to navigate. It has a clear and bright display, which makes it convenient for users to select their desired settings. The washing machine also features a programmable timer, which enables users to delay the start of a washing cycle to fit their schedule. In terms of energy efficiency, the Whirlpool WTW5057LW has a X-star energy rating, ensuring that it consumes less electricity and water compared to traditional washing machines. This not only helps users save on utility bills but also contributes to reducing environmental impact. Overall, the Whirlpool WTW5057LW is a reliable and durable washing machine that offers a range of features to effectively clean clothes.

General
BrandWhirlpool
ModelWTW5057LW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5057LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is the washing machine not starting?

Make sure the power cord is securely plugged into a grounded outlet and try pressing the "Start" button again. Also, ensure that the lid is closed properly, as the machine will not start if the lid is open.

Why is the water not filling the machine?

Check that the water supply valves are fully open. Additionally, inspect the water inlet hoses for any kinks or clogs that might be blocking water flow. It's recommended to use a cold water supply for optimal performance.

How do I adjust the water level for different load sizes?

To adjust the water level, simply rotate the "Load Size" selector knob to the desired setting. Larger load sizes may require higher water levels, while smaller loads can be washed with lower water levels. Remember to distribute the clothes evenly in the drum.

Why is the washing machine not draining properly?

First, ensure that the drain hose is not kinked or blocked. If the drain hose is clear, check if the drain pump filter is clogged with lint or debris. Clean the filter if necessary. Additionally, verify that the drain hose is installed correctly at the appropriate height, as incorrect positioning may impact draining.

How do I resolve excessive vibration during the spin cycle?

Check if the washer is level by adjusting the feet underneath. Make sure all four feet are in firm contact with the floor. Uneven load distribution can also cause excessive vibration, so try redistributing clothes inside the drum. Finally, avoid overloading the machine, as this can disrupt balance and result in increased vibration.

Is the manual of the Whirlpool WTW5057LW available in English?

Yes, the manual of the Whirlpool WTW5057LW is available in English .

Is your question not listed? Ask your question here

No results