View the manual for the Whirlpool WTW5015LW here, for free. This manual comes under the category washing machines and has been rated by 2 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5015LW or do you need help? Ask your question here
The Whirlpool WTW5015LW washing machine is a standard top-loading unit that measures 27.5 x 26 x 42 inches and has a total capacity of 3.5 cubic feet. It comes equipped with 9 different washing cycles, including a deep-water wash cycle that allows users to customize the amount of water used for each load. The machine also features a heavy-duty agitator, which helps to remove tough stains and dirt from clothing and linens. This machine uses an impeller-type washing system, which is designed to be gentler on fabrics and more efficient at getting clothes clean. The unit includes a variety of different temperature settings, including hot, warm, and cold, allowing users to customize the wash to their specific needs. The Whirlpool WTW5015LW also features a number of other useful features, including a delay start option, which lets users program the machine to start washing at a later time. Additionally, this machine features a clean washer cycle, which helps to remove any built-up residue or odors that may be present inside the unit. Overall, the Whirlpool WTW5015LW is a reliable and efficient washing machine that offers a variety of useful features for users looking to get their laundry done quickly and efficiently.
| Brand | Whirlpool |
| Model | WTW5015LW |
| Product | washing machine |
| EAN | 883049604725 |
| Language | English |
| Filetype | User manual (PDF), Energy label (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5015LW below.
The washing label of your garment shows the recommended washing temperature.
It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.
Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.
Check if the power cord is properly plugged into the electrical outlet and ensure there is power supply. Additionally, ensure the lid is closed properly as some models may not start if the lid is not securely latched.
Make sure the water supply faucets are fully turned on. Inspect the water hose connections at the back of the machine to ensure they are securely attached. Also, verify that the water inlet valve screens are not clogged.
Check if the drain hose is correctly installed, ensuring it is not kinked, twisted, or clogged. Ensure that the pump filter is clean and free from debris. Also, verify that the drain hose is not inserted too far into the standpipe, as this can cause siphoning.
Ensure the load is properly balanced inside the drum. Large and heavy items may cause an imbalance, resulting in the machine not spinning. Additionally, check if the lid is closed tightly, as some models have a safety feature that stops spinning if the lid is not secure.
Confirm that you are using the recommended amount of detergent according to the load size and soil level. Make sure the selected wash cycle is appropriate for the type of garments you are washing. Consider sorting the laundry by fabric type and adjust the water temperature setting accordingly.
Yes, the manual of the Whirlpool WTW5015LW is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Whirlpool and is the answer not in the manual?
Question and answer
Number of questions: 46How do operate the washer? I can't seem to get to the wash. cycle
2 comments
To use the Whirlpool WTW5015LW washing machine and access the wash cycle, follow these steps: 1. Cleaning the dispensers: - For dispensers that cannot be removed, wipe them with an affresh® Machine Cleaning Wipe or a damp cloth and then dry with a towel. - For removable dispensers, take out the drawer (if applicable) and clean it with an affresh® Machine Cleaning Wipe or a damp cloth before or after running the Clean Washer cycle. 2. Cleaning the outside of the washer: - Use an affresh® Machine Cleaning Wipe, a soft damp cloth, or a sponge to wipe away any spills. - Avoid using abrasive products to prevent damaging the washer's finish. 3. Operating the washer: - Plug the washer into a grounded 3-prong outlet. - Do not remove the ground prong or use an adapter or extension cord. - Flush water pipes and hoses before using the washer again. - Reconnect water inlet hoses and turn on both water faucets. - Select the desired wash cycle according to the online Cycle Guide for your specific model. - Use only HE (High Efficiency) detergent and follow the manufacturer's recommended amount for a medium-size load.
This answer is automatically generatedDid you ever figure it out? I have the same problem.
Is there a reset button ? I even tried to run the clean machine and ask it does is click
The model has a d on the end. I can’t get the washer to start. It’s filled with water
Why do my dark clothes have a white residue on them? I don't add too much detergent. It happens with liquid and the pods.
How can I keep the water filling up with the lid open? I like to add my detergent and add water to get soapy before I adding the clothes. With the lid lock option on, everytime I open the lid water drains out.
No instructions how to start the washer,I push the button to turn it on,then push and hold the start button until my thumb hurts and nothing happens.
2 comments
Did you ever figure it out?I have the same problem.
same
Why does it take so long to wash a load? I'm a single person who only has small loads. I put it on Sense. It takes at least an hour to complete. How is this high efficiency?
The following lights are flaahing simultaneously Sense and Lid then Soak and Wash. What needs to be done to fix this problem?
If you need to open the door of the washer after it’s started and it has locked how do you do that?
My washer machine is new one and the rinse switch is not working, what can I do, do I need to report to the company ?