Whirlpool WTW5015LW manual

Whirlpool WTW5015LW
9 · 2
PDF manual
 · 24 pages
English
manualWhirlpool WTW5015LW
15

Pièces nécessaires : (si non fournies avec la

laveuse)

Tuyaux d’arrivée d’eau avec
rondelles plates.
REMARQUE : Différentes
options de tuyau d’arrivée
d’eau sont offertes; consulter
votre guide de démarrage
rapide pour les informations de
commande.

Pièces supplémentaires : (non fournies avec la

laveuse)

Il se peut que l’installation nécessite des pièces supplémentaires.
Pour commander, consulter les coordonnées indiquées dans le
guide de démarrage rapide.
Si vous avez : Il vous faudra :
Égout surélevé
Tuyau rigide d’évacuation standard de
20 gal (76 L) de 39 po (990 mm) de
haut ou évier de décharge, pompe de
puisard et connecteurs (offerts chez les
vendeurs de matériel de plomberie
locaux)
Tuyau de rejet à l’égout
de 1 po (25 mm)
Adaptateur de 2 po (51 mm) à 1 po
(25 mm) de diamètre pour le tuyau de
rejet à l’égout et ensemble de
raccordement.
Tuyau de vidange trop
court
Extension de tuyau de vidange et
ensemble de raccordement
Système d’évacuation
obstrué par des
peluches
Ensemble de protection et de
raccordement du drain

Exigences d’emplacement

Le choix d’un emplacement approprié pour la laveuse en améliore
le rendement et réduit au minimum le bruit et le « déplacement »
possible de la laveuse. La laveuse peut être installée dans un
sous-sol, une salle de buanderie, un placard ou un encastrement.
IMPORTANT : Ne pas installer, remiser ou faire fonctionner la
laveuse à un emplacement elle sera exposée aux intempéries
ou à des températures inférieures à 32 °F (0 °C). De l’eau restée
dans la laveuse après utilisation peut causer des dommages à
basse température. Voir « Entretien et nettoyage de la laveuse »
pour des renseignements sur la préparation de la laveuse pour
l’hiver.
C’est à l’utilisateur qu’incombe la responsabilité de réaliser une
installation correcte.
Il vous faudra :
Un chauffe-eau réglé à 120 °F (49 °C).
Une prise électrique reliée à la terre et située à moins de 4 pi
(1,2 m) du cordon d’alimentation à l’arrière de la laveuse.
Des robinets d’eau chaude et d’eau froide situés à moins de
3 pi (0,9 m) des électrovannes de remplissage d’eau chaude
et d’eau froide sur la laveuse, et une pression d’eau de
20 à 100 lb/po² (138 à 690 kPa).
Un plancher de niveau avec une pente maximale de 1 po
(25 mm) sous l’ensemble de la laveuse. Il n’est pas
recommandé de l’installer sur un tapis, de la moquette ou des
surfaces avec endos en mousse.
Un plancher capable de supporter le poids total de 315 lb
(143 kg) de la laveuse (eau et charge compris).

Installation dans un encastrement ou une armoire

3 po
(76 mm)
3 po
(76 mm)
24 po
2
(155 cm
2
)
48 po
2
(310 cm
2
)
1 po
(25 mm)
1 po
(25 mm)
5 po
(126 mm)
14 po
(356 mm)
maximum
20 po
(508 mm)
REMARQUE : Toutes les laveuses de 27 po de large devraient
avoir un dégagement de 19 po (482 mm), alors que les laveuses
de 29 po devraient avoir un dégagement de 22 po (559 mm).
Toutes les dimensions représentent les dégagements
recommandés permis, hormis pour les ouvertures de ventilation
de la porte de l’armoire qui correspondent aux dimensions
minimales nécessaires. Cette laveuse a été testée pour une
installation avec dégagement de 0 po
(0 mm) sur les côtés. On peut éventuellement laisser davantage
de dégagement pour faciliter l’installation et l’entretien, ainsi que
des distances de séparation pour les appareils ménagers voisins
et des dégagements pour les murs, portes et plinthes. Ajouter un
espace supplémentaire de 1 po (25 mm) de tous les côtés de la
laveuse pour réduire le transfert de bruit. Les portes doivent être à
persiennes ou équivalentes et avoir une surface ouverte d’au
moins 24 po
2
(155 cm
2
) en bas et 48 po
2
(210 cm
2
) en haut.
*Pour obtenir des détails (ou des informations) supplémentaires
en lien avec votre modèle, consulter le Guide de démarrage
rapide.

Système de vidange

Le système de vidange peut être installé à l’aide d’un conduit
d’évacuation au plancher, un tuyau rigide de rejet à l’égout mural,
un tuyau rigide de rejet à l’égout au plancher ou un évier de
buanderie. Sélectionner la méthode à utiliser.
IMPORTANT : Pour éviter un effet de siphon, ne pas introduire
plus de 4,5 po (114 mm) de tuyau de vidange à l’intérieur du tuyau
de rejet à l’égout ou sous la partie supérieure de la cuve de
lavage. Immobiliser le tuyau de vidange avec le serre-câbles.

Système de vidange avec tuyau de rejet à l’égout

au plancher

View the manual for the Whirlpool WTW5015LW here, for free. This manual comes under the category washing machines and has been rated by 2 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5015LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 46
D
DianaOctober 19, 2022

How do operate the washer? I can't seem to get to the wash. cycle

2 comments
E
Emma of manua.lsOctober 25, 2023

To use the Whirlpool WTW5015LW washing machine and access the wash cycle, follow these steps: 1. Cleaning the dispensers: - For dispensers that cannot be removed, wipe them with an affresh® Machine Cleaning Wipe or a damp cloth and then dry with a towel. - For removable dispensers, take out the drawer (if applicable) and clean it with an affresh® Machine Cleaning Wipe or a damp cloth before or after running the Clean Washer cycle. 2. Cleaning the outside of the washer: - Use an affresh® Machine Cleaning Wipe, a soft damp cloth, or a sponge to wipe away any spills. - Avoid using abrasive products to prevent damaging the washer's finish. 3. Operating the washer: - Plug the washer into a grounded 3-prong outlet. - Do not remove the ground prong or use an adapter or extension cord. - Flush water pipes and hoses before using the washer again. - Reconnect water inlet hoses and turn on both water faucets. - Select the desired wash cycle according to the online Cycle Guide for your specific model. - Use only HE (High Efficiency) detergent and follow the manufacturer's recommended amount for a medium-size load.

This answer is automatically generated
T
TimSeptember 21, 2023

Did you ever figure it out? I have the same problem.

R
Rachel September 1, 2022

Is there a reset button ? I even tried to run the clean machine and ask it does is click

G
GwenOctober 29, 2022

The model has a d on the end. I can’t get the washer to start. It’s filled with water

D
Donna L MeckfesselJune 18, 2023

Why do my dark clothes have a white residue on them? I don't add too much detergent. It happens with liquid and the pods.

T
TanyaJuly 1, 2023

How can I keep the water filling up with the lid open? I like to add my detergent and add water to get soapy before I adding the clothes. With the lid lock option on, everytime I open the lid water drains out.

F
Fitzhugh Havens August 14, 2023

No instructions how to start the washer,I push the button to turn it on,then push and hold the start button until my thumb hurts and nothing happens.

2 comments
T
TimSeptember 21, 2023

Did you ever figure it out?I have the same problem.

C
Carol RossNovember 23, 2023

same

K
KathySeptember 5, 2023

Why does it take so long to wash a load? I'm a single person who only has small loads. I put it on Sense. It takes at least an hour to complete. How is this high efficiency?

M
Milicent December 6, 2023

The following lights are flaahing simultaneously Sense and Lid then Soak and Wash. What needs to be done to fix this problem?

S
Sharon Bagwell December 26, 2023

If you need to open the door of the washer after it’s started and it has locked how do you do that?

M
Maria ValadezApril 9, 2024

My washer machine is new one and the rinse switch is not working, what can I do, do I need to report to the company ?

The Whirlpool WTW5015LW washing machine is a standard top-loading unit that measures 27.5 x 26 x 42 inches and has a total capacity of 3.5 cubic feet. It comes equipped with 9 different washing cycles, including a deep-water wash cycle that allows users to customize the amount of water used for each load. The machine also features a heavy-duty agitator, which helps to remove tough stains and dirt from clothing and linens. This machine uses an impeller-type washing system, which is designed to be gentler on fabrics and more efficient at getting clothes clean. The unit includes a variety of different temperature settings, including hot, warm, and cold, allowing users to customize the wash to their specific needs. The Whirlpool WTW5015LW also features a number of other useful features, including a delay start option, which lets users program the machine to start washing at a later time. Additionally, this machine features a clean washer cycle, which helps to remove any built-up residue or odors that may be present inside the unit. Overall, the Whirlpool WTW5015LW is a reliable and efficient washing machine that offers a variety of useful features for users looking to get their laundry done quickly and efficiently.

General
BrandWhirlpool
ModelWTW5015LW
Productwashing machine
EAN883049604725
LanguageEnglish
FiletypeUser manual (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5015LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my washing machine not turning on?

Check if the power cord is properly plugged into the electrical outlet and ensure there is power supply. Additionally, ensure the lid is closed properly as some models may not start if the lid is not securely latched.

Why is my washing machine not filling with water?

Make sure the water supply faucets are fully turned on. Inspect the water hose connections at the back of the machine to ensure they are securely attached. Also, verify that the water inlet valve screens are not clogged.

My washing machine is not draining properly, what could be the cause?

Check if the drain hose is correctly installed, ensuring it is not kinked, twisted, or clogged. Ensure that the pump filter is clean and free from debris. Also, verify that the drain hose is not inserted too far into the standpipe, as this can cause siphoning.

Why is my washing machine not spinning during the cycle?

Ensure the load is properly balanced inside the drum. Large and heavy items may cause an imbalance, resulting in the machine not spinning. Additionally, check if the lid is closed tightly, as some models have a safety feature that stops spinning if the lid is not secure.

My clothes are not getting cleaned properly, what should I do?

Confirm that you are using the recommended amount of detergent according to the load size and soil level. Make sure the selected wash cycle is appropriate for the type of garments you are washing. Consider sorting the laundry by fabric type and adjust the water temperature setting accordingly.

Is the manual of the Whirlpool WTW5015LW available in English?

Yes, the manual of the Whirlpool WTW5015LW is available in English .

Is your question not listed? Ask your question here

No results