Whirlpool WTW5010LW manual

Whirlpool WTW5010LW
8.7 · 6
PDF manual
 · 21 pages
English
manualWhirlpool WTW5010LW
16
Diamètre minimal pour un tuyau de rejet à l’égout : 2 po (51 mm).
Capacité minimale d’acheminement : 17 gallon (64 L) par minute.
Le sommet du tuyau de rejet à l’égout doit avoir une hauteur d’au
moins 39 po (990 mm); ne pas l’installer à plus de 96 po (2,44 m)
du fond de la laveuse. Si on doit l’installer à plus de 96 po (2,44 m)
de hauteur, un système de pompe de puisard est nécessaire.

Système de vidange avec tuyau de rejet à l’égout

mural

Voir les exigences dans la section « système de vidange avec
tuyau de rejet à l’égout au plancher ».

Système de vidange dans un évier de buanderie

Capacité minimale : 20 gallon (76 L). Le sommet de l’évier de
buanderie doit se trouver à au moins 39 po (990 mm) du plancher;
ne pas l’installer à plus de 96 po (2,44 m) du fond de la laveuse.

Système de vidange au sol

Le système de vidange au sol requiert un ensemble de brise-
siphon, deux ensembles de raccordement et une rallonge de
tuyau de vidange qui peuvent être achetés séparément; consulter
le guide de démarrage rapide pour les renseignements de
commande en ligne. Hauteur minimale du brise-siphon : 28 po
(710 mm) du bas de la laveuse (des tuyaux supplémentaires
peuvent être requis).

Spécifications électriques

AVERTISSEMENT

Risque de choc électrique
Brancher l’appareil sur une prise à 3 alvéoles reliée à la
terre.
Ne pas enlever la prise de liaison à la terre.
Ne pas utiliser d’adaptateur.
Ne pas utiliser de rallonge.
Le non-respect de ces instructions peut causer un
décès, un incendie ou un choc électrique.
Une source d’alimentation de 120 V CA à 60 Hz uniquement et
protégée par fusible de 15 ou 20 A est nécessaire. On
recommande l’emploi d’un fusible ou d’un disjoncteur
temporisé. Il est recommandé de raccorder l’appareil sur un
circuit distinct exclusif à cet appareil.
Cette laveuse comporte un cordon d’alimentation électrique à
trois broches
pour liaison à la terre.
Pour minimiser les risques de choc électrique, on doit
brancher le cordon sur une prise de courant de configuration
correspondante, à 3 alvéoles, reliée à la terre et installée
conformément aux codes et règlements locaux. Si une prise
de courant de configuration correspondante n’est pas
disponible, le client a la responsabilité et l’obligation de faire
installer par un électricien qualifié une prise de courant
correctement reliée à la terre
Si les codes le permettent et si l’on utilise un conducteur
distlnct de liaison à la terre, il est recommandé qu’un
électricien qualifié vérifie la qualité de la liaison à la terre.
Ne pas utiliser une tuyauterie de gaz pour le raccordement à la
terre.
En cas de doute quant à la qualité de la liaison à la terre de la
laveuse, consulter un électricien qualifié.
Ne pas installer un fusible dans le conducteur neutre ou le
circuit de liaison à la terre.

View the manual for the Whirlpool WTW5010LW here, for free. This manual comes under the category washing machines and has been rated by 6 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW5010LW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 79
M
Mike MermelsteinDecember 29, 2022

Where should I pour my fabric softener in this model?

This message has been automatically translated
4 comments
E
Emma of manua.lsOctober 24, 2023

You can put fabric softener in the Whirlpool WTW5010LW washing machine by following these steps: 1. Open the washer lid and remove any clothing or items. 2. Place the fabric softener in the designated fabric softener dispenser. 3. Close the washer lid. 4. Select the desired wash cycle and start the machine.

This answer is automatically generated
L
Linda ThomasApril 6, 2023

where do i put my fabric softner

L
Linda TrimbleJune 9, 2023

Since no manual came with the washer, I cannot find where the fabric softner goes.

E
elliJune 11, 2024

hello, the washer only soaks, but doesn’t complete the cycle. it’s a wtw5010lw0 type 589-20

H
Heidi A GambacciniJune 11, 2024

how do I open the washer to add laundry I've forgotten once Ive started machine?

T
Tony AmitranoMay 11, 2024

The Cycle Modifiers have a "faucet" selection to run water. Can I change the water to be used to a certain temperature setting or will it always use a set water temp? If set, is it Hot or Cold water inlet selected?

L
Larry PattonMarch 20, 2022

Machine’s on and off button and hold to start button do not work. I press them and nothing happens. Other lights are working so the power is on.

D
Dorinda A StewartAugust 28, 2022

What are the recommendations for the amount of clothing, towels, sheets, etc. that can be safely put in the machine?

R
Ray BoldosserNovember 18, 2022

Washer drains upward to sewer connection approximately 6 feet. The installer looped (in a circle) the drain hose just behind the washer discharge and placed the hose in an extension hose that feeds into the outside sewer connection. That top section of hose does have a "question mark" type hook end (like a small case f) that is inserted to the outside drain. I am being told by the store that a "loop" near the bottom discharge connection is needed as an air pocket similar to what is found on a kitchen sink drain. Is that the proper installation, or can I just do a straight connection into the second part of the discharge line? Installers have been out twice as the hose once popped off, and several weeks later the bottom hose wore through where it was looped. I'm trying to avoid flooding the laundry room for the third time. :)

A
Amy jonesDecember 15, 2022

I can’t get my washer to start. Some of the lights will flash, but nothing happens.

I can’t get my washer to start. Some of the lights will flash, but nothing happens.
zoom-in
View photo
B
Brian WilsonDecember 24, 2022

Is there a final rinse alert on this model for the final rinse? We are having a hard to catching it at the right time to add fabric softener

1 comment
T
Teresa Campbell June 10, 2024

@Brian Wilson Me, too!

J
Judy WilsonApril 30, 2023

Wash cycle times,capacities,usuage. How long does the “quick wash” take vs the normal. How long and when used is the drain and spin cycle? Just bought washing machine…want to use correctly. Thanks.

The Whirlpool WTW5010LW is a washing machine that offers efficient and reliable performance. Designed to handle various laundry loads, this washer is equipped with a spacious drum that can accommodate large items such as bedding and towels. With its multiple wash cycles and options, users can select the appropriate settings for their specific needs. Featuring a top-loading design, the WTW5010LW has a generous capacity, allowing users to wash more laundry in one go. The machine also incorporates a number of advanced features, including a high-efficiency impeller that thoroughly cleans clothes while using less water and energy. This ensures that clothes are not only cleaned effectively but also helps save on utility bills. The washer also comes with a variety of convenient features such as a delay start option, which allows users to set the machine to start at a later time. This feature is particularly useful for busy households with varying schedules. In addition, the WTW5010LW boasts a durable construction, ensuring that it can withstand regular use over time. Its sleek and modern design adds a touch of style to any laundry room, while its quiet operation minimizes noise disruption. Overall, the Whirlpool WTW5010LW is a reliable and efficient washing machine that offers convenient features and delivers exceptional cleaning results.

General
BrandWhirlpool
ModelWTW5010LW
Productwashing machine
EAN883049604817
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW5010LW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my washing machine not turning on?

Check if the power cord is securely plugged into a functioning electrical outlet and if the circuit breaker has not tripped.

Why is my washing machine not filling with water?

Ensure that both the hot and cold water supply faucets are fully turned on and that the water inlet hoses are not kinked or clogged.

How can I resolve excessive vibrations during the spin cycle?

Make sure the washing machine is properly leveled on a sturdy surface and that the load inside the drum is balanced.

Why is my washing machine not draining water after a cycle?

Verify that the drain hose is not kinked or blocked, and that the drain hose is inserted at the correct height to allow for proper drainage.

What should I do if my clothes come out still wet after a completed cycle?

Check if the spin speed was set appropriately for the load size and if the wash cycle selected includes a high-speed spin. Additionally, the washer's drain pump filter may need to be cleaned if it is clogged.

Is the manual of the Whirlpool WTW5010LW available in English?

Yes, the manual of the Whirlpool WTW5010LW is available in English .

Is your question not listed? Ask your question here

No results