Whirlpool WTW4957PW manual

Whirlpool WTW4957PW
9.7 · 1
PDF manual
 · 20 pages
English
manualWhirlpool WTW4957PW
16

Spécifications électriques

A VERTISSEMENT

Risque de choc électrique
Brancher sur une prise à 3 alvéoles reliée à la terre.
Ne pas enlever la broche de liaison à la terre.
Ne pas utiliser un adaptateur.
Ne pas utiliser un câble de rallonge.
Le non-respect de ces instructions peut causer un
décès, un incendie ou un choc électrique.
Une source d’alimentation de 120 V CA à 60 Hz uniquement et
protégée par fusible de 15 ou 20 A est nécessaire. On
recommande l’emploi d’un fusible ou d’un disjoncteur
temporisé. Il est recommandé de raccorder l’appareil sur un
circuit distinct exclusif à cet appareil.
Cette laveuse comporte un cordon d’alimentation électrique à
trois broches
pour liaison à la terre.
Pour minimiser les risques de choc électrique, on doit
brancher le cordon sur une prise de courant de configuration
correspondante, à 3 alvéoles, reliée à la terre et installée
conformément aux codes et règlements locaux. Si une prise
de courant de configuration correspondante n’est pas
disponible, le client a la responsabilité et l’obligation de faire
installer par un électricien qualifié une prise de courant
correctement reliée à la terre
Si les codes le permettent et si l’on utilise un conducteur
distlnct de liaison à la terre, il est recommandé qu’un
électricien qualifié vérifie la qualité de la liaison à la terre.
Ne pas utiliser une tuyauterie de gaz pour le raccordement à la
terre.
En cas de doute quant à la qualité de la liaison à la terre de la
laveuse, consulter un électricien qualifié.
Ne pas installer un fusible dans le conducteur neutre ou le
circuit de liaison à la terre.
INSTRUCTIONS DE LIAISON À LA TERRE
Appareils à cordon mis à la terre:
Cet appareil doit être mis à la terre. En cas de mauvais
fonctionnement ou de bris de l’appareil, la mise à la terre
réduira les risques de choc électrique en offrant un parcours
de moindre résistance au courant électrique. Cet appareil est
pourvu d’un cordon à conducteur de terre et d’une fiche de
miseà la terre. Brancher la fiche dans une prise installée
adéquatement et mise à terre conformément à tous les codes
et règlements locaux.
AVERTISSEMENT: Une mauvaise connexion du
conducteur de terre peut présenter des risques de choc
électrique. Consulter un électricien ou un technicien qualifiés
si vous n’êtes pas certain que appareil soit mis à terre
adéquatement. Ne pas modifier
la fiche de l’appareil: Si elle
ne pénètre pas bien dans la prise, faire installer une prise
adéquate par un électricien qualifié.
Appareils raccordés à demeure:
Cet appareil doit être relié à une canalisation électrique
métallique fixe ou la dérivation doit comporter un conducteur
de terre connecté à la borne ou au fil de terre de l’appareil.
CONSERVER CES INSTRUCTIONS

INSTALLATION

Déballage

A VERTISSEMENT

Risque du poids excessif
Utiliser deux personnes ou plus pour déplacer et installer
ou désinstaller l’appareil.
Le non-respect de cette instruction peut causer une
blessure au dos ou d'autre blessure.
Avant de commencer : retirer le matériel d’expédition
Il est nécessaire de retirer tout le matériel d’expédition pour un
fonctionnement correct et pour éviter que la laveuse ne fasse trop
de bruit.
1. Déplacer la laveuse
Déplacer la laveuse à moins de 4 pi (1,2 m) de son
emplacement final, elle doit être en position complètement
verticale.
REMARQUE : Pour éviter d’endommager le plancher,
installer la laveuse sur un carton avant de la déplacer. Assurer
que le couvercle et retenu en place avec le ruban adhésif.

View the manual for the Whirlpool WTW4957PW here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW4957PW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 14
S
Sharon GeisertJune 9, 2024

I press the button but the water doesn’t always start. It happened yesterday as well but now it won’t start for anything. It is new this year.

B
Becky November 11, 2023

Just bought a wtw4957pw. It blinks on sensing fill forever. I have got it to work twice. What is the trick to getting it to fill with water? I really need to do the laundry. I am not impressed so far.

1 comment
D
DianaFebruary 20, 2024

@Becky - Mine overfills on a small load and dry washes the rest of my laundry because it only puts a small amount of water in it. I have been bucketing water in but I think I will switch to the garden hose. It's brand new and never washes/fills the same way twice. I hate this machine.

D
DianaFebruary 20, 2024

What exactly does soil level control on MY washing machine- only wash length or agitation or both? What is the wash time difference between the settings on the machine? Are there more than one agitation setting? Is it only difference in setting the speed of the spin cycle? How long is the wash time on the different settings? What is the difference between the settings?

C
CAROL PERRISJune 3, 2024

Hello. I need a users manual not an installation guide for washer WTW4957PW0. I’m having a very difficult time with the water level of a wash load. Help! Thank you

D
DianaFebruary 20, 2024

why is my brand new washer dry washing the clothes? Ex large load puts only 1/4 amount of water. small load put 1/2 tub of water more than for the ex large load. Never washes the same way twice never enough water and is twisting and ruining my laundry.

M
Mary Ellen RuitenbergMarch 28, 2024

re: Model number WTW4957PW your cycle guide states..."Not all setting and options are available on each cycle." Can you please tell me which cycles have options?

H
Harris SacksApril 20, 2024

How to use the spin cycle only

A
Adele WeinsteinNovember 29, 2023

Is there a sound when the wash is finished

C
Cheryl CapotostoDecember 7, 2023

how do we add liquid softner

S
Shirley WisemanMarch 8, 2024

Brand new, no water comes in. Stays on water sensing.

The Whirlpool WTW4957PW is a washing machine that offers effective cleaning and convenient features. With a spacious capacity, it can handle large loads of laundry, making it suitable for households with heavy washing needs. It has multiple wash cycles and options that allow users to customize their laundry experience based on their specific needs. The machine is equipped with a durable drum that ensures long-lasting performance and can withstand regular use. Built with quality materials, it is designed to provide reliable and efficient operation. This washing machine is designed with user-friendly controls, making it easy to operate. It has a straightforward interface that allows users to select the desired cycle and customize relevant settings. The machine also offers various temperature options, allowing users to adjust the water temperature according to their preference and the fabric's requirements. Additionally, the Whirlpool WTW4957PW features advanced water and energy-saving technologies, helping users reduce their environmental impact and utility costs. It has a high spin speed, which efficiently removes moisture from clothes, reducing drying time. The machine also incorporates noise reduction technology, ensuring quiet operation and minimizing disruptions in the household. Overall, the Whirlpool WTW4957PW is a reliable washing machine that offers efficient performance and convenient features. Its spacious capacity, multiple wash cycles, customizable options, and energy-saving features make it a suitable choice for households seeking an effective laundry solution.

General
BrandWhirlpool
ModelWTW4957PW
Productwashing machine
EAN883049676906
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW4957PW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

How can I troubleshoot any safety issues with the Whirlpool WTW4957PW washing machine?

To troubleshoot any safety issues with the Whirlpool WTW4957PW washing machine, follow these steps: 1. Read all the safety instructions provided in the manual and on the appliance. Pay attention to any safety alert symbols, such as the symbol for potential hazards. 2. Make sure not to wash articles that have been previously cleaned, washed, soaked, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances. These substances can give off vapors that could ignite or explode. 3. Avoid adding gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water, as they can also give off vapors that could ignite or explode. 4. If the hot-water system has not been used for 2 weeks or more, there may be a risk of hydrogen gas buildup. Before using the washing machine, turn on all hot-water faucets and let the water flow from each for several minutes to release any accumulated hydrogen gas. Do not smoke or use an open flame during this time. 5. Ensure close supervision of children when the appliance is in use near them. Do not allow them to play on or in the appliance. 6. Before removing the appliance from service or discarding it, remove the door. 7. Avoid reaching into the appliance while the tub or agitator is moving. 8. Install and store the appliance in a location where it will not be exposed to the weather. 9. Do not tamper with controls and avoid repairing or replacing any part of the appliance unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out. 10. Use only recommended replacement parts from the manufacturer. Remember to always prioritize safety and follow these guidelines to troubleshoot any safety issues with the Whirlpool WTW4957PW washing machine.

What maintenance and care steps should I follow for the Whirlpool WTW4957PW washing machine?

To properly maintain and care for the Whirlpool WTW4957PW washing machine, follow these steps: 1. Cleaning the Dispensers: - For non-removable dispensers, wipe them with an affresh® Machine Cleaning Wipe or a damp cloth. - For removable dispensers, remove the drawer and clean it with an affresh® Machine Cleaning Wipe or a damp cloth. 2. Cleaning the Exterior: - Use an affresh® Machine Cleaning Wipe, a soft damp cloth, or a sponge to wipe away any spills on the external surfaces. - Avoid using abrasive products that may damage the washer's finish. 3. Nonuse and Vacation Care: - Operate the washer only when you are at home. - If not using the washer for a period of time, unplug or disconnect the power. - Turn off the water supply to avoid flooding. - If storing or moving the washer during freezing weather, follow the winter storage care instructions. 4. Transporting the Washer: - Shut off both water faucets and disconnect and drain the water inlet hoses. - If moving during freezing weather, follow the winter storage care instructions before moving. - Disconnect the drain hose from the drain system and drain any remaining water. - Unplug the power cord and secure it inside the washer basket. - Use original shipping materials or heavy blankets/towels to protect the washer during transportation. 5. Reinstalling/Using the Washer Again: - Refer to the installation instructions to locate, level, and connect the washer. - Flush water pipes and hoses before using again. - Reconnect water inlet hoses, turn on both water faucets, and plug the washer into a grounded 3-prong outlet. By following these maintenance and care steps, you can ensure the proper functioning and longevity of your Whirlpool WTW4957PW washing machine.

How can I troubleshoot any issues with the water inlet hoses of the Whirlpool WTW4957PW washing machine?

To troubleshoot any issues with the water inlet hoses of the Whirlpool WTW4957PW washing machine, follow these steps: 1. Check for Hose Damage: - Inspect the water inlet hoses for any bulges, kinks, cuts, wear, or leaks. - If any damage is found, replace the hoses to prevent further issues. 2. Clear Water Lines: - Run water through the hoses into a laundry tub, drain pipe, or bucket to ensure there are no clogs. - The water should run until it is clear, indicating that the lines are free from any obstructions. 3. Properly Connect the Inlet Hoses: - Attach the hot water hose to the hot water inlet valve and the cold water hose to the cold water inlet valve. - Hand-tighten the couplings until snug, and then use pliers to tighten them an additional two-thirds turn. 4. Check for Leaks: - Turn on the water faucets to check for any leaks. - It is normal for a small amount of water to enter the washer, which will drain later. 5. Secure the Drain Hose: - Ensure that the drain hose is securely attached to a laundry tub leg, drain standpipe, or wall standpipe using a cable tie. - This will prevent the hose from coming out or leaking during operation. By following these troubleshooting steps, you can address any issues with the water inlet hoses of the Whirlpool WTW4957PW washing machine and ensure proper functioning.

What care steps should I follow to ensure the proper functioning of the Whirlpool WTW4957PW washing machine?

To ensure the proper functioning of the Whirlpool WTW4957PW washing machine, follow these care steps: 1. Use High-Efficiency (HE) Detergents: - Only use HE detergents specifically designed for high-efficiency washers. - Follow the manufacturer's instructions on the recommended amount of detergent to use. 2. Use Warm and Hot Wash Water Settings: - Occasionally use warm and hot water settings instead of exclusively cold water washes. - Warm and hot water settings help control the accumulation of soils and detergent residue. 3. Leave the Washer Lid Open: - After each use, leave the washer lid open to allow the interior to dry out and prevent the buildup of odor-causing residue. 4. Clean the Washer Regularly: - Perform a monthly cleaning procedure to keep the washer clean and odor-free. - Use affresh® Washer Cleaner tablets or liquid chlorine bleach in the recommended cycle for cleaning the inside of the washer. - Follow the specific instructions provided in the manual for the "Clean Washer" cycle or alternative cleaning methods. 5. Clean the Dispensers: - Periodically clean the dispensers to remove any residue buildup. - Note that the dispensers are not dishwasher-safe. By following these care steps, you can ensure the proper functioning and cleanliness of your Whirlpool WTW4957PW washing machine.

How should I care for the Whirlpool WTW4957PW washing machine when it is not in use or during vacation?

To care for the Whirlpool WTW4957PW washing machine when it is not in use or during vacation, follow these steps: 1. Nonuse Care: - If you are not using the washer for a period of time, unplug or disconnect the power to the washer. - Turn off the water supply to the washer to avoid any potential flooding due to water pressure surges. 2. Winter Storage Care: - If you are storing or moving the washer during freezing weather, follow these steps to winterize the washer: - Shut off both water faucets and disconnect and drain the water inlet hoses. - Put 1 liter (1 quart) of R.V.-type antifreeze in the washer basket and run the washer on the Rinse & Spin cycle for about 30 seconds to mix the antifreeze and remaining water. - Unplug the washer or disconnect the power. 3. Transporting the Washer: - Before moving the washer, shut off both water faucets and disconnect and drain the water inlet hoses. - Disconnect the drain hose from the drain system and drain any remaining water into a pan or bucket. - Unplug the power cord and place the inlet hoses and drain hose inside the washer basket. - Secure the power cord over the edge and into the washer basket. - If available, use the original shipping materials to protect the washer during transportation. If not available, place heavy blankets or towels into the basket opening and close the lid. 4. Reinstalling/Using the Washer Again: - Refer to the installation instructions to locate, level, and connect the washer. - Before using the washer again, flush the water pipes and hoses. - Reconnect the water inlet hoses and turn on both water faucets. - Plug the washer into a grounded 3-prong outlet or reconnect the power. By following these care steps, you can ensure the proper storage, transportation, and reinstallation of the Whirlpool WTW4957PW washing machine.

Is the manual of the Whirlpool WTW4957PW available in English?

Yes, the manual of the Whirlpool WTW4957PW is available in English .

Is your question not listed? Ask your question here

No results