Whirlpool WTW4855HW manual

Whirlpool WTW4855HW
9.4 · 11
PDF manual
 · 40 pages
English
manualWhirlpool WTW4855HW
W11556499A
W11556538A-SP

Top Load Washer Quick Start Guide

OPERATING INSTRUCTIONS

WARNING

Fire HazardNever place items in the washer that are dampenedwith gasoline or other flammable fluids.No washer can completely remove oil.
Do not dry anything that has ever had any type of oil
on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance's Owner's Manual, before operating this appliance.
NOTES:
Not all features and cycles are on all models, and control panel
appearance may vary.
If your model has a touch interface, the control panel features a
sensitive surface that responds to a light touch of your finger. To
ensure your selections are registered, touch the control panel with
your fingertip, not your fingernail. When selecting a setting or
option, simply touch its name.
If your model has physical buttons, make sure to press the button
firmly.
At cycle completion, your setting and option choices will be
remembered for the next cycle. However, if power to the washer
is lost, the settings and options will go back to the factory defaults.
Step 1. Add HE Detergent
NOTE: See the “Adding Laundry
Products” section for more
information on adding HE
detergent, fabric softener, and/or
bleach.
Step 2. Load Clothes
For best results, load garments in
loose heaps evenly around basket
wall.
Step 3. Close Lid; then Select Cycleand SettingsStep 4. Press Start/Pause/Cancel
Cycle Guide – Normal Cycle
For best fabric care, choose the cycle that best fits the load being washed. Recommended settings for best
performance are shown in bold. Not all cycles and options are available on all models. Not all settings and
options are available on each cycle.
NOTE: All rinses are cold.
Items to Wash: Cycle: Temperature: Description:
Cottons, linens, and
mixed-garment loads
Normal Hot
Warm
Cool
Cold
Tap Cold
Use this cycle for normally soiled cottons
and mixed-fabric loads. A high spin speed
is the default for this cycle.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips,
please see the Owner’s Manual included with your machine.
For information on any of the following items, a full cycle guide, detailed product dimensions, or for complete
instructions for use and installation, please visit https://www.whirlpool.com/owners, or in Canada
https://www.whirlpool.ca/owners. This may save you the cost of a service call.
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–253–1301
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Canada:
1–800–807–6777
Whirlpool Brand Home Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
Button Descriptions
SOIL LEVEL (on some models)
Select the setting most suitable for your load. For heavily soiled and sturdy
fabrics, select Heavy Soil Level for more wash time. For lightly soiled and
delicate fabrics, select Light or Extra Light Soil Level for less wash time. A
lighter soil-level setting will help reduce tangling and wrinkling.
WASH TEMP
Wash Temp senses and maintains uniform water temperatures by
regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric and soils being
washed. For best results, follow the garment label instructions using the
warmest wash water safe for your fabric.
Designed to use only HE High
Efficiency detergents.
NOTES:
On some models and cycles, warm and hot water may be cooler
than your previous washer.
Even in a cold- or cool-water wash, some warm water may be added
to the washer to maintain a minimum temperature. All rinses are
cold.
WASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your washer.
Turn the knob to select a cycle for your laundry load. See online “Cycle
Guide” for detailed descriptions.
RINSE OPTION
Select the option most suitable for your load. Select Auto with Extra
Rinse, Deep Water Rinse, or Deep Water with Extra Rinse if using fabric
softener during a cycle. It ensures that fabric softener is added at the
correct time in the rinse for even distribution.
WATER LEVEL
Set the Water Level knob to the Auto Sensing setting and the washer
will automatically sense the appropriate water level for the load size and
type.
Set the Water Level knob to the Deep Water Wash setting and the
washer will automatically add more water to any cycle at any time during
the wash process.
NOTE: Expect longer cycle times due to extended fill times when using
the Deep Water Wash option.
START/PAUSE BUTTON
Press to start the selected cycle. Press again to pause the cycle and
unlock the lid. Close the lid and press to restart the cycle. Press and
hold to cancel a cycle and pump out the water.
NOTE: If the washer is spinning, it may take several minutes to unlock the lid.
PROGRESS LIGHTS
The Progress lights show the progress of a cycle. At each stage of the
process, you may notice sounds or pauses that are different from traditional
washers.
Sensing/Fill
When the Start/Pause button is pressed and the Water Level knob is set to
Auto Sensing, the washer will fill and begin sensing to determine load size
and balance. A short but noticeable pause in the cycle action occurs during
sensing. This is normal.
Once sensing is complete, the washer will fill to the appropriate level for the
detected load size and, on select cycles, agitation will occur during filling.
This, too, is normal. When the washer is done filling, it will begin the wash
phase of the cycle.
To ensure that the most accurate load size is detected,
avoid
opening the lid during the “Sensing” phase.
NOTE: Sensing and wash phases will be paused by opening the unlocked lid.
Close the lid to resume the cycle. If the lid is left open for more than 10
minutes, the washer will cancel the cycle and pump out the water.
Wash
The washer will fill to the correct water level based on the load size and the
Water Level selection. Certain cycles may agitate during the fill process to
boost cleaning. When the wash cycle begins, you will hear the HE agitator
increase speed. The motor sounds may change at different stages in the
wash cycle while the washer performs different wash actions.
Adding Laundry Products
IMPORTANT: Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, buildup of mold or mildew. HE detergents should be low-
sudsing and quick-dispersing to produce the right amount of suds for the best performance.
Adding HE detergent to basket:
Add a measured amount of HE detergent or single-
dose laundry packets into the basket. If using Oxi-
type boosters, color-safe bleach, or fabric softener
crystals, add to the bottom of the washer basket
before adding clothes.
NOTE: Follow the manufacturer’s instructions to
determine the amount of laundry products to use.
Adding liquid chlorine bleach:
Do not overfill, dilute, or use more than
1 cup (236 mL). Do not use color-safe
bleach or Oxi products in the same
cycle with liquid chlorine bleach.
IMPORTANT: The Rinse Option knob must be set to Auto with Extra
Rinse, Deep Water Rinse, or Deep Water with Extra Rinse when using
fabric softener in the fabric softener dispenser. This ensures that
fabric softener is added at the correct time in the rinse phase and is
evenly distributed.
Adding liquid fabric softener to dispenser:
Pour a measured amount of liquid fabric softener into dispenser; always follow manufacturer’s directions for correct amount of fabric
softener based on your load size. Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the
underside of the rim. See Max Fill line arrows.
Adding liquid fabric softener manually to wash load:
During the final rinse, wait until the washer has completed filling and press the Start/Pause button to pause the washer. Lift the lid
and add the measured, recommended amount of liquid fabric softener. Do not use more than the recommended amount. Close the
lid and press the Start/Pause button again to start the washer. Always follow manufacturer’s directions for correct amount of fabric
softener based on your load size.
NOTE: The lid will automatically lock after the wash phase completes and
before the initial spinout occurs, and will remain locked for the rest of the
cycle.
Rinse
Certain cycles use a spray rinse, which adds water to the tub while the
basket spins. You may hear the motor turning on briefly (short hum) to
move the basket while filling. In some cases, you will hear sounds similar to
the wash cycle as the washer fills, rinses, and moves the load.
Final Spin
The washer spins the load at increasing speeds for proper water
removal
based on the selected cycle and spin speed.
Cycle Complete
Once the cycle is complete, the lid will unlock and this light will come on.
Remove the load promptly for best results.
Lid Locked
The Lid Locked feature allows for higher spin speeds. When lit, the lid is
locked and cannot be opened without pausing the cycle. When the light is
off, the lid can be opened.
To open the lid after it has been locked, press Start/Pause/Cancel. The lid
will unlock once the washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Press Start/Pause/Cancel
while the lid is closed to resume the cycle.
WARNING: Do not wash water-resistant or water repellant-type clothing.
Failure to closely follow these instructions may result in an abnormal vibrating and out-of balance condition that could result in physical injury, property damage, and/or appliance damage.

View the manual for the Whirlpool WTW4855HW here, for free. This manual comes under the category washing machines and has been rated by 11 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Whirlpool WTW4855HW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 47
F
FedericoMay 9, 2022

The red light indicating that the door is closed does not turn on, that is why the program does not continue and it stays in wash mode waiting. The red light sometimes turns on, sometimes it doesn't. Restarting it used to solve the problem, but now it doesn't even work that way. If you have an idea... thank you.

The red light indicating that the door is closed does not turn on, that is why the program does not continue and it stays in ...
zoom-in
View photo
This message has been automatically translated
B
Barbara GoyetteFebruary 5, 2024

I have washer model WTW4855HW3. The machine stopped at the wash cycle and would not rinse or spin. I took the clothes out and the water drained. Now it is stuck with the wash light blinking. Can it be rebooted? I have the extended warranty but no one answers after a half hour of wait time.

1 comment
E
Emma of manua.lsFebruary 21, 2024

To reboot the Whirlpool WTW4855HW washing machine, follow these steps: 1. Make sure the machine is plugged into a power source. 2. Press the START/PAUSE/CANCEL button to stop the current cycle. 3. Remove any clothes from the machine and ensure that the water has drained. 4. Press the START/PAUSE/CANCEL button again to start a new cycle. 5. If the wash light continues to blink, run a Rinse & Spin cycle to rinse any remaining cleaner from the washer.

This answer is automatically generated
J
Joan C LaurenceFebruary 22, 2021

how do you do a full cycle with this washer? it stops after wash and i have to run it again for rinse and spin

1 comment
E
Emma of manua.lsOctober 24, 2023

To complete a cycle with the Whirlpool WTW4855HW washer, please follow these steps: 1. Load your laundry into the washer and close the lid. 2. Set the Water Level knob to your desired water level or leave it on Auto Sensing for the washer to determine the appropriate level based on the load size. 3. Use the control panel to select your desired cycle and options. 4. Press the START/PAUSE/CANCEL button to start the cycle. 5. The Progress Lights on the control panel will indicate the progress of the cycle. Different stages of the process may have unique sounds or pauses compared to traditional washers. 6. During the cycle, the washer will go through the following phases: - Sensing/Fill: The washer will fill and begin sensing to determine the load size and balance. There might be a brief pause during this phase. Once sensing is complete, the washer will fill to the appropriate level. On select cycles, agitation may occur during filling. - Wash: The washer will fill to the correct water level and perform the wash action. The HE agitator may increase speed at various stages of the wash cycle. - Rinse: Certain cycles utilize a spray rinse, which adds water to the tub while the basket spins. You may hear the motor briefly turn on to move the basket while filling. - Final Spin: The washer will spin the load at increasing speeds to remove water based on the selected cycle and spin speed. 7. Once the cycle is complete, the lid will unlock, and the Cycle Complete light will illuminate. Promptly remove your laundry for optimal results. 8. If the lid is locked, press the START/PAUSE/CANCEL button to unlock it. The lid will unlock once the washer movement has stopped.

This answer is automatically generated
T
TOM SIMPSONDecember 26, 2022

the auto sensing on washer onlys fill a little water in a big load. if switched to max water it still only auto senses and stays low..new washer?? Can I adjust the sensing unit to give more water?

2 comments
E
Emma of manua.lsOctober 26, 2023

Yes, the Whirlpool WTW4855HW washing machine's auto sensing feature only fills a small amount of water in a large load. Even when switched to maximum water, it still auto senses and remains low. It is not possible to adjust the sensing unit to provide more water.

This answer is automatically generated
B
BarbaraSeptember 4, 2023

Mine did the same since I bought it. I have to do it on the bulky wash cycle. Then I still have to open a little little and close it open and close it to add more water. I just dealt with it but it is a drag. Trying to see how to replace the agitator right now. I ran across something about the water level it's in the back of the machine some kind of adjustment. I've had this for 4 years so don't guess I'm going to worry about that right now. Sorry wish I could be more help,.... doesn't look like there's any answers on here.

L
LourdesApril 10, 2022

My washer is stopping at spin or rinse and not finishing the cycle. What can I do?

This message has been automatically translated
C
ChristineJanuary 3, 2022

On any wash option I select, why doesn't water cover clothes?

1 comment
E
Emma of manua.lsOctober 24, 2023

On the Whirlpool WTW4855HW washing machine, if the water does not cover the clothes regardless of the wash option selected, there are several possible causes and solutions: 1. Make sure to load the garments as recommended. Spread them evenly around the basket wall and avoid tightly packing the load. Also, only load dry items. 2. Check the pockets for sharp items like pins or coins before washing. Empty the pockets, zip zippers, and fasten any hooks or snaps to prevent snags and tears. 3. Tie all strings and straps before starting the wash load to prevent tangling. 4. Mend any rips or broken threads in seams before washing the items. 5. Tight packing the load can cause fabric damage. Load garments in loose heaps evenly around the basket wall and only load dry items. You can also try using the Bulky/Sheets cycle for more water or set the Water Level knob to the Deep Water Wash setting. 6. If you use liquid chlorine bleach, make sure to add it correctly. Do not pour it directly onto the load and clean up any spills. Using concentrated bleach can damage fabrics, so follow the recommended amount. Also, avoid placing load items on top of the bleach dispenser when loading and unloading the washer. 7. Follow the garment care instructions provided by the manufacturer. Always read and follow the care label on the garments. Consult the "Cycle Guide" to select the best cycle for your load. 8. If you notice any odors, it may be due to not following the recommended monthly maintenance. 9. Using too much detergent can affect the washer's performance. Measure the detergent correctly and follow the manufacturer's directions. If none of these solutions solve the problem, please visit the Whirlpool website at www.whirlpool.com/owners (or www.whirlpool.ca/owners in Canada).

This answer is automatically generated
L
LindaMay 29, 2024

I usually put detergent in and turn on machine before adding clothes how do I do this in this machine

L
Lauren ZumpettaJune 2, 2024

This machine doesn't fill on the Quick Wash cycle. The sensor light just blinks and blinks and never fills....10 minutes I waited.....but if I move the dial to Normal, it will fill and wash. I want use of the quick wash because this machine takes too long on Normal. Help!

K
KelliDecember 26, 2020

What should I do? I canceled a load mid wash and opened the lid then it made a weird sound so I unplugged it now when I plugg it back in it seems to be draining water but no sensor or indicator light come on.

S
StaceyNovember 22, 2021

How do I use the washing machine where it doesn’t take hours to wash my clothes can you plz walk me thru step by step for the shortest cycle to wash my clothes on

The Whirlpool WTW4855HW is a washing machine that offers efficient cleaning performance. With its large capacity, it allows for convenient washing of a significant amount of laundry in one cycle. This machine features a top-loading design, making it easily accessible and user-friendly. Equipped with multiple wash cycles and options, the WTW4855HW provides versatility for different types of fabrics and soil levels. The precise water level selection ensures efficient water usage and reduces wastage. Additionally, this washing machine features a reliable agitator that delivers thorough cleaning action. The WTW4855HW is designed with durability in mind. Its sturdy construction ensures long-lasting usage without compromising performance. It also incorporates advanced technology to provide optimal cleaning results while being energy-efficient. Moreover, this washing machine offers various convenience features. The control panel is intuitive and straightforward, allowing for easy operation and customization. The machine also includes a range of helpful features such as a delay start option and a status indicator, enhancing user experience. In conclusion, the Whirlpool WTW4855HW is a reliable and efficient washing machine that delivers effective cleaning performance. Its large capacity, versatile wash cycles, and user-friendly design make it a practical choice for households. With its durable construction and advanced features, this machine ensures long-lasting usage and energy-efficient operation.

General
BrandWhirlpool
ModelWTW4855HW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Use and Care Manual (PDF), Installation Guide (PDF), Quickstart Guide (PDF), Datasheet (PDF), Warranty information (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WTW4855HW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my washing machine not turning on?

Check if the power cord is securely plugged in and make sure the outlet has power. Additionally, ensure that the machine's lid is closed properly, as most models require the lid to be closed for operation.

How do I select the correct wash cycle?

Choose the appropriate wash cycle based on the type and amount of laundry you are washing. Refer to the manual for a detailed description of each cycle and its recommended usage.

What should I do if my clothes are coming out wet after a wash?

Ensure that you are not overloading the machine, as this can impede proper spinning and draining. Check if the drain hose is kinked or clogged, and make sure the water level is adequate for the load size. Also, check if the spin speed is set correctly for the load.

How can I prevent excessive vibration during the wash cycle?

Level your washing machine by adjusting the feet or using a leveling tool to ensure stability. Avoid overloading the machine, distribute the laundry evenly in the drum, and make sure the machine is placed on a sturdy and even surface.

How do I clean the washing machine to remove odors or residue buildup?

Run a cleaning cycle using a washing machine cleaner or a mixture of vinegar and baking soda. Wipe down the drum, detergent dispenser, and other interior parts regularly. Additionally, leave the lid open after each use to allow proper drying and prevent unpleasant odors.

Is the manual of the Whirlpool WTW4855HW available in English?

Yes, the manual of the Whirlpool WTW4855HW is available in English .

Is your question not listed? Ask your question here

No results