Whirlpool WRT518SZF manual

Whirlpool WRT518SZF
7.5 · 1
PDF manual
 · 56 pages
English
manualWhirlpool WRT518SZF
THANK YOU for purchasing this high-quality product. Register your new refrigerator at www.whirlpool.com. In Canada, register your
refrigerator at www.whirlpool.ca.
For future reference, please make a note of your product model and serial numbers. These can be located on the inside wall of the
refrigerator compartment.
Model Number __________________________________________________ Serial Number __________________________________________________

REFRIGERATOR

USER INSTRUCTIONS

Table of Contents/Índice/Table des matières

REFRIGERATOR SAFETY..................... 2
INSTALLATION INSTRUCTIONS .........3
Unpack the Refrigerator......................3
Location Requirements ....................... 4
Electrical Requirements....................... 4
Water Supply Requirements ...............5
Connect the Water Supply..................5
Refrigerator Doors............................... 6
Adjust the Doors.................................. 9
REFRIGERATOR USE ........................... 9
Using the Controls............................... 9
Ice Maker...........................................10
REFRIGERATOR FEATURES .............11
Refrigerator Shelves .......................... 11
Deli Drawer ........................................11
Crisper ............................................... 11
FREEZER FEATURES .........................12
Freezer Shelf......................................12
DOOR FEATURES ...............................12
Door Rails ..........................................12
REFRIGERATOR CARE....................... 12
Cleaning............................................. 12
Changing the Light Bulbs..................13
Vacation and Moving Care................ 13
TROUBLESHOOTING..........................14
ACCESSORIES ....................................15
WARRANTY..........................................16
BRAND BADGE PLACEMENT
TEMPLATE ...................... BACK COVER
SEGURIDAD DEL REFRIGERADOR .. 17
Cómo deshacerse adecuadamente
de su refrigerador viejo...................... 18
INSTRUCCIONES
DE INSTALACIÓN................................ 19
Desempaque el refrigerador.............. 19
Requisitos de ubicación .................... 19
Requisitos eléctricos ......................... 20
Requisitos del suministro de agua.... 20
Conexión del suministro de agua...... 21
Puertas del refrigerador..................... 22
Ajuste las puertas .............................. 25
USO DE SU REFRIGERADOR ............ 25
Uso de los controles.......................... 25
Fábrica de hielo ................................. 26
CARACTERÍSTICAS
DEL
REFRIGERADOR ......................... 27
Estantes del refrigerador ................... 27
Cajón para deli................................... 27
Cajón para verduras .......................... 28
CARACTERÍSTICAS
DEL
CONGELADOR ............................ 28
Estante del congelador...................... 28
CARACTERÍSTICAS DE
LA PUERTA .......................................... 29
Rieles de la puerta............................. 29
CUIDADO DE SU REFRIGERADOR... 29
Limpieza............................................. 29
Cómo cambiar los focos ................... 30
Cuidado durante las vacaciones
y mudanzas........................................ 30
SOLUCIÓN DE PROBLEMAS............. 31
ACCESORIOS ...................................... 33
GARANTÍA............................................ 34
PLANTILLA DE COLOCACIÓN
DE LA PLACA......... CONTRAPORTADA
SÉCURITÉ DU RÉFRIGÉRATEUR.............35
INSTRUCTIONS D’INSTALLATION..........37
Déballage du réfrigérateur........................37
Exigences d’emplacement.......................37
Spécifications électriques ........................38
Spécifications de l’alimentation en eau ...38
Raccordement de la canalisation d’eau...38
Portes du réfrigérateur .............................40
Ajustement des portes .............................43
UTILISATION DU RÉFRIGÉRATEUR........43
Utilisation des commandes......................43
Machine à glaçons ...................................44
CARACTÉRISTIQUES
DU
RÉFRIGÉRATEUR................................45
Tablettes du réfrigérateur.........................45
Bac à déli..................................................46
Bac à légumes..........................................46
CARACTÉRISTIQUES
DU CONGÉLATEUR ...................................47
Tablette du congélateur ...........................47
CARACTÉRISTIQUES DE LA PORTE.......47
Tringles de porte.......................................47
ENTRETIEN DU RÉFRIGÉRATEUR ..........48
Nettoyage .................................................48
Remplacement des ampoules
d’éclairage ................................................48
Entretien avant les vacances
ou lors d’un déménagement....................48
DÉPANNAGE...............................................50
ACCESSOIRES ...........................................52
GARANTIE...................................................53
GABARIT DE POSITIONNEMENT
DE L’INSIGNE DE
LA MARQUE.........COUVERTURE ARRIÈRE

W10843051A

View the manual for the Whirlpool WRT518SZF here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Whirlpool WRT518SZF or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Whirlpool WRT518SZF is a refrigerator that offers ample storage space and convenient features. With its generous capacity, this refrigerator is designed to accommodate a variety of food items, making it suitable for small to medium-sized households. Featuring a sleek and minimalist design, the WRT518SZF seamlessly blends into any kitchen decor. Its smooth and flat exterior makes it easy to clean and maintain. The refrigerator also comes with adjustable shelves, allowing users to customize the storage space according to their needs. Equipped with advanced cooling technology, the WRT518SZF ensures that your food stays fresh for longer. The refrigerator maintains a consistent temperature throughout, preserving the quality and flavor of your groceries. Additionally, it features a humidity-controlled crisper drawer, which helps to extend the lifespan of fruits and vegetables. In terms of energy efficiency, the WRT518SZF is Energy Star certified, which means it consumes less electricity, helping you save on utility bills while being environmentally friendly. The refrigerator is also designed to operate quietly, minimizing disruptive noise in your home. For added convenience, the WRT518SZF is equipped with a reversible door, allowing users to configure the refrigerator to open from either the left or right side. This feature offers flexibility in terms of placement and ensures easy access to your food items. Although specific specifications are not mentioned, the Whirlpool WRT518SZF is designed to provide reliable performance and long-lasting durability, making it a dependable choice for your refrigeration needs.

General
BrandWhirlpool
ModelWRT518SZF
Productrefrigerator
LanguageEnglish
FiletypeUse and Care Manual (PDF), Installation Guide (PDF), User manual (PDF), Datasheet (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WRT518SZF below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How do I troubleshoot if the Whirlpool WRT518SZF refrigerator is not operating?

To troubleshoot if the Whirlpool WRT518SZF refrigerator is not operating, you can follow these steps: 1. Check the electrical supply: Ensure that the refrigerator is properly connected to a grounded 3-prong outlet. Do not use an extension cord. Plug in a lamp to the outlet to verify if it is working. If there is no power, check the household fuse or circuit breaker and replace or reset if necessary. If the problem persists, contact an electrician. 2. Turn on the control: Make sure that the refrigerator control is turned on. Refer to the User Guide for instructions on using the controls. 3. Allow time for cooling: If the refrigerator is newly installed, allow 24 hours for it to cool completely. Adjusting the temperature controls to the coldest setting will not speed up the cooling process. 4. Monitor motor operation: The new refrigerator may run longer than your old one, especially in warm rooms, with a large food load, frequent door openings, or if the door has been left open. This is normal for energy-efficient refrigerators. 5. Identify normal sounds: Familiarize yourself with normal sounds of the refrigerator, such as buzzing when the water valve opens, clicking/snapping when valves open or close, pulsating as fans/compressor adjust, rattling from refrigerant flow or items on top, sizzling/gurgling during defrost cycle, popping during initial cooldown, and water running during defrost cycle. By following these troubleshooting steps, you can identify and resolve common issues that may cause the Whirlpool WRT518SZF refrigerator to not operate properly.

How do I troubleshoot if the motor of the Whirlpool WRT518SZF refrigerator is running too much?

To troubleshoot if the motor of the Whirlpool WRT518SZF refrigerator is running too much, you can follow these steps: 1. Check the temperature settings: Ensure that the temperature controls are set correctly according to your needs and the recommended settings in the User Guide. Adjust the controls if necessary. 2. Monitor the room temperature: If the room where the refrigerator is located is warm, the motor may run longer to maintain the desired temperature. Consider moving the refrigerator to a cooler location if possible. 3. Reduce the food load: If the refrigerator is heavily loaded with food, it may cause the motor to run more frequently. Remove any unnecessary items or redistribute the load to allow for better airflow. 4. Minimize door openings: Frequent door openings can increase the motor's running time. Make sure to close the refrigerator door tightly and avoid unnecessary openings. 5. Check for obstructions: Ensure that the refrigerator vents and air passages are not blocked by items placed too close to the refrigerator. Clear any obstructions to allow for proper airflow. By following these troubleshooting steps, you can identify and address potential issues that may cause the motor of the Whirlpool WRT518SZF refrigerator to run excessively.

How do I troubleshoot if the Whirlpool WRT518SZF refrigerator is making noise during operation?

To troubleshoot if the Whirlpool WRT518SZF refrigerator is making noise during operation, you can follow these steps: 1. Identify normal sounds: Familiarize yourself with the normal sounds of the refrigerator, such as buzzing when the water valve opens, clicking/snapping when valves open or close, pulsating as fans/compressor adjust, rattling from refrigerant flow or items on top, sizzling/gurgling during the defrost cycle, popping during initial cooldown, and water running during the defrost cycle. 2. Check for obstructions: Ensure that the refrigerator vents and air passages are not blocked by items placed too close to the refrigerator. Clear any obstructions to allow for proper airflow. 3. Level the refrigerator: Make sure that the refrigerator is level and stable. Use a level to check and adjust the leveling feet if necessary. 4. Check for loose parts: Inspect the refrigerator for any loose parts, such as shelves, drawers, or door bins. Tighten or reposition any loose parts to eliminate rattling or vibrating noises. 5. Contact customer support: If the noise persists and is not a normal sound, contact Whirlpool customer support for further assistance. Provide them with details about the noise and any troubleshooting steps you have already taken. By following these troubleshooting steps, you can identify and address common issues that may cause the Whirlpool WRT518SZF refrigerator to make noise during operation.

What accessories are available for the Whirlpool WRT518SZF refrigerator?

There are no specific accessories listed for the Whirlpool WRT518SZF refrigerator in the available database. It is recommended to refer to the product manual or contact Whirlpool customer support for more information on compatible accessories for this refrigerator model.

How do I troubleshoot if the door of the Whirlpool WRT518SZF refrigerator is not closing completely?

To troubleshoot if the door of the Whirlpool WRT518SZF refrigerator is not closing completely, you can follow these steps: 1. Check for obstructions: Ensure that there are no items blocking the door or preventing it from closing properly. Remove any items that may be obstructing the door. 2. Clean the door gaskets: Inspect the door gaskets for any dirt, debris, or sticky residue. Clean the gaskets using a mild detergent and warm water. Rinse and dry the gaskets thoroughly. 3. Adjust the door alignment: If the door is not aligned properly, it may not close completely. Gently lift the door and adjust its position to ensure that it is level and aligned with the refrigerator cabinet. Refer to the User Guide for instructions on adjusting the door alignment. 4. Check the door seals: Inspect the door seals for any damage or wear. If the seals are damaged or worn out, they may need to be replaced. Contact Whirlpool customer support for assistance with replacing the door seals. 5. Contact customer support: If the door still does not close properly after following these steps, contact Whirlpool customer support for further assistance. Provide them with details about the issue and any troubleshooting steps you have already taken. By following these troubleshooting steps, you can address common issues that may cause the door of the Whirlpool WRT518SZF refrigerator to not close completely.

How do I troubleshoot if the door of the Whirlpool WRT518SZF refrigerator is difficult to open?

To troubleshoot if the door of the Whirlpool WRT518SZF refrigerator is difficult to open, you can follow these steps: 1. Check for obstructions: Ensure that there are no items blocking the door or preventing it from opening smoothly. Remove any items that may be obstructing the door. 2. Clean the door gaskets: Inspect the door gaskets for any dirt, debris, or sticky residue. Clean the gaskets using a mild detergent and warm water. Rinse and dry the gaskets thoroughly. 3. Adjust the door alignment: If the door is not aligned properly, it may be difficult to open. Gently lift the door and adjust its position to ensure that it is level and aligned with the refrigerator cabinet. Refer to the User Guide for instructions on adjusting the door alignment. 4. Check the door stops: Inspect the door stops for any damage or misalignment. If the door stops are damaged or not properly positioned, they may need to be adjusted or replaced. Refer to the User Guide for instructions on removing and reinstalling the door stops. 5. Contact customer support: If the door still remains difficult to open after following these steps, contact Whirlpool customer support for further assistance. Provide them with details about the issue and any troubleshooting steps you have already taken. By following these troubleshooting steps, you can address common issues that may cause the door of the Whirlpool WRT518SZF refrigerator to be difficult to open.

How do I adjust the door of the Whirlpool WRT518SZF refrigerator?

To adjust the door of the Whirlpool WRT518SZF refrigerator, you can follow these steps: 1. Locate the adjustable rollers: The refrigerator has two adjustable rollers, one on the right and one on the left. These rollers help in adjusting the tilt of the refrigerator. 2. Turn the leveling leg: To adjust the tilt of the refrigerator, locate the leveling leg on the side that needs adjustment. Use a wrench or pliers to turn the leveling leg. Turning it to the left will raise that side of the refrigerator, while turning it to the right will lower that side. 3. Adjust the tilt: Turn the leveling leg several times to achieve the desired tilt of the refrigerator. It may take a few turns to adjust the tilt properly. Having someone push against the top of the refrigerator can make it easier to adjust. 4. Check the door closure: Open and close both doors to ensure they close easily and completely. If the doors do not close as desired, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may require several more turns to achieve the desired closure. 5. Check the level: Use a level to ensure that the refrigerator is still level from side to side. Readjust the leveling legs if necessary to achieve a level position. By following these steps, you can adjust the door of the Whirlpool WRT518SZF refrigerator to ensure proper closure and alignment.

How do I clean the gaskets of the Whirlpool WRT518SZF refrigerator?

To clean the gaskets of the Whirlpool WRT518SZF refrigerator, you can follow these steps: 1. Unplug the refrigerator or disconnect the power to ensure safety during the cleaning process. 2. Prepare a mild detergent solution by mixing a small amount of liquid dish soap with warm water. 3. Use a clean sponge or soft cloth soaked in the detergent solution to gently clean the gaskets. Avoid using abrasive or harsh cleaners, as they can damage the gaskets. 4. Pay special attention to areas where dirt, debris, or sticky residue may have accumulated. Thoroughly clean these areas using gentle scrubbing motions. 5. Rinse the gaskets with clean water to remove any soap residue. 6. Dry the gaskets thoroughly with a soft cloth to prevent moisture buildup. 7. Avoid using paper towels or scouring pads, as they can scratch or damage the gaskets. By following these steps, you can effectively clean the gaskets of the Whirlpool WRT518SZF refrigerator and maintain their optimal performance.

How do I set the temperature controls correctly on the Whirlpool WRT518SZF refrigerator?

To set the temperature controls correctly on the Whirlpool WRT518SZF refrigerator, you can follow these steps: 1. Locate the temperature control panel: The temperature control panel is located inside the refrigerator compartment. 2. Press the Setting button: Press the Setting button on the control panel to adjust the refrigerator compartment temperature. The control panel is equipped with a Smart temperature control feature. 3. Decrease the temperature: Press the Setting button to decrease the refrigerator temperature. The setting change is unidirectional, from Cold to Coldest (left to right). Each press of the button will decrease the temperature further. 4. Observe the temperature indicators: The temperature indicators on the control panel will indicate the current temperature setting. The coldest temperature setting will have all the indicators ON. The least-cold temperature setting will be shown with the first indicator ON. The recommended temperature setting will be shown with the third indicator ON. 5. Switch off the refrigeration system (optional): If you need to switch off the refrigeration system, press the Setting button for 4 seconds and then release it. No indicator will remain on. This will stop the cooling process, but the electricity will not be disconnected. By following these steps, you can set the temperature controls correctly on the Whirlpool WRT518SZF refrigerator and adjust the refrigerator compartment temperature as needed.

How do I troubleshoot if the temperature of the Whirlpool WRT518SZF refrigerator is too warm?

To troubleshoot if the temperature of the Whirlpool WRT518SZF refrigerator is too warm, you can follow these steps: 1. Check the temperature settings: Ensure that the temperature controls are set correctly according to your needs and the recommended settings in the User Guide. Adjust the controls if necessary. 2. Allow time for cooling: If the refrigerator is newly installed or if the door has been left open for an extended period, it may take some time for the refrigerator to cool down to the desired temperature. Allow at least 24 hours for the refrigerator to reach the optimal temperature. 3. Check for heavy ice use or hot room temperature: If the freezer section is too cold or the room temperature is too hot, it can affect the overall temperature of the refrigerator. Adjust the airflow or refrigerator control settings accordingly. 4. Minimize the quantity of groceries: If the refrigerator is heavily loaded with groceries, it can impact the cooling performance. Remove any unnecessary items or redistribute the load to allow for better airflow. 5. Adjust the refrigerator tilt: If the doors do not close properly or if they are difficult to open, adjusting the refrigerator's tilt can help improve the temperature control. Follow the instructions in the User Guide to adjust the tilt using the adjustable rollers. By following these troubleshooting steps, you can address common issues that may cause the temperature of the Whirlpool WRT518SZF refrigerator to be too warm.

What are the common issues with the ice maker of the Whirlpool WRT518SZF refrigerator?

Common issues with the ice maker of the Whirlpool WRT518SZF refrigerator include: 1. No ice production or insufficient ice: - Ensure that the ice maker is connected to a water supply and the water shut-off valve is fully open. - Straighten any kinks in the water source line. - Make sure the ice maker wire shut-off arm or switch is in the on position. - Allow 24 hours for ice production to begin after installation, and 3 days for full ice production. - Remove any ice cubes jammed in the ice maker ejector arm with a plastic utensil. - Check if a reverse osmosis water filtration system connected to the cold water supply is affecting water pressure. 2. Hollow or small ice cubes: - Ensure that the water shut-off valve is fully open. - Straighten any kinks in the water source line. - Check if a reverse osmosis water filtration system connected to the cold water supply is affecting water pressure. 3. Off-taste, odor, or gray color in the ice: - If new plumbing connections have been made, discard the ice and wash the ice storage bin. Allow 24 hours for the ice maker to make new ice and discard the first three batches. - Discard ice that has been stored for too long and wash the ice bin. - Use airtight, moisture-proof packaging to store food to prevent food odor from transferring to the ice. By addressing these common issues, you can troubleshoot and resolve problems with the ice maker of the Whirlpool WRT518SZF refrigerator.

How do I troubleshoot if the ice maker of the Whirlpool WRT518SZF refrigerator is not producing enough ice?

Common issues with the ice maker of the Whirlpool WRT518SZF refrigerator include: 1. Insufficient water supply: - Ensure that the water shut-off valve is fully open and the water line is not kinked or blocked. - Check for low water pressure, which can affect ice production. If necessary, contact a plumber to address any water pressure issues. 2. Freezer temperature too high: - Verify that the freezer temperature is set to the recommended setting. Adjust the temperature if needed. - Ensure that the freezer compartment is not overloaded with food, as this can restrict airflow and affect ice production. 3. Ice maker wire shut-off arm or switch in the wrong position: - Make sure the ice maker wire shut-off arm or switch is in the down/on position. If it is raised or turned off, the ice maker will not produce ice. 4. Ice cubes jammed in the ice maker: - Check for any ice cubes that may be stuck in the ice maker ejector arm. Remove any obstructions using a plastic utensil. 5. Water filter needs replacement: - If your refrigerator is equipped with a water filter, check if it needs to be replaced. A clogged or expired filter can restrict water flow to the ice maker. By troubleshooting these common issues, you can address problems with the ice maker of the Whirlpool WRT518SZF refrigerator and ensure proper ice production.

How do I troubleshoot if the ice maker of the Whirlpool WRT518SZF refrigerator is producing hollow or small ice cubes?

To troubleshoot if the ice maker of the Whirlpool WRT518SZF refrigerator is producing hollow or small ice cubes, you can follow these steps: 1. Check the water supply: Ensure that the water shut-off valve is fully open and the water line is not kinked or blocked. Low water pressure can result in small or hollow ice cubes. 2. Verify the freezer temperature: Make sure the freezer temperature is set to the recommended setting. Adjust the temperature if needed. A freezer temperature that is too high can affect ice production. 3. Inspect the water filter: If your refrigerator is equipped with a water filter, check if it needs to be replaced. A clogged or expired filter can restrict water flow to the ice maker and affect ice cube formation. 4. Clear any ice cube obstructions: Check for any ice cubes that may be stuck in the ice maker or dispenser chute. Remove any obstructions using a plastic utensil. 5. Contact customer support: If the issue persists after following these steps, contact Whirlpool customer support for further assistance. Provide them with details about the issue and any troubleshooting steps you have already taken. By troubleshooting these common issues, you can address problems with the ice maker of the Whirlpool WRT518SZF refrigerator and improve the quality of the ice cubes produced.

What are the water supply requirements for the ice maker of the Whirlpool WRT518SZF refrigerator?

The water supply requirements for the ice maker of the Whirlpool WRT518SZF refrigerator are as follows: 1. Water Pressure: A cold potable water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required for the ice maker to operate properly. If the water pressure is lower than the recommended range, it may result in hollow or irregularly shaped ice cubes. 2. Water Source: The refrigerator should be connected to a cold water supply. Ensure that the water shut-off valve is fully open and the water line is not kinked or blocked. 3. Water Filtration System: If a reverse osmosis water filtration system is connected to the cold water supply, the water pressure to the system should be a minimum of 40 to 60 psi (276 to 414 kPa) for optimal ice maker performance. 4. Copper Tubing: It is recommended to use copper tubing for the water supply line. Copper tubing should be installed in areas where the household temperatures will remain above freezing. 5. Water Filter: If the refrigerator is equipped with a water filter, it is important to check and replace the filter as recommended to ensure proper water flow and ice quality. By meeting these water supply requirements, you can ensure the optimal performance of the ice maker in the Whirlpool WRT518SZF refrigerator.

Is the manual of the Whirlpool WRT518SZF available in English?

Yes, the manual of the Whirlpool WRT518SZF is available in English .

Is your question not listed? Ask your question here

No results