Whirlpool WRS325SDHZ manual

Whirlpool WRS325SDHZ
9.3 · 3
PDF manual
 · 64 pages
English
manualWhirlpool WRS325SDHZ
47
Pour mettre en marche la machine à glaçons, ouvrir la porte
de la machine à glaçons en la soulevant et déplacer le
commutateur ON/OFF (marche/arrêt) vers la position ON
(marche) (droite).
Pour désactiver la machine à glaçons manuellement, ouvrir la
porte de la machine à glaçons en la soulevant et déplacer le
commutateur ON/OFF 9marche/arrêt) vers la position OFF
(arrêt) (O).
REMARQUE : La machine à glaçons comporte un système
d’arrêt automatique pour éviter le surremplissage du bac
d’entreposage pendant un fonctionnement normal. Au fur et à
mesure de la production, les glaçons remplissent le bac
d’entreposage. Les glaçons soulèvent le bras métallique de
commande d’arrêt. Lorsque le bac d’entreposage est plein, la
machine à glaçons arrête automatiquement la production de
glaçons, mais le commutateur ON/OFF (marche/arrêt) reste à la
position ON (marche) (I). Ne pas forcer le bras de commande à
broche métallique vers le haut ou vers le bas.
Retrait et réinstallation du bac d’entreposage des glaçons :
1. Tirer le panneau par le bas.
2. Déplacer l’interrupteur à bascule ON/OFF (marche/arrêt) à la
position de OFF (arrêt) (O).
3. Soulever l’avant du bac d’entreposage et le retirer.
4. Replacer le bac à glaçons en le poussant complètement sans
quoi le distributeur ne fonctionnera pas.
5. Pour relancer la production de glaçons, déplacer l’interrupteur
à bascule ON/OFF (marche/arrêt) à la position de ON
(marche) (I).

Système de filtration de l’eau

Ne pas utiliser ce produit pour filtrer une eau microbiologiquement
polluée ou de qualité inconnue en l’absence d’un dispositif de
désinfection adéquat en amont ou en aval du système. Les
systèmes certifiés pour la réduction des kystes peuvent être
utilisés pour une eau désinfectée susceptible de contenir des
kystes filtrables.

Témoin lumineux de l’état du filtre à eau

Le témoin lumineux de l’état du filtre à eau vous aidera à savoir
quand changer le filtre à eau. Il est situé dans le tableau de
commande du réfrigérateur. Pour commander un filtre à eau de
remplacement, utiliser le numéro de pièce W10295370A
(P4RFWB).
Style 1 État de commande et de remplacement :
Lorsque l’affichage du témoin du filtre à eau sur le tableau de
commande passe à « Order » (commander), ceci indique qu’il
est presque temps de changer la cartouche du filtre à eau.
Remplacer la cartouche du filtre à eau lorsque l’affichage de
l’état du filtre passe à « Replace » (changer).
REMARQUE : Si le débit d’eau au distributeur d’eau ou à la
machine à glaçons diminue de façon marquée, remplacer le
filtre plus tôt. Le filtre doit être remplacé au moins tous les 6
mois selon la qualité de l’eau et l’utilisation.
Style 2 État témoin rouge :
Lorsque le témoin devient rouge sur le tableau de commande,
ceci indique qu’il est temps de changer la cartouche du filtre à
eau.
Il est recommandé de remplacer le filtre lorsque le témoin
lumineux de l’état du filtre passe au rouge ou lorsque le débit
d’eau au distributeur ou à la machine à glaçons diminue de
façon marquée.
REMARQUE : Le filtre doit être remplacé au moins tous les 6
mois selon la qualité de l’eau et l’utilisation.
Réinitialisation de l’état du filtre
Après avoir changé le filtre à eau, régler de nouveau le témoin
lumineux de l’état du filtre à eau.
Pour les modèles avec un bouton d’options :
Appuyer sur le bouton Options pour accéder au mode Options,
puis appuyer sur Lock (verrouillage) pour réinitialiser le
témoin, et ensuite appuyer sur Measured Fill (remplissage
mesuré) pour confirmer qu’on souhaite réinitialiser le témoin.
Une fois le système réinitialisé, les icônes « Order »
(commander) et « Replace » (remplacer) disparaissent de
l’écran d’affichage.
Pour les modèles avec un bouton Filter (filtre) :
Appuyer sur le bouton Filter (filtre) pendant 3 secondes pour
réinitialiser le témoin d’état. Une fois le système réinitialisé, les
icônes « Order » (commander) et « Replace » (remplacer)
disparaissent de l’écran d’affichage.
Pour les modèles avec un bouton Temp Setting (réglage
de la température) :
Le bouton de réinitialisation se trouve sur le tableau de
commande du compartiment de réfrigération. Pour réinitialiser
le témoin après avoir changé le filtre, appuyer sur Temp
Setting (réglage de la température) en moins de 3 secondes.
Le témoin lumineux passera du rouge pour s’éteindre dès que
le système sera réinitialisé.
Pour les modèles avec des boutons Light (lampe) et Ice
Type (type de glaçons) :
Réinitialiser le témoin lumineux de l’état du filtre en appuyant
sur les boutons Light (lampe) et Ice Type (type de glaçons)
pendant 3 secondes. Le témoin lumineux s’éteint lorsque le
système est réinitialisé.

Remplacement du filtre à eau

Style 1 Coin supérieur droit :
1. Repérer le filtre à eau situé dans le coin supérieur droit du
compartiment de réfrigération.
2. Ouvrir la porte du couvercle du filtre en la soulevant. Le filtre
est libéré, puis éjecté lors de l’ouverture de la porte.
3. Une fois la porte complètement ouverte, retirer le filtre en le
tirant en ligne droite.
REMARQUE : Il y aura peut-être de l’eau dans le filtre. Il est
possible qu’il y ait un dégât d’eau. Utiliser une serviette pour
essuyer tout renversement.
4. Sortir le filtre neuf de son emballage et retirer le couvercle.
S’assurer que les joints toriques sont toujours en place une
fois le couvercle retiré.

View the manual for the Whirlpool WRS325SDHZ here, for free. This manual comes under the category refrigerators and has been rated by 3 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Whirlpool WRS325SDHZ or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 56
T
Trichel VaheyApril 18, 2023

The freezer door will not close tightly. It looks like it’s too tight on the hinge side but cannot understand how to align it. The refrigerator side door closes firmly

The freezer door will not close tightly. It looks like it’s too tight on the hinge side but cannot understand how to align it...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

To adjust the freezer door on the Whirlpool WRS325SDHZ refrigerator, please follow these steps: 1. Open both doors of the refrigerator. 2. Check the levelness of the floor where the rear side of the refrigerator will rest. If the refrigerator is not leveled, adjust or add shims on the flooring to create a leveled floor for the rear side wheels. A leveled rear side prevents the refrigerator cabinet from forming a twist. 3. Use a bubble level to check the levelness of the refrigerator. Place the bubble level on top of the refrigerator or on its side to ensure it is level. 4. Use a 3/8" nut driver to turn the leveling screws located on both sides of the refrigerator. Depending on the uneven floor conditions, you may need to turn one or both screws to the right or left several times to raise or lower the refrigerator. 5. Close both doors and check that they close easily. If not, turn both screws to the right to raise the refrigerator by tilting it more to the back until the doors close easily.

This answer is automatically generated
D
Denise MetcalfMay 26, 2024

The temperature settings bars including the check marks have been illuminated since I’ve had the refrigerator which I purchased in April. While cleaning the screen the check marks no longer appear and the bars go off after a few months minutes. Is this normal?

S
Samantha h.May 14, 2024

My fridge and freezer are no longer getting cold. It's not even a month old. Everything is getting soggy . Who do I call?

L
L SHERWOODOctober 16, 2023

There is a red light that shows H2O but I cannot find what or where I am to look for place to correct.

There is a red light that shows H2O but I cannot find what or where I am to look for place to correct.
zoom-in
View photo
1 comment
D
DIANNA BAILEYJanuary 28, 2024

@L SHERWOOD

A
Annette C. WlliamsFebruary 7, 2023

There is a red light that shows H2O but I cannot find what or where I am to look for place to correct.

1 comment
F
Felix Bruno October 26, 2023

Where do u press to turn the reset for the filter light off

M
Maggie May 10, 2023

There is a red light that shows H2O but I cannot find what or where I am to look for

1 comment
J
JoshApril 17, 2024

@Maggie This means the water filter should be replaced. It is timer-based, so you can reset the timer by holding the "Light" and "Ice type" buttons for a few seconds.

J
JohnJuly 22, 2023

I accidentally got the parts of the drawers mixed up what page do I find to reinstall the drawers back in place

T
Tom TrippJuly 27, 2023

Just received delivery of WR325SDHZ08 side-by-side refrigerator. In the last hour the interior has only gotten 4 degrees (F) cooler. Is this normal or should I worry?

T
TomAugust 11, 2023

The top light bulb in my wrs325sdhz08 freezer is not working. Can it be replaced and if so, how is it done

S
SamirSeptember 18, 2023

Coloque la temperatura del refrigerador lo menos Frio y aún sigue congelando mis artículos frescos. Que debo hacer?

The Whirlpool WRS325SDHZ is a refrigerator that offers ample storage space and reliable performance. With its spacious 24.6 cubic feet capacity, you can easily store all your groceries and beverages. The refrigerator features adjustable glass shelves, allowing you to customize the layout to suit your needs and accommodate larger items. It also has adjustable gallon door bins, providing convenient storage for milk jugs and other large containers. The WRS325SDHZ includes two humidity-controlled crispers, designed to keep your fruits and vegetables fresh for longer. It also features a temperature-controlled full-width drawer, which is ideal for storing deli meats and cheeses. The refrigerator is equipped with LED interior lighting, ensuring that the contents are well-illuminated, making it easy to find what you need. In terms of functionality, the WRS325SDHZ features a through-the-door ice and water dispenser, providing chilled water and ice cubes on demand. The dispenser also includes a water filter, ensuring that you have clean and fresh-tasting water. In terms of design, the refrigerator has a sleek stainless steel exterior, adding a touch of modernity to your kitchen. It features a fingerprint-resistant finish, keeping the appliance looking clean and polished. With its Energy Star certification, the WRS325SDHZ is designed to be energy-efficient, helping you to conserve electricity and reduce your utility bills. In summary, the Whirlpool WRS325SDHZ is a spacious and reliable refrigerator, offering customizable storage options, advanced features such as an ice and water dispenser, and a sleek design.

General
BrandWhirlpool
ModelWRS325SDHZ | WRS325SDHZ
Productrefrigerator
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Quickstart Guide (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WRS325SDHZ below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

Why is my refrigerator not cooling properly?

There could be various reasons for this issue, such as a dirty condenser coil, improper temperature settings, or a faulty temperature control. Troubleshooting these areas can help resolve the cooling problem.

What should I do if my refrigerator is making strange noises?

Unusual noises coming from your refrigerator could indicate a faulty fan motor, a clogged drain, or even a loose component. Inspecting and potentially repairing these areas can help eliminate the noises.

How can I prevent frost buildup in my freezer?

Frost buildup can occur due to a damaged door gasket, frequent door openings, or improper temperature settings. Checking and replacing the gasket if needed, minimizing door openings, and adjusting the temperature can help prevent frost accumulation.

How do I resolve ice dispenser issues?

If your ice dispenser is not working correctly, it might be due to a clogged water line, an improperly installed water filter, or a faulty dispenser motor. Checking and addressing these potential issues can restore the ice dispenser's functionality.

Why is water leaking from my refrigerator?

Water leakage can be caused by a blocked defrost drain, a cracked water inlet valve, or a faulty water filter. Investigating and resolving these issues can help stop the water leakage and maintain a properly functioning refrigerator.

Is the manual of the Whirlpool WRS325SDHZ available in English?

Yes, the manual of the Whirlpool WRS325SDHZ is available in English .

Is your question not listed? Ask your question here

No results