View the manual for the Whirlpool WRF560SEHZ here, for free. This manual comes under the category refrigerators and has been rated by 6 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Whirlpool WRF560SEHZ or do you need help? Ask your question here

The Whirlpool WRF560SEHZ is a refrigerator that is known for its spacious interior and energy efficiency. With a total capacity of 19.7 cubic feet, it provides ample storage space for all your groceries and essentials. The interior features adjustable shelves, humidity-controlled crispers, and a deli drawer, allowing for customized organization and easy access. This refrigerator also boasts an advanced temperature management system that ensures your food stays fresh for longer periods of time. The Accu-Chill Temperature Management System regulates the interior temperature, while the FreshFlow Air Filter minimizes odors and reduces food spoilage. Energy Star rated, the Whirlpool WRF560SEHZ is designed to save energy and lower your utility bills. Its Adaptive Defrost system ensures frost-free operation, preventing ice buildup and maximizing efficiency. The exterior features a sleek and modern design, with a fingerprint-resistant finish that easily wipes clean. If you are in need of a reliable and energy-efficient refrigerator that can store all your groceries and keep them fresh for longer, the Whirlpool WRF560SEHZ is an excellent choice. Its advanced temperature management system, spacious interior, and energy-saving features make it a practical and convenient addition to any modern kitchen.
| Brand | Whirlpool |
| Model | WRF560SEHZ |
| Product | refrigerator |
| Language | English |
| Filetype | User manual (PDF), Quickstart Guide (PDF), Datasheet (PDF), Warranty information (PDF), Energy label (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WRF560SEHZ below.
There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?
A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.
A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
One possible reason for inadequate cooling could be that the temperature settings are not set correctly. Make sure the refrigerator is set to a suitable temperature (around 37°F or 3°C) and the freezer is set to around 0°F or -18°C).
First, check if the ice maker is switched on. Then verify that the water supply to the refrigerator is connected and turned on. Additionally, examine if the ice maker bin is empty and ensure it is properly installed and level.
Excessive frost accumulation may indicate a problem with the freezer door seal. Inspect the gasket for any damage or gaps and make sure it is clean and properly sealed all around the door. Additionally, avoid leaving the freezer door open for extended periods and ensure a tight seal when closing it.
To replace the water filter, locate the filter compartment inside the refrigerator, typically at the top right corner. Turn the filter counterclockwise and pull it out. Insert the new filter, aligning the arrow with the unlock symbol, and twist it clockwise to secure it in place. Remember to run a few gallons of water through the dispenser to flush out air or carbon fines.
Various factors can contribute to excessive refrigerator noise. Start by checking if the refrigerator is properly leveled, as uneven leveling can cause vibrations and noise. Also, ensure that the refrigerator is not touching any nearby walls or cabinets, as this can create rattling sounds. Additionally, verify that the condenser fan is clean and operational, as a dirty or faulty fan can generate loud noises.
Yes, the manual of the Whirlpool WRF560SEHZ is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Whirlpool and is the answer not in the manual?
Question and answer
Number of questions: 57Hi, the right side door (non-water dispenser) on the French door is not closing properly on WRF560SEHZ00 model. A plastic piece on the bottom hinge has broken off and I think needs to be replaced. What is the model# to reorder replacement? Thank you.
2 comments
The model number for the replacement plastic piece for the bottom hinge of the right side door on the WRF560SEHZ00 refrigerator is not provided.
This answer is automatically generatedSame problem. The gray plastic piece keeps the cam inside from slipping around. Supposedly this all happens because you have work down the cam. Replacement part: WPW10470155 Whirlpool Refrigerator Door Closing Cam However there’s no replacement for the grey plastic part. You might have to stick a metal washer on top of the cam to get it to stop wiggling around. I just ordered the part.
The back cooling thingy is frosted up and the unit is making a loud humming sound. What do I do?
2 comments
To address the issue of the cooling element at the back being covered in frost and the refrigerator producing a loud humming noise, follow these steps: 1. Check the temperature settings: Make sure that the temperature settings are appropriate for the refrigerator. The recommended temperature for the refrigerator compartment is between 35°F and 38°F (2°C and 3°C). 2. Clear the frost buildup: If the cooling element at the back is covered in frost, it may be affecting the refrigerator's performance. Turn off the refrigerator and allow the frost to melt naturally. Once the frost has melted, clean the cooling element with a soft cloth or sponge. 3. Check the door seals: Inspect the door seals for any damage or gaps. Damaged or faulty door seals can lead to frost buildup and inefficient cooling. If you notice any issues with the door seals, contact customer service for assistance. 4. Ensure proper ventilation: Make sure that the refrigerator has enough space around it for proper ventilation. Clear any obstructions that may be blocking the airflow to the cooling element. 5. Check for any loose components: A loud humming noise could be caused by loose components or vibrations. Carefully inspect the refrigerator for any loose parts or panels. If you find any, tighten or secure them as necessary. 6. Level the refrigerator: Make sure that the refrigerator is level and stable. Use a level tool to check if the refrigerator is balanced. If it is not level, adjust the leveling feet or wheels to achieve stability.
This answer is automatically generatedThe defrost cycle is not activating. There is ice build up around the fan hidden in the back of the freezer compartment, and the rotating fan is hitting this ice build up, causing the noise. I just had this happen on mine and I'm trying to figure out the cause and fix. Could be fuse, heater, defrost timer, thermostat, or control board.
We just bought model wrf560sehz03 and can’t locate where to place the produce preserver and the air filter.
1 comment
To find where to put the produce preserver and the air filter in the Whirlpool WRF560SEHZ refrigerator, follow these steps: 1. Air Filter: - The disposable air filter should be replaced every 6 months or when the status indicator air filter icon turns on and starts flashing when the refrigerator door is opened. - Remove the used air filter by squeezing in on the side tabs. - Install the new air filter and status indicator using the instructions provided. 2. Produce Preserver: - Your refrigerator's accessory packet includes a Produce Preserver, which should be installed prior to use. - The Produce Preserver absorbs ethylene, allowing the ripening process of many produce items to slow down and stay fresh longer. - Install the Produce Preserver according to the instructions provided. - There are two styles for installing the Produce Preserver: - Style 1 (Located Inside the Refrigerator): - Find the Produce Preserver housing inside the refrigerator. - Lift up on the housing to remove it from the mounting tab. - Open the housing by pulling up and out on the back of the top of the housing. - Place the Produce Preserver pouches into the housing and snap the housing back together. - Adhere the Produce Preserver housing to the back wall of the crisper drawer according to the instructions included in the package. - Place the housing back on the mounting tab. - Style 2 (Located in Crisper or Refrigerator Drawers): - Wash the interior of a drawer with a solution of mild dish soap and warm water, and dry thoroughly. - Find the package containing the Produce Preserver inside the refrigerator and install the Produce Preserver into the drawer according to the instructions provided. - Install the status indicator by placing it facedown on a firm, flat surface and applying pressure to the bubble on the back of the indicator until it pops. - Slide open the cap on the Produce Preserver housing and place the indicator in the top of the housing, facing outward. - Slide the cap closed and check that the indicator is visible through the rectangular hole in the cap.
This answer is automatically generatedhow to remove the bottom freezer drawer? Whirlpool Wrf560sehz Drawer glide will not fully retract. Center glide on left side remains extended by about 3/4 inch.
1 comment
To remove the bottom freezer drawer of the Whirlpool WRF560SEHZ refrigerator, follow these steps: 1. Pull out the drawer glides until they are fully extended. 2. Depending on the style of your drawer, follow one of the following methods: - Style 1: Bottom Release Lever - Push up on the lever at the bottom of the drawer glide bracket to open it. - Insert the drawer front bracket into the drawer glide bracket and release the lever. - Style 2: Bottom Screws - Lower the loosened screws in the top of the door front into the upper notches in the drawer glide. - Align the holes in the bottom of the drawer glides. - Replace the two screws removed previously and tighten all four screws. 3. Reconnect the wiring, if applicable. 4. Replace the drawer bins onto the drawer glides.
This answer is automatically generatedWhere are the filters located and how do I change the?
1 comment
The filters for the Whirlpool WRF560SEHZ refrigerator are located in two different styles. Style 1 - Located on the left side at the bottom of the refrigerator: 1. Push on the water filter door located in the lower left corner of the refrigerator to open it. 2. Rotate the water filter and turn it counterclockwise by 90 degrees to unlock it. 3. Remove the filter from the compartment. 4. Remove the water filter cap. 5. Install the water filter cap on the new filter, aligning the arrows and the grooves correctly. 6. Place the filter back into the compartment. 7. Rotate the water filter and turn it clockwise by 90 degrees to lock it in place and align the arrows. 8. Close the water filter door. Style 2 - Located on the right side at the top of the refrigerator: 1. Identify the accessories packet inside the refrigerator and remove the water filter. 2. Take the water filter out of its packaging and remove the cover from the O-rings. Make sure the O-rings are still in place after the cover is removed.
This answer is automatically generatedMy icemaker was not connected the day my refrigerator was installed. When I connected the water source ,the next day it didn't make ice. I found a notice on the icemaker saying it should be turned off if water supply is not connected immediately, but it wasn't. (It was installed by the place I purchased it). What to do?
The refrigerator is not cooling, while the freezer is still working. I have replaced the fridge filter hoping that might work, but unfortunately it did not. Any ideas?
1 comment
@Susan it means the fan motar that's is supposed to pump cold air from the freezer to the refrigerator is busted. I have the same problem. I'm in the middle of that repair myself, because the technician wanted $550 to replace a $50 part.
What do the indicator lights mean and how are the buttons used? Are the lights supposed to be on all the time?