Whirlpool WRF535SWHV manual

Whirlpool WRF535SWHV
8.6 · 1
PDF manual
 · 64 pages
English
manualWhirlpool WRF535SWHV

W11468670D

W11468676D-SP

FRENCH DOOR BOTTOM MOUNT OWNER'S

MANUAL

MANUEL D’UTILISATION DE RÉFRIGÉRATEUR À

PORTE À DOUBLE BATTANT ET CONGÉLATEUR EN

BAS

Table of Contents/Table des matières

REFRIGERATOR SAFETY.................................................2
Refrigerator Safety .........................................................2
REFRIGERATOR CARE ....................................................3
Cleaning ......................................................................3
Changing the LED Module ...............................................5
Refrigerator Shelves.......................................................5
Opening and Closing Doors .............................................6
Vacation and Moving Care ...............................................6
INSTALLATION INSTRUCTIONS ........................................7
Unpack the Refrigerator ..................................................7
Location Requirements ...................................................8
Electrical Requirements ..................................................8
Water Supply Requirements.............................................8
Connect the Water Supply ...............................................9
Complete the Installation ............................................... 11
Install Air Filter (on some models).................................... 11
Install Produce Preserver (on some models) ...................... 13
REFRIGERATOR FEATURES........................................... 14
Crisper Humidity Control (on some models) ....................... 14
Water and Ice Dispensers (on some models) ..................... 14
Ice Maker and Storage Bin............................................. 14
Water Filtration System ................................................. 16
DOOR AND HANDLE INSTRUCTIONS .............................. 18
Door and Drawers........................................................ 18
Remove and Replace Handles........................................ 18
Remove Refrigerator Doors and Hinges............................ 20
Reset Bottom Refrigerator Door Hinge ............................. 21
Replace Refrigerator Doors and Hinges............................ 22
Remove and Replace Refrigerator Drawer ........................ 22
Door Closing and Alignment........................................... 24
PERFORMANCE DATA SHEET ........................................ 28
Performance Data Sheet ............................................... 28
SÉCURITÉ DU RÉFRIGÉRATEUR .................................... 30
Sécurité du Réfrigérateur............................................... 30
ENTRETIEN DU RÉFRIGÉRATEUR................................... 31
Nettoyage .................................................................. 31
Remplacer le module à DEL........................................... 33
Tablettes du réfrigérateur............................................... 33
Ouverture et fermeture des portes ................................... 34
Précautions à prendre avant les vacances ou le
déménagement ........................................................... 35
INSTRUCTIONS D’INSTALLATION ................................... 36
Déballage du réfrigérateur ............................................. 36
Exigences d’emplacement ............................................. 36
Spécifications électriques .............................................. 37
Spécifications de l’alimentation en eau ............................. 37
Raccordement à la canalisation d’eau .............................. 38
Terminer l’installation .................................................... 41
Installer le filtre à air (sur certains modèles) ....................... 41
Installation du conservateur de produits frais (sur certains
modèles).................................................................... 43
CARACTÉRISTIQUES DU RÉFRIGÉRATEUR..................... 44
Commande d’humidité dans le bac à légumes (sur certains
modèles).................................................................... 44
Distributeur d’eau et de glaçons (sur certains modèles)........ 44
Machine à glaçons et bac d’entreposage........................... 45
Système de filtration de l’eau.......................................... 47
INSTRUCTIONS POUR LA PORTE ET LA POIGNÉE............ 49
Porte et tiroirs ............................................................. 49
Pour enlever et réinstaller les poignées............................. 49
Démontage des portes et charnières du réfrigérateur........... 51
Réinitialiser la charnière inférieure du réfrigérateur.............. 53
Réinstallation des portes et charnières ............................. 54
Retrait et réinstallation du tiroir de congélation ................... 54
Fermeture et alignement des portes................................. 56
Fiche de données de performance................................... 60
FICHE DE DONNÉES DE PERFORMANCE.............................. 60

View the manual for the Whirlpool WRF535SWHV here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Whirlpool WRF535SWHV or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
G
Gisela Griego November 30, 2023

How to program the temperature on my Whirlpool refrigerator model WRF535SWHV01? It has two dials (-,-) and I don't understand why it is like this.

How to program the temperature on my Whirlpool refrigerator model WRF535SWHV01? It has two dials (-,-) and I don't understand...
zoom-in
View photo
This message has been automatically translated
J
John GilchristMay 22, 2021

Looking for the door alarm indicator and switch, not where the manual says it is. Model # WRF535SWHY-03/ Ser. #KX5017158

Looking for the door alarm indicator and switch, not where the manual says it is. Model # WRF535SWHY-03/ Ser. #KX5017158
zoom-in
View photo
F
FredDecember 22, 2022

Refrigerator lights not working

The Whirlpool WRF535SWHV is a refrigerator that offers a sleek and modern design. It has a black stainless steel finish that is both fingerprint-resistant and easy to clean. With a total capacity of 25 cubic feet, this refrigerator is designed to meet the needs of a family. The interior of the fridge has LED lighting that illuminates all areas, giving clear visibility of the contents. The Whirlpool WRF535SWHV has a number of features that make it an excellent choice for a modern household. It includes spill-proof glass shelves that are adjustable and easy to clean, ensuring maximum storage and space efficiency. It also has humidity-controlled crispers that keep fruits and vegetables fresher for longer. This refrigerator is equipped with an external ice and water dispenser that allows for easy access to chilled, filtered water and ice. It also has a factory-installed ice maker that produces up to 3.3 pounds of ice per day. The fridge is Energy Star certified, meaning it is eco-friendly and energy efficient. The dimensions of the Whirlpool WRF535SWHV are 35.63 inches in width, 70 inches in height, and 35.5 inches in depth. It also has a temperature management system that ensures optimal temperature and humidity levels throughout the fridge. Overall, this refrigerator is a great choice for anyone looking for a modern and efficient fridge with ample storage space and useful features.

General
BrandWhirlpool
ModelWRF535SWHV
Productrefrigerator
LanguageEnglish
FiletypeUser manual (PDF), Use and Care Manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Datasheet (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WRF535SWHV below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How do I troubleshoot if the ice storage bin in the Whirlpool WRF535SWHV refrigerator is not coming out?

To troubleshoot if the ice storage bin in the Whirlpool WRF535SWHV refrigerator is not coming out, follow these steps: 1. Check the position of the auger driver: Behind the ice bin, there is an auger driver that needs to be properly aligned with the ice bin. Turn the auger driver counterclockwise to align it with the ice bin. 2. Ensure the ice bin is locked in place: The ice storage bin must be locked in place for proper ice dispensing. Push the ice bin into the guide rails located on either side of the enclosure until you feel resistance. Raise the front slightly and push the ice bin in until you hear an audible "click". 3. Release the ice storage bin latch: To remove the ice storage bin, insert your fingers into the hole at the base of the bin and squeeze the latch to release the bin from the compartment. Lift the storage bin up and pull it straight out. 4. Reinstall the ice storage bin: To replace the storage bin, insert it back into the ice compartment and push down firmly to ensure it is securely in place. By following these steps, you should be able to troubleshoot and resolve the issue if the ice storage bin is not coming out in the Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the ice dispenser is not working properly in the Whirlpool WRF535SWHV refrigerator?

To troubleshoot if the ice dispenser is not working properly in the Whirlpool WRF535SWHV refrigerator, follow these steps: 1. Check the water pressure: Ensure that the water pressure to the refrigerator meets the minimum requirement. Dispense 1 cup of water and observe the time it takes to dispense. If it takes longer than 8 seconds, the water pressure may be lower than recommended. 2. Clean the ice dispenser chute: Humidity can cause ice to clump together, leading to blockage in the ice dispenser chute. Regularly empty the ice storage bin and clean the ice delivery chute, the ice storage bin, and the area beneath the storage bin every 2 weeks. Use a plastic utensil to remove any ice clogging the storage bin and delivery chute. Clean the ice delivery chute and the bottom of the ice storage bin using a warm, damp cloth and dry thoroughly. 3. Check the ice maker and storage bin: Flush the water system before turning on the ice maker. Allow 24 hours for the first batch of ice to be produced and 2 to 3 days to fill the ice storage bin. Ensure that the water supplied to the ice maker is of good quality and not connected to a softened water supply. 4. Break up clumped ice: If the ice in the storage bin clumps together, use a plastic utensil to break it up. Avoid using anything sharp that could damage the ice bin and dispenser mechanism. By following these steps, you should be able to troubleshoot and resolve issues with the ice dispenser in the Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the water filtration system in the Whirlpool WRF535SWHV refrigerator is not filtering the water effectively?

To troubleshoot if the water filtration system in the Whirlpool WRF535SWHV refrigerator is not filtering the water effectively, follow these steps: 1. Check the water filter installation: Ensure that the water filter is properly installed and aligned. Remove the water filter and reinsert it, making sure to align the arrows on the filter with the grooves in the filter cap. Twist the filter 90° clockwise until it locks into place. 2. Verify the water filter compartment: Locate the water filter compartment in the refrigerator. Depending on the style, it may be on the left-hand side or the top-right corner of the refrigerator ceiling. Open the compartment door and check if the filter is securely in place. 3. Flush the water system: After installing or replacing the water filter, it is important to flush the water system to remove any air or impurities. Follow the instructions in the manual to flush the water system properly. 4. Check the water supply: Ensure that the refrigerator is properly connected to a water supply with adequate water pressure. Verify that the water supply valve is fully open and that there are no kinks or blockages in the water line. By following these steps, you should be able to troubleshoot and resolve issues with the water filtration system in the Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the vacation mode feature in the Whirlpool WRF535SWHV refrigerator is not activating?

To troubleshoot if the vacation mode feature in the Whirlpool WRF535SWHV refrigerator is not activating, follow these steps: 1. Check the refrigerator model: Ensure that your Whirlpool WRF535SWHV refrigerator has the vacation mode feature. Refer to the product specifications or the "Quick Start Guide" in the manual to confirm if your model supports this feature. 2. Activate vacation mode: To activate vacation mode, follow the instructions provided in the "Quick Start Guide" section of the manual. Typically, you need to locate the vacation mode button or setting on the control panel and press and hold it for a few seconds until the vacation mode indicator or icon appears. 3. Verify the vacation mode status: Once activated, check the control panel or display to ensure that the vacation mode indicator or icon is illuminated or displayed. This indicates that the refrigerator is in vacation mode. 4. Adjust temperature settings: In vacation mode, the refrigerator operates at a higher temperature to conserve energy. If you find that the temperature is not adjusting as expected, refer to the temperature control instructions in the manual to ensure proper settings. By following these steps, you should be able to troubleshoot and activate the vacation mode feature in the Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the refrigerator is not turning off properly in the Whirlpool WRF535SWHV refrigerator?

To troubleshoot if the refrigerator is not turning off properly in the Whirlpool WRF535SWHV refrigerator, follow these steps: 1. Check the temperature settings: Ensure that the temperature settings are properly adjusted. If the refrigerator is set to a very low temperature, it may continue running to reach and maintain that temperature. Adjust the temperature settings to a moderate level and monitor if the refrigerator turns off as expected. 2. Clean the condenser coils: Over time, dust and debris can accumulate on the condenser coils, causing the refrigerator to work harder and potentially not turn off properly. Locate the condenser coils, usually at the back or bottom of the refrigerator, and clean them using a vacuum cleaner or a brush specifically designed for this purpose. 3. Verify the door seals: Inspect the door seals for any damage or gaps. Damaged or worn-out door seals can cause air leakage, leading to increased cooling demand and the refrigerator not turning off. If necessary, replace the door seals to ensure a proper seal. 4. Check for obstructions: Ensure that there are no obstructions blocking the airflow around the refrigerator, such as items placed too close to the vents or blocking the condenser coils. Clear any obstructions to allow proper airflow and cooling. By following these steps, you should be able to troubleshoot and resolve issues with the refrigerator not turning off properly in the Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the refrigerator is not cooling properly after moving it in the Whirlpool WRF535SWHV refrigerator?

To troubleshoot if the refrigerator is not cooling properly after moving it in the Whirlpool WRF535SWHV refrigerator, follow these steps: 1. Allow the refrigerator to stabilize: After moving the refrigerator, it is important to allow it to stabilize for at least 24 hours before expecting optimal cooling performance. This allows the refrigerant and internal components to settle. 2. Check the temperature settings: Ensure that the temperature settings are properly adjusted. The recommended temperature for the refrigerator compartment is between 37°F (3°C) and 40°F (4°C). Adjust the temperature settings accordingly and monitor if the refrigerator starts cooling properly. 3. Verify proper airflow: Check for any obstructions that may be blocking the airflow around the refrigerator, such as items placed too close to the vents or blocking the condenser coils. Clear any obstructions to allow proper airflow and cooling. 4. Clean the condenser coils: Over time, dust and debris can accumulate on the condenser coils, hindering the cooling performance. Locate the condenser coils, usually at the back or bottom of the refrigerator, and clean them using a vacuum cleaner or a brush specifically designed for this purpose. 5. Check the door seals: Inspect the door seals for any damage or gaps. Damaged or worn-out door seals can cause air leakage, leading to poor cooling efficiency. If necessary, replace the door seals to ensure a proper seal. By following these steps, you should be able to troubleshoot and resolve issues with the refrigerator not cooling properly after moving it in the Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the ice storage bin is not dispensing ice properly?

To troubleshoot if the ice storage bin of the Whirlpool WRF535SWHV refrigerator is not dispensing ice properly, you can follow these steps: 1. Check the alignment of the ice storage bin with the auger driver. Make sure the bin is properly locked in place for proper ice dispensing. If needed, turn the auger driver counterclockwise to align the bin correctly. 2. Ensure that the ice maker is turned on. On some models, there is a switch to turn on the ice maker. Verify that it is in the "On" position. 3. Slide the ice bin into the guiderails located on either side of the enclosure. Push the bin in until you feel resistance and then raise the front slightly before pushing it in until you hear an audible "click." 4. If the ice storage bin is not dispensing ice, remove it by inserting your fingers into the hole at the base of the bin and squeezing the latch to release it from the compartment. Lift the bin up and pull it straight out. 5. Inspect the ice storage bin for any obstructions or clumped ice. If necessary, use a plastic utensil to remove any ice clogging the bin and the delivery chute. 6. Clean the ice delivery chute and the bottom of the ice storage bin using a warm, damp cloth. Ensure they are dry before reinserting the bin. By following these troubleshooting steps, you should be able to resolve any issues with the ice storage bin not dispensing ice properly in your Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the water filtration system is not working?

To troubleshoot if the water filtration system of the Whirlpool WRF535SWHV refrigerator is not working, you can follow these steps: 1. Check if the water filter is properly installed. Locate the water filter compartment, which is usually located in the top-right corner of the refrigerator ceiling. Open the compartment door and ensure that the filter is securely locked into the housing. If not, remove the filter and reinsert it, making sure to align the arrow on the filter label with the cutout notch in the filter housing. Turn the filter clockwise 90 degrees (1/4 turn) until it locks into place. 2. Verify that the water filter is not clogged or expired. If the filter has been in use for more than 6 months, it may need to be replaced. Remove the filter and inspect it for any signs of clogging or damage. If necessary, replace the filter with a new one. 3. Check the water supply to the refrigerator. Ensure that the water supply valve is fully open and that there are no kinks or blockages in the water line. 4. Flush the water system. After installing a new filter or if the refrigerator has not been used for a while, it is recommended to flush the water system to remove any air or impurities. Follow the instructions in the manual to flush the water system properly. By following these troubleshooting steps, you should be able to identify and resolve any issues with the water filtration system of your Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the refrigerator is not entering vacation mode?

To troubleshoot if the Whirlpool WRF535SWHV refrigerator is not entering vacation mode, you can follow these steps: 1. Ensure that the ice maker is turned off. Depending on your model, either raise the wire shut-off arm to the "Off" (up) position or press the switch to "Off". 2. Empty the ice bin to prevent any ice from melting and causing water leakage. 3. Turn on vacation mode by following the instructions provided in the "Quick Start Guide" section of the manual. Note that activating vacation mode does not turn off the ice maker. 4. If the refrigerator is not entering vacation mode, make sure that the temperature control(s) are turned off. Refer to the "Quick Start Guide" for instructions on how to turn off the temperature control(s). 5. Clean the refrigerator by wiping it and drying it well before leaving. This helps prevent any odor or mold buildup. 6. If you encounter any issues or have further questions, refer to the "Installation Instructions" section of the manual for additional troubleshooting steps. By following these steps, you should be able to troubleshoot and resolve any issues with the vacation mode of your Whirlpool WRF535SWHV refrigerator.

How do I troubleshoot if the refrigerator is not cooling properly after moving it?

To troubleshoot if the Whirlpool WRF535SWHV refrigerator is not cooling properly after moving it, you can follow these steps: 1. Ensure that the refrigerator is properly leveled. Use a level to check if the refrigerator is balanced and adjust the leveling feet if necessary. A properly leveled refrigerator ensures optimal cooling performance. 2. Check if the temperature controls are set correctly. Verify that the temperature settings are appropriate for your desired cooling level. Refer to the "Quick Start Guide" in the manual for instructions on adjusting the temperature controls. 3. Allow the refrigerator to stabilize. After moving the refrigerator, it may take some time for it to reach the desired temperature. Wait at least 24 hours for the refrigerator to stabilize and cool down before assessing its cooling performance. 4. Check for any obstructions or blockages in the air vents. Ensure that the air vents inside the refrigerator and freezer compartments are not blocked by food items or other objects. Clear any obstructions to allow proper airflow. 5. Clean the condenser coils. Dust and debris can accumulate on the condenser coils, affecting the cooling efficiency. Use a vacuum cleaner or a brush to gently clean the coils located at the back or bottom of the refrigerator. 6. If the issue persists, refer to the "Installation Instructions" section of the manual for additional troubleshooting steps or contact Whirlpool customer support for further assistance. By following these steps, you should be able to troubleshoot and resolve any cooling issues with your Whirlpool WRF535SWHV refrigerator after moving it.

How do I troubleshoot if there are issues with the unpacking and installation process of the refrigerator?

To troubleshoot issues with the unpacking and installation process of the Whirlpool WRF535SWHV refrigerator, you can follow these steps: 1. Before starting the installation, read all the instructions provided in the manual and ensure that you have all the necessary tools and parts. 2. Make sure to install the refrigerator plumbing according to the International Plumbing Code and local codes. Use polyethylene or copper tubing for connecting the refrigerator to the water supply. Check for leaks and ensure that the connections are secure. 3. Install the tubing to the shut-off valve using a compression fitting. Ensure that the tubing is cut at a right angle and insert it as deeply as possible into the outlet end of the fitting. Use a wrench to tighten the compression nut, but avoid overtightening. 4. Cut off the main water supply and open the nearest faucet to drain the water from the pipe before connecting the refrigerator to the water supply. 5. Once the plumbing is properly installed, plug in the refrigerator and connect it to the power source. 6. To flush the water system and remove any air, press and hold a sturdy container against the water dispenser pad for 5 seconds, then release it for 5 seconds. Repeat this process until water starts flowing. Continue pressing and releasing the dispenser pad until a total of 3 gallons (12 liters) of water has been dispensed. By following these steps, you should be able to troubleshoot any issues with the unpacking and installation process of your Whirlpool WRF535SWHV refrigerator.

Is the manual of the Whirlpool WRF535SWHV available in English?

Yes, the manual of the Whirlpool WRF535SWHV is available in English .

Is your question not listed? Ask your question here

No results