Whirlpool WFW5605MW manual

Whirlpool WFW5605MW
9.5 · 4
PDF manual
 · 32 pages
English
manualWhirlpool WFW5605MW
22

Description du nettoyage de la laveuse avec

affresh

®®

Fonctionnement des programmes

1. Le programme Clean Washer with Affresh (nettoyage de la
laveuse avec affresh) détermine si des vêtements ou autres
articles se trouvent dans la laveuse.
2. Si aucun article n’est détecté dans la laveuse, l’exécution du
programme se poursuit.
a. Si des articles sont détectés dans la laveuse, « rL »
(remove load) s’affiche pour indiquer qu’il faut retirer la
charge. La porte se déverrouille. Ouvrir la laveuse et
retirer tous les vêtements qui se trouvent dans le tambour
de la laveuse.
b. Toucher le bouton Power (alimentation) pour effacer le
code « rL ».
c. Toucher et maintenir enfoncé le bouton de Start/Pause
(mise en marche/pause) pour redémarrer le programme.
3. Modèles à vapeur uniquement : Durant ses 20 premières
minutes, le programme active la génération de vapeur, mais le
tambour ne tourne pas et ne se remplit pas d’eau. De la
condensation peut se former sur la porte en verre durant cette
phase initiale. En cas d’utilisation d’une pastille
de nettoyant
pour laveuse affresh
®
, celle-ci ne se dissout pas entièrement
durant la phase de génération de vapeur. Ceci est normal.
À la fin du programme, laisser la porte entrouverte pour
permettre une meilleure ventilation et pour que l’intérieur de la
laveuse puisse sécher.
Nettoyage des distributeurs
Après avoir utilisé la laveuse pendant longtemps, on peut parfois
constater une accumulation de résidus dans les distributeurs de la
laveuse.
Pour le distributeur à une charge ou optionnel : Retirer le tiroir
et essuyer les surfaces avec une lingette de nettoyage
pour
laveuse affresh
®
ou un chiffon humide, et sécher avec une
serviette avant ou après l’exécution du programme Clean Washer
with affresh (nettoyage de la laveuse avec affresh
®
)
. Si
nécessaire, utiliser un nettoyant tout usage.
Pour le distributeur Load & Go: Soulever la poignée sur le
boîtier du distributeur et tirer pour le retirer de la caisse de la
laveuse; rincer ensuite le distributeur à fond avec de l’eau
courante. Essuyer la surface externe du distributeur avec une
lingette de nettoyage pour laveuse
affresh
®
ou un chiffon humide
et sécher avec une serviette. Si nécessaire, utiliser un nettoyant
tout usage.
Replacer le distributeur dans la caisse de la laveuse en s’assurant
qu’il est bien placé.
IMPORTANT : Les distributeurs ne sont pas lavables au lave-
vaisselle.
Nettoyage de l’extérieur de la laveuse
IMPORTANT : Afin d’éviter d’endommager le revêtement de la
laveuse, ne pas utiliser de produits abrasifs.
Utiliser une lingette
affresh
®
pour nettoyer la machine, une éponge
ou un chiffon doux et humide pour essuyer tout renversement.
Essuyer de temps en temps les surfaces externes de la laveuse
pour entretenir son aspect neuf. Utiliser une lingette
affresh pour
nettoyer la machine ou de l’eau et un savon doux.
Rappel de lancement du programme
Clean Washer (nettoyage de la

laveuse)

REMARQUE : Les modèles ne sont pas tous équipés du témoin
lumineux Clean Washer with affresh
®
(nettoyage de la laveuse
avec affresh).
Le message Clean Washer with affresh
®
clignote à la fin d’un
programme de lavage après que la laveuse a effectué 30
programmes de lavage. Il fait office de rappel indiquant à
l’utilisateur qu’il faut faire fonctionner le programme Clean Washer
with affresh
®
(nettoyage de la laveuse avec affresh
®
).
Si le programme Clean Washer with affresh
®
n’est pas activé, le
message cesse de clignoter à la fin d’un programme de lavage
après que la laveuse a effectué 3 programmes de lavage
ordinaires supplémentaires. Après que la laveuse a effectué 30
programmes de lavage supplémentaires, le message Clean
Washer with affresh
®
clignote à nouveau à la fin d’un programme
de lavage en guise de rappel.
Retrait du distributeur
Tiroir distributeur de dosage optimal (sur certains

modèles)

Pour enlever :

1. Retirer le tiroir distributeur jusqu’en butée.

2. Appuyer sur la patte de déverrouillage et dégager le

distributeur en le tirant tout droit.

View the manual for the Whirlpool WFW5605MW here, for free. This manual comes under the category washing machines and has been rated by 4 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Whirlpool WFW5605MW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 91
L
Lori hayesJuly 23, 2023

How do you access the drain pump on my whirlpool washing machine when it’s in the front of my front loader

How do you access the drain pump on my whirlpool washing machine when it’s in the front of my front loader
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

To access the drain pump of the Whirlpool WFW5605MW washing machine when it is located at the front of the front loader, follow these steps: 1. Turn off the washer before cleaning the drain pump filter. 2. Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter. 3. Remove the drawer by releasing the tab on each side. Push down on the tab on the right side and up on the tab on the left side. 4. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the hose clip, remove the plug, and drain the hose into the container. Empty the container. Repeat this procedure if necessary until all the water has drained. Make sure the black hose is completely dry, replace the plug, and secure the hose in the clip. 5. Lay a cotton cloth beneath the drain pump filter to absorb any remaining water. Then, turn the drain pump filter counterclockwise to remove it. 6. Remove any large clumps of lint by hand from the filter and dispose of them in a suitable waste container. Rinse the filter with water to remove any remaining residue. 7. Reinsert the drain pump filter by turning it clockwise. Make sure to turn it as far as it will go, with the filter handle remaining as close as possible to the vertical position. 8. Replace and close the dispenser drawer. Make sure to insert both rails simultaneously when replacing the drawer. You will hear a clicking sound that indicates the rails have engaged. To ensure proper placement of the drawer, pull it out fully. The drawer should be fully engaged and the rails locked in place. Make sure the drain hose is secured in the hose clip and tucked underneath the cutout.

This answer is automatically generated
B
BlancaFebruary 29, 2024

How do I stop or cancel the washer, keeps blinking, turned off and doesn't stop when turned on again?

How do I stop or cancel the washer, keeps blinking, turned off and doesn't stop when turned on again?
zoom-in
View photo
1 comment
E
Emma of manua.lsMarch 18, 2024

To stop the washer from blinking and not stopping when turned on again, unplug the machine for a few minutes and then plug it back in. This can reset the washer and stop the blinking issue.

This answer is automatically generated
F
Fay johnsonSeptember 27, 2022

Why is my washer only showing a wash cycle and dosen't show when it's rinsing or spinning.is it rinsing it only show washing and end

1 comment
G
GloriaOctober 27, 2023

same problem

D
Deborah ShreckengostDecember 11, 2022

My washer keeps shutting off and displaying Lo Fl. Why is this happening? The first time it did it, the clothes were still dry.

1 comment
D
Debbie Laverdiere October 23, 2023

Mine is doing the same thing. Lo Fl

L
Lynne Susanne NiemanApril 25, 2023

My front load washer model wfw5605mw displays Loc with a red screwdriver image when I press the power button. How do I turn that off?

J
Julie RodriguezMay 6, 2023

My washer machine is showing LOC when I’m trying to wash it doesn’t let me do anything

K
KateJune 17, 2023

Can’t get the control lock off..held the extra rinse button for 3 seconds and screen displays…3 -2-1 LOC…..no power to power button

M
Martha June 18, 2023

I ran a load with bleach. The load is finished but the bleach dispenser is still full. How do I empty it and why didn't the bleach dispense properly?

P
PeggyJuly 11, 2023

My whirlpool washer doesn’t have the panel in the front to clean the filter. How am I supposed to clean it. took the back off and pump faces to the front

1 comment
R
Ron YDecember 11, 2023

Did you find the answer to your question? I’m having the same issue.

S
Steve NelsonSeptember 26, 2023

I turned on washer to wash, now the panel seems to have no power to operate after it started, no lights on the control panel and the machine has stopped/locked with laundry inside. Fuse panel reset in home, unplugged and plugged back in and tested outlet…it has power!

The Whirlpool WFW5605MW is a washing machine model that offers efficient and reliable performance. Designed with practicality in mind, this machine is built to effectively clean a variety of fabrics and garments. Featuring a spacious drum capacity, the Whirlpool WFW5605MW allows for larger loads, reducing the number of cycles needed. This not only saves time but also energy and water consumption. Equipped with advanced washing programs, this machine offers various options such as delicate, heavy-duty, and quick wash, catering to different cleaning needs. The intuitive control panel allows for easy program selection and adjustment, ensuring convenience for users. The Whirlpool WFW5605MW incorporates innovative technology to provide efficient cleaning results. The high-speed spin cycle helps to remove excess water, reducing drying time. Additionally, it features sensors that automatically adjust the water level and temperature based on the load, optimizing energy usage. Built with quality materials, this washing machine is durable and designed to withstand frequent use. The sturdy construction ensures that it can withstand the rigors of daily laundry tasks without compromising performance. In conclusion, the Whirlpool WFW5605MW is a reliable and efficient washing machine that offers a range of features to simplify laundry tasks. With its large capacity, advanced programs, and durable construction, it provides users with a practical and effective solution for their cleaning needs.

General
BrandWhirlpool
ModelWFW5605MW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WFW5605MW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my Whirlpool WFW5605MW not turning on?

First, make sure the power cord is securely plugged into a functioning power outlet. If the machine still doesn't turn on, check the circuit breaker to ensure it hasn't tripped. Also, verify that the door is properly closed, as the machine won't start if the door is ajar.

How can I resolve excessive vibration and noise during the wash cycle?

It's important to ensure that the washing machine is properly leveled. Use a level tool to adjust the feet of the machine until it is balanced on all four corners. Uneven loads can also contribute to excessive vibrations, so make sure to distribute the clothes evenly inside the drum.

How do I clean the detergent dispenser drawer?

To clean the detergent dispenser, simply remove it from the machine by pulling it out until it stops and then lifting it out. Rinse the drawer under warm water to remove any residual detergent buildup and dry it thoroughly before reinserting it into the machine.

What to do if water is not draining properly?

Start by checking if the drain hose is kinked or clogged. Ensure that the hose is positioned correctly and not obstructed in any way. Additionally, inspect the drain pump filter for any debris or obstructions, and clean if necessary. If the issue persists, it might be necessary to contact a professional technician.

How can I troubleshoot if the clothes are not spinning or draining properly?

First, confirm that you have selected the appropriate wash cycle and that the machine is not overloaded. If the clothes are still not spinning or draining properly, check the drain hose for any clogs or blocks. Ensure that the machine is not unbalanced, as this can affect the spin cycle. If the problem persists, it is advisable to contact Whirlpool customer support for further assistance.

Is the manual of the Whirlpool WFW5605MW available in English?

Yes, the manual of the Whirlpool WFW5605MW is available in English .

Is your question not listed? Ask your question here

No results