Whirlpool WFW5605MW manual

Whirlpool WFW5605MW
9.5 · 4
PDF manual
 · 32 pages
English
manualWhirlpool WFW5605MW
19

CHOIX DU DÉTERGENT

APPROPRIÉ

Utiliser uniquement des détergents haute efficacité. L’emballage

portera la mention « HE » ou « High Efficiency » (haute efficacité).

Un lavage avec faible consommation d’eau produit un excès de

mousse avec un détergent non HE. Il est probable que l’utilisation

d’un détergent autre que HE prolonge la durée des programmes

et réduise la performance de rinçage. Ceci peut aussi entraîner

des défaillances des composants et, avec le temps, une

accumulation de moisissure. Les détergents HE devraient

produire peu de mousse et se dissoudre rapidement et créer une

quantité de mousse idéale pour une performance optimale. Ils

devraient retenir les particules de saleté en suspension afin

qu’elles ne se déposent pas de nouveau sur les vêtements

propres. Les détergents identifiés HE ne sont pas tous identiques

et ne produisent pas tous la même quantité de mousse. Par

exemple, les détergents HE, naturels, organiques et faits maison

peuvent produire une plus grande quantité de mousse. Si l’un de

ces produits est utilisé et que le code d’erreur « Sd » ou « Sud »

s’affiche sur l’afficheur, l’utilisation d’un autre détergent HE est

conseillée. Toujours suivre les recommandations du fabricant de

détergent pour déterminer la quantité de détergent à utiliser. Ne

pas remplir au-delà de la ligne MAX sur le distributeur.

Ajouter les produits de lessive

Ajouter du détergent HE au panier :

On peut ajouter des sachets de

lessive à dose unique, des

activateurs de lessive de type Oxi,

de javellisant non décolorant ou

des cristaux parfumés dans le

tambour avant d’ajouter la lessive.

Lors de l’utilisation de sachets de

lessive à dose unique, s’assurer

que le distributeur Load & Go est

désactivé (sur certains modèles) ou

éteint.

REMARQUE : Suivre les instructions du fabricant pour déterminer

la quantité de produits de lessive à utiliser.

Verser de l’eau de Javel dans le distributeur pour charge

unique :

Verser l’eau de Javel dans le

compartiment pour eau de

Javel. Ne pas remplir

excessivement le distributeur,

diluer le produit ou utiliser plus

de 2/3 tasse (165 mL). Ne pas

utiliser d’agent de blanchiment

sans danger pour les couleurs

ni de produit Oxi avec un

programme utilisant de l’eau

de Javel.

IMPORTANT :

Toujours mesurer la quantité d’eau de Javel. Utiliser une tasse

à mesurer avec un bec verseur; ne pas utiliser une quantité

approximative.

Ne pas remplir au-delà du niveau « Max ». Un remplissage

excessif pourrait endommager les vêtements.

Ne pas utiliser de l’eau de Javel épaisse, facile à verser ou

anti-éclaboussure lorsque le programme Clean Washer with

affresh

®
(nettoyage de la laveuse avec affresh
®

) est en cours,

car cela peut entraîner une surproduction de mousse.

Sur certains modèles : Ne pas verser de l’eau de Javel dans le

distributeur de vrac.

Fermer lentement les tiroirs distributeurs. S’assurer que les

tiroirs sont fermés complètement (sur certains modèles).

Verser de l’assouplissant de tissu liquide dans le distributeur

pour charge unique :

Verser une mesure de
l’assouplissant de tissu liquide
dans le compartiment
d’assouplissant de tissu
liquide. Toujours suivre les
instructions du fabricant pour
connaître la quantité
d’assouplissant de tissu
adéquate en fonction de la
taille de la charge. Désactiver
le distributeur de 1 L Load &
Go s’il n’est pas utilisé pour
distribuer du détergent (sur

certains modèles).

L’assouplissant de tissu est toujours distribué lors du rinçage

final, même si l’on a sélectionné Extra Rinse.

IMPORTANT : Ne pas remplir excessivement le distributeur, diluer

le produit ou utiliser plus de la quantité d’assouplissant

recommandée par le fabricant. Ne pas remplir au-delà du niveau

« MAX ». Si l’on remplit excessivement le distributeur,

l’assouplissant de tissu sera immédiatement distribué dans la

laveuse.

Ne pas renverser ou faire couler d’assouplissant de tissu sur

les vêtements.

Ne pas utiliser de boules distributrices d’assouplissant de tissu

dans cette laveuse. Ces produits ne se dissoudront pas

correctement.

Ne pas utiliser de feuilles d’assouplissant, car elles peuvent

tacher la charge.

Ajouter du détergent HE au tiroir distributeur optimal (sur

certains modèles) :

Le compartiment peut contenir
jusqu’à 14,3 oz (424 mL) de
détergent liquide HE, ainsi il n’est
pas nécessaire de remplir le
compartiment de détergent pour
chaque charge. De plus, le
compartiment distribue juste la
bonne quantité de détergent
nécessaire pour une charge/un

programme particulier.

REMARQUE : Ne pas placer de sachets de lessive à dose
unique, d’activateurs de lessive de type Oxi, d’agent de
blanchiment sans danger pour les couleurs ou d’assouplissant
pour tissu sous forme de cristaux dans les distributeurs. Ces
produits ne se dissoudront pas correctement. Le tiroir

distributeur optimal ne peut pas être désactivé.

affresh
®
est une marque déposée de Whirlpool, É.-U.

View the manual for the Whirlpool WFW5605MW here, for free. This manual comes under the category washing machines and has been rated by 4 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Whirlpool WFW5605MW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 91
L
Lori hayesJuly 23, 2023

How do you access the drain pump on my whirlpool washing machine when it’s in the front of my front loader

How do you access the drain pump on my whirlpool washing machine when it’s in the front of my front loader
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

To access the drain pump of the Whirlpool WFW5605MW washing machine when it is located at the front of the front loader, follow these steps: 1. Turn off the washer before cleaning the drain pump filter. 2. Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter. 3. Remove the drawer by releasing the tab on each side. Push down on the tab on the right side and up on the tab on the left side. 4. Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the hose clip, remove the plug, and drain the hose into the container. Empty the container. Repeat this procedure if necessary until all the water has drained. Make sure the black hose is completely dry, replace the plug, and secure the hose in the clip. 5. Lay a cotton cloth beneath the drain pump filter to absorb any remaining water. Then, turn the drain pump filter counterclockwise to remove it. 6. Remove any large clumps of lint by hand from the filter and dispose of them in a suitable waste container. Rinse the filter with water to remove any remaining residue. 7. Reinsert the drain pump filter by turning it clockwise. Make sure to turn it as far as it will go, with the filter handle remaining as close as possible to the vertical position. 8. Replace and close the dispenser drawer. Make sure to insert both rails simultaneously when replacing the drawer. You will hear a clicking sound that indicates the rails have engaged. To ensure proper placement of the drawer, pull it out fully. The drawer should be fully engaged and the rails locked in place. Make sure the drain hose is secured in the hose clip and tucked underneath the cutout.

This answer is automatically generated
B
BlancaFebruary 29, 2024

How do I stop or cancel the washer, keeps blinking, turned off and doesn't stop when turned on again?

How do I stop or cancel the washer, keeps blinking, turned off and doesn't stop when turned on again?
zoom-in
View photo
1 comment
E
Emma of manua.lsMarch 18, 2024

To stop the washer from blinking and not stopping when turned on again, unplug the machine for a few minutes and then plug it back in. This can reset the washer and stop the blinking issue.

This answer is automatically generated
F
Fay johnsonSeptember 27, 2022

Why is my washer only showing a wash cycle and dosen't show when it's rinsing or spinning.is it rinsing it only show washing and end

1 comment
G
GloriaOctober 27, 2023

same problem

D
Deborah ShreckengostDecember 11, 2022

My washer keeps shutting off and displaying Lo Fl. Why is this happening? The first time it did it, the clothes were still dry.

1 comment
D
Debbie Laverdiere October 23, 2023

Mine is doing the same thing. Lo Fl

L
Lynne Susanne NiemanApril 25, 2023

My front load washer model wfw5605mw displays Loc with a red screwdriver image when I press the power button. How do I turn that off?

J
Julie RodriguezMay 6, 2023

My washer machine is showing LOC when I’m trying to wash it doesn’t let me do anything

K
KateJune 17, 2023

Can’t get the control lock off..held the extra rinse button for 3 seconds and screen displays…3 -2-1 LOC…..no power to power button

M
Martha June 18, 2023

I ran a load with bleach. The load is finished but the bleach dispenser is still full. How do I empty it and why didn't the bleach dispense properly?

P
PeggyJuly 11, 2023

My whirlpool washer doesn’t have the panel in the front to clean the filter. How am I supposed to clean it. took the back off and pump faces to the front

1 comment
R
Ron YDecember 11, 2023

Did you find the answer to your question? I’m having the same issue.

S
Steve NelsonSeptember 26, 2023

I turned on washer to wash, now the panel seems to have no power to operate after it started, no lights on the control panel and the machine has stopped/locked with laundry inside. Fuse panel reset in home, unplugged and plugged back in and tested outlet…it has power!

The Whirlpool WFW5605MW is a washing machine model that offers efficient and reliable performance. Designed with practicality in mind, this machine is built to effectively clean a variety of fabrics and garments. Featuring a spacious drum capacity, the Whirlpool WFW5605MW allows for larger loads, reducing the number of cycles needed. This not only saves time but also energy and water consumption. Equipped with advanced washing programs, this machine offers various options such as delicate, heavy-duty, and quick wash, catering to different cleaning needs. The intuitive control panel allows for easy program selection and adjustment, ensuring convenience for users. The Whirlpool WFW5605MW incorporates innovative technology to provide efficient cleaning results. The high-speed spin cycle helps to remove excess water, reducing drying time. Additionally, it features sensors that automatically adjust the water level and temperature based on the load, optimizing energy usage. Built with quality materials, this washing machine is durable and designed to withstand frequent use. The sturdy construction ensures that it can withstand the rigors of daily laundry tasks without compromising performance. In conclusion, the Whirlpool WFW5605MW is a reliable and efficient washing machine that offers a range of features to simplify laundry tasks. With its large capacity, advanced programs, and durable construction, it provides users with a practical and effective solution for their cleaning needs.

General
BrandWhirlpool
ModelWFW5605MW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool WFW5605MW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my Whirlpool WFW5605MW not turning on?

First, make sure the power cord is securely plugged into a functioning power outlet. If the machine still doesn't turn on, check the circuit breaker to ensure it hasn't tripped. Also, verify that the door is properly closed, as the machine won't start if the door is ajar.

How can I resolve excessive vibration and noise during the wash cycle?

It's important to ensure that the washing machine is properly leveled. Use a level tool to adjust the feet of the machine until it is balanced on all four corners. Uneven loads can also contribute to excessive vibrations, so make sure to distribute the clothes evenly inside the drum.

How do I clean the detergent dispenser drawer?

To clean the detergent dispenser, simply remove it from the machine by pulling it out until it stops and then lifting it out. Rinse the drawer under warm water to remove any residual detergent buildup and dry it thoroughly before reinserting it into the machine.

What to do if water is not draining properly?

Start by checking if the drain hose is kinked or clogged. Ensure that the hose is positioned correctly and not obstructed in any way. Additionally, inspect the drain pump filter for any debris or obstructions, and clean if necessary. If the issue persists, it might be necessary to contact a professional technician.

How can I troubleshoot if the clothes are not spinning or draining properly?

First, confirm that you have selected the appropriate wash cycle and that the machine is not overloaded. If the clothes are still not spinning or draining properly, check the drain hose for any clogs or blocks. Ensure that the machine is not unbalanced, as this can affect the spin cycle. If the problem persists, it is advisable to contact Whirlpool customer support for further assistance.

Is the manual of the Whirlpool WFW5605MW available in English?

Yes, the manual of the Whirlpool WFW5605MW is available in English .

Is your question not listed? Ask your question here

No results