Whirlpool MFF2258VEW manual

Whirlpool MFF2258VEW
7.5 · 1
PDF manual
 · 40 pages
English
manualWhirlpool MFF2258VEW
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900.
In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.
You will need your model and serial number, located on the inside wall of the refrigerator compartment.
Para obtener acceso a “Instrucciones para el usuario del refrigerador” en español, o para obtener información adicional acerca de
su producto, visite: www.maytag.com.Necesitará su número de modelo y de serie, ubicado en el interior del compartimiento del refrigerador.

REFRIGERATOR SAFETY

Table of Contents / Table des matières
REFRIGERATOR SAFETY ........................................................1
INSTALLATION INSTRUCTIONS.............................................2
REFRIGERATOR USE.............................................................11
REFRIGERATOR CARE..........................................................14
TROUBLESHOOTING.............................................................15
WATER FILTER CERTIFICATIONS........................................17
PRODUCT DATA SHEETS .....................................................18
WARRANTY .............................................................................19
SÉCURITÉ DU RÉFRIGÉRATEUR .........................................20
INSTRUCTIONS D’INSTALLATION .......................................21
UTILISATION DU RÉFRIGÉRATEUR.....................................30
ENTRETIEN DU RÉFRIGÉRATEUR.......................................35
DÉPANNAGE ...........................................................................36
FEUILLES DE DONNÉES SUR LE PRODUIT........................39
GARANTIE................................................................................40

REFRIGERATOR

USER INSTRUCTIONS

W10208789AYou can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don'tfollow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.This is the safety alert symbol.This symbol alerts you to potential hazards that can kill or hurt you and others.All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”These words mean:follow instructions.instructions.

DANGER

WARNING

View the manual for the Whirlpool MFF2258VEW here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Whirlpool MFF2258VEW or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandWhirlpool
ModelMFF2258VEW
Productrefrigerator
EAN0883049159669
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool MFF2258VEW below.

How do I prevent drops from forming on the glass plates of my fridge?

There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?

What do I do about a smelly fridge?

A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.

How much free space does my fridge need?

A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How do I troubleshoot if the water dispenser of the Whirlpool MFF2258VEW refrigerator is not working?

To troubleshoot if the water dispenser of the Whirlpool MFF2258VEW refrigerator is not working, you can follow these steps: 1. Check the water supply: Ensure that the refrigerator is connected to a water supply and that the supply shutoff valve is turned on. Straighten any kinks in the water source line. 2. Verify water pressure: Make sure the water pressure to your home is at least 35 psi (241 kPa). Low water pressure can affect the flow from the dispenser. 3. Inspect the water filter: If a water filter is installed, remove it and operate the dispenser. If the water flow increases, the filter may be clogged or incorrectly installed. Replace the filter or reinstall it correctly. 4. Close the refrigerator door properly: Ensure that the refrigerator door is closed firmly. If it does not close completely, refer to the manual for troubleshooting steps. 5. Check for recent changes or installations: If you recently removed the doors or connected a reverse osmosis water filtration system, make sure all connections are properly reconnected and that the water supply requirements are met. If the issue persists after following these steps, it is recommended to consult the manual or contact Whirlpool customer support for further assistance.

What should I do if the water filter status lights on the Whirlpool MFF2258VEW refrigerator are not functioning properly?

To troubleshoot if the water filter status lights on the Whirlpool MFF2258VEW refrigerator are not functioning properly, you can follow these steps: 1. Press and hold the Reset Filter touch pad for 3 seconds until the Order or Replace light turns off. This will restart the water filter status tracking feature. 2. If the lights continue to malfunction, check if the water filter is correctly installed. Remove the water filter and reinstall it, ensuring it is properly aligned and securely in place. 3. Verify that the water filter is not clogged. If the flow of water to the dispenser or ice maker has decreased noticeably, it may be time to replace the water filter. Replace the water filter at least every 6 months or earlier if needed. 4. After replacing the water filter, press and hold the Reset Filter or Filter Reset button for 3 seconds to reset the system. The Order and Replace indicator lights will blink and then turn off. If the issue persists or the lights do not function properly after following these steps, it is recommended to contact Whirlpool customer support for further assistance.

How can I troubleshoot if the ice maker of the Whirlpool MFF2258VEW refrigerator is not producing ice?

To troubleshoot if the ice maker of the Whirlpool MFF2258VEW refrigerator is not producing ice, you can follow these steps: 1. Check the water supply: Ensure that the refrigerator is connected to a water supply and that the supply shutoff valve is turned on. Straighten any kinks in the water source line. 2. Verify the ice maker is turned on: Make sure the wire shutoff arm or switch (depending on the model) is in the ON position. 3. Check for a recently installed ice maker: If the ice maker was recently installed, wait 24 hours for ice production to begin. It may take up to 72 hours for full ice production. 4. Ensure the freezer door is closed completely: Firmly close the freezer compartment door. If the door does not close all the way, refer to the manual for troubleshooting steps. 5. Inspect the water filter: If a water filter is installed, remove it and operate the ice maker. If the ice production improves, the filter may be clogged or incorrectly installed. Replace or reinstall the filter correctly. 6. Check for a reverse osmosis water filtration system: If your refrigerator is connected to a reverse osmosis water filtration system, it may decrease water pressure. Refer to the manual for water supply requirements. If the issue persists after following these steps, it is recommended to contact Whirlpool customer support for further assistance.

What steps should I follow to clean the refrigerator and freezer sections of the Whirlpool MFF2258VEW refrigerator?

To clean the refrigerator and freezer sections of the Whirlpool MFF2258VEW refrigerator, follow these steps: 1. Unplug the refrigerator or disconnect the power source. 2. Wash removable parts and internal surfaces by hand using a sponge or soft cloth and a mild detergent in warm water. Ensure thorough cleaning and wipe up any spills immediately. 3. Clean the exterior surfaces of the refrigerator. For painted metal surfaces, use a soft cloth or sponge and a mild detergent in warm water. Rinse with clean, warm water and dry immediately to prevent water stains. For stainless steel surfaces, use a soft cloth or sponge and a mild detergent in warm water. Rinse with clean, warm water and dry immediately to avoid water spots. 4. Regularly clean the condenser coils. Move the refrigerator away from the wall, vacuum the coils when they are dirty or dusty, and ensure there is at least a 1-inch (2.5 cm) space between the back of the refrigerator and the wall. 5. Plug in the refrigerator or reconnect the power source. Note: Avoid using abrasive cleaners, bleach, petroleum-based cleaners, paper towels, scrub pads, or other abrasive tools for cleaning. Refer to the manual for specific cleaning instructions for stainless steel surfaces. By following these steps, you can effectively clean the refrigerator and freezer sections of the Whirlpool MFF2258VEW refrigerator.

How do I troubleshoot if the digital control settings on the Whirlpool MFF2258VEW refrigerator are not working as expected?

To troubleshoot if the digital control settings on the Whirlpool MFF2258VEW refrigerator are not working as expected, you can follow these steps: 1. Check the power supply: Ensure that the refrigerator is properly plugged in and receiving power. Verify that the circuit breaker or fuse for the refrigerator is not tripped or blown. 2. Reset the control settings: Press and hold the Reset Filter touch pad for 3 seconds to reset the control settings. This may resolve any temporary issues with the digital controls. 3. Verify the temperature settings: Check the temperature settings for the refrigerator and freezer compartments. Use the (+) or (-) touch pads to adjust the set point temperatures as desired. Wait 24 hours for the temperature to stabilize after making adjustments. 4. Check for error codes: If there are error codes displayed on the control panel, refer to the manual for specific troubleshooting steps related to the error codes. 5. Perform a power cycle: If the digital controls are still not functioning properly, try unplugging the refrigerator from the power source for a few minutes, then plug it back in. This can help reset the control system. If the issue persists after following these steps, it is recommended to contact Whirlpool customer support for further assistance.

What should I do if the humidity control in the crisper of the Whirlpool MFF2258VEW refrigerator is not functioning properly?

To troubleshoot if the humidity control in the crisper of the Whirlpool MFF2258VEW refrigerator is not functioning properly, you can follow these steps: 1. Locate the humidity control: Depending on your model, the humidity control may be located on the front or back wall of the crisper drawer. 2. Adjust the humidity control setting: If the humidity control is set to FRUIT or LOW, try adjusting it to VEGETABLES or HIGH. This will change the amount of humidity in the crisper drawer. 3. Clean the crisper drawer and gasket: Remove the contents of the crisper drawer and clean it with a mild detergent and warm water. Rinse and dry thoroughly. Also, clean the gasket around the crisper drawer to ensure a proper seal. 4. Check for obstructions: Make sure there are no items blocking the airflow in the crisper drawer. Ensure that the drawer is properly aligned and closes completely. 5. Monitor the humidity levels: After making adjustments, monitor the humidity levels in the crisper drawer over a period of time. If the humidity control still does not function properly, it is recommended to contact Whirlpool customer support for further assistance. By following these steps, you can troubleshoot issues with the humidity control in the crisper of the Whirlpool MFF2258VEW refrigerator.

Is the manual of the Whirlpool MFF2258VEW available in English?

Yes, the manual of the Whirlpool MFF2258VEW is available in English .

Is your question not listed? Ask your question here

No results