View the manual for the Whirlpool FWF 81284W IT here, for free. This manual comes under the category washing machines and has been rated by 11 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Whirlpool FWF 81284W IT or do you need help? Ask your question here



Below you will find the product specifications and the manual specifications of the Whirlpool FWF 81284W IT.
| Brand | Whirlpool |
| Model | FWF 81284W IT | FWF 81284W IT |
| Product | washing machine |
| EAN | 8003437729546 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Freestanding |
| Loading type | Front-load |
| Product color | White |
| Control type | Rotary |
| Built-in display | Yes |
| Cord length | 1.2 m |
| Door color | White |
| Door hinge | Left |
| Display illumination | Yes |
| Illumination color | White |
| Drum volume | 62 L |
| Tub material | Plastic |
| Timer | Yes |
| Cycle time (quick washing program) | 30 min |
| Drum capacity | 8 kg |
| Maximum spin speed | 1200 RPM |
| Noise level (spin) | 79 dB |
| Noise level (wash) | 52 dB |
| Adjustable spin speed | Yes |
| Spin-drying class | B |
| Cotton, Hand/wool, Wool, Jeans/denim, Quick, Delicate/silk | |
| Residual moisture | 53 % |
| Cycle time (max) | 225 min |
| Foam control system | Yes |
| Load balancing system | Yes |
| Delayed start timer | No |
| Width | 595 mm |
| Depth | 630 mm |
| Height | 845 mm |
| Weight | 71000 g |
| Package width | 640 mm |
| Package depth | 645 mm |
| Package height | 870 mm |
| Package weight | 72000 g |
| Current | 10 A |
| Connected load | 1850 W |
| A+++ | |
| Energy consumption washing per cycle | 0.98 kWh |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Adjustable feet | Yes |
| LED program stage indicator | Yes |
| Annual energy consumption washing | 177 kWh |
| Annual water consumption washing | 11650 L |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool FWF 81284W IT below.
The washing label of your garment shows the recommended washing temperature.
It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.
Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.
The Whirlpool FWF 81284W IT has a weight of 71000 g.
The Whirlpool FWF 81284W IT has a height of 845 mm.
The Whirlpool FWF 81284W IT has a width of 595 mm.
The Whirlpool FWF 81284W IT has a depth of 630 mm.
Yes, the Whirlpool FWF 81284W IT has a built-in display. This feature allows users to easily monitor and control the washing machine's settings.
The maximum spin speed of the Whirlpool FWF 81284W IT is 1200 RPM. This high spin speed helps to efficiently remove excess water from clothes, reducing drying time.
Yes, the Whirlpool FWF 81284W IT has an energy efficiency class of A+++. This means it is highly efficient in terms of energy consumption, helping to save on electricity bills.
Yes, the Whirlpool FWF 81284W IT has adjustable feet. This allows users to easily level the washing machine for optimal performance and stability.
The cycle time for the quick washing program on the Whirlpool FWF 81284W IT is 30 minutes. This means users can quickly wash smaller loads without having to wait for a longer cycle to complete.
To clean the outside of the Whirlpool FWF 81284W IT washing machine, follow these steps: 1. Switch off and unplug the washing machine before starting any cleaning or maintenance. 2. Use a soft damp cloth to clean the outer parts of the washing machine. Avoid using glass or general purpose cleaners, scouring powder, or similar substances on the control panel, as they may damage the printing. 3. Do not use flammable fluids for cleaning the washing machine. Additionally, here are some other cleaning and maintenance tips mentioned in the manual: - Checking the water supply hose: Regularly inspect the inlet hose for brittleness and cracks. If damaged, replace it with a new hose available through the After-Sales Service or your specialist dealer. - Cleaning the mesh filters in the water supply hose: Close the water tap and unscrew the inlet hose. Carefully clean the mesh filter at the hose's end with a fine brush. Unscrew the inlet hose on the back of the washing machine and clean the mesh filter from the valve. Reinsert the mesh filter, connect the inlet hose, and ensure all connections are tight. - Cleaning the detergent dispenser: Remove the detergent dispenser by pressing the release button and pulling it out. Remove the insert from the softener compartment. Clean all parts under running water to remove detergent or softener residues. Wipe the parts dry with a soft cloth and reinstall the detergent dispenser. Remember to always refer to the specific instructions provided in the manual for the Whirlpool FWF 81284W IT washing machine.
If the water supply hose of the Whirlpool FWF 81284W IT washing machine is leaking, follow these steps: 1. Switch off and unplug the washing machine before starting any maintenance. 2. Inspect the inlet hose regularly for brittleness and cracks. If you notice any damage, replace the hose with a new one available through the After-Sales Service or your specialist dealer. 3. If the inlet hose has a transparent coating, periodically check if the color intensifies locally. If it does, it may indicate a leak, and the hose should be replaced. 4. For water stop hoses, check the small safety valve inspection window. If it is red, it means the water stop function was triggered, and the hose must be replaced with a new one. 5. To remove the hose, press the release button (if available) while unscrewing it. 6. Once you have replaced the hose, ensure all connections are tight and secure. Remember to always refer to the specific instructions provided in the manual for the Whirlpool FWF 81284W IT washing machine.
To clean the mesh filters in the water supply hose of the Whirlpool FWF 81284W IT washing machine, follow these steps: 1. Close the water tap and unscrew the inlet hose from the washing machine. 2. Carefully clean the mesh filter at the end of the hose using a fine brush. 3. Unscrew the inlet hose on the back of the washing machine by hand. 4. Use pliers to pull out the mesh filter from the valve on the back of the washing machine and clean it thoroughly. 5. Insert the cleaned mesh filter back into the valve. 6. Reconnect the inlet hose to the water tap and the washing machine, ensuring that the connections are tight. Do not use any tools to connect the hose. 7. Open the water tap and check for any leaks. These steps will help ensure that the mesh filters in the water supply hose of your Whirlpool FWF 81284W IT washing machine are clean and functioning properly.
To clean the clogged detergent dispenser of the Whirlpool FWF 81284W IT washing machine, follow these steps: 1. Remove the detergent dispenser by pressing the release button and pulling it out. 2. Take out the insert from the softener compartment. 3. Clean all parts of the detergent dispenser under running water to remove any detergent or softener residues. 4. Use a soft cloth to wipe the parts dry. 5. Reinstall the detergent dispenser by pushing it back into the detergent compartment. These steps will help ensure that the detergent dispenser of your Whirlpool FWF 81284W IT washing machine is clean and free from any clogs. Regular cleaning of the detergent dispenser will help maintain its proper functioning and prevent any issues with dispensing detergent during the wash cycle. Please note that it is important to refer to the specific instructions provided in the manual for the Whirlpool FWF 81284W IT washing machine for detailed guidance on cleaning the detergent dispenser.
To clean the water filter and drain residual water from the Whirlpool FWF 81284W IT washing machine, follow these steps: 1. Switch off and unplug the washing machine before cleaning the water filter or draining residual water. Allow the water to cool down if you have used a hot wash program. 2. Remove the kick panel at the bottom of the washing machine using a screwdriver. 3. Place a low and wide container under the water filter to collect the residual water. 4. Slowly turn the water filter counter-clockwise to drain the water. Do not remove the filter completely. Close the water filter by turning it clockwise once the container is full, and empty the container. Repeat this process until all the water has been drained. 5. Lay a cotton cloth beneath the water filter to absorb any remaining water. Remove the water filter by turning it anticlockwise. 6. Clean the water filter by removing any residues and rinsing it under running water. 7. Insert the cleaned water filter back into the washing machine by turning it clockwise. Ensure it is securely tightened. 8. Reinstall the kick panel. 9. To test the water tightness of the water filter, you can pour about 1 liter of water into the detergent dispenser. 10. Enjoy using your clean Whirlpool FWF 81284W IT washing machine. Please note that these instructions are specific to the Whirlpool FWF 81284W IT washing machine and may vary for other models.
To clean the outside of the Whirlpool FWF 81284W IT washing machine, follow these steps: 1. Switch off and unplug the washing machine before starting any cleaning or maintenance. 2. Use a soft damp cloth to clean the outer parts of the washing machine. Avoid using glass or general purpose cleaners, scouring powder, or similar substances on the control panel, as they may damage the printing. 3. Do not use flammable fluids for cleaning the washing machine. 4. Regularly check the water supply hose for brittleness and cracks. If the hose is damaged, replace it with a new hose available through the After-Sales Service or your specialist dealer. 5. If the inlet hose has a transparent coating, periodically check if the color intensifies locally. If it does, the hose may have a leak and should be replaced. 6. For water stop hoses, check the small safety valve inspection window. If it is red, the water stop function was triggered, and the hose must be replaced. 7. To clean the mesh filters in the water supply hose, close the water tap and unscrew the inlet hose. Carefully clean the mesh filter at the hose's end with a fine brush. Unscrew the inlet hose on the back of the washing machine and remove the mesh filter from the valve. Clean it carefully and insert it back. Reconnect the inlet hose to the water tap and washing machine, ensuring all connections are tight. 8. To clean the detergent dispenser, remove it by pressing the release button and pulling it out. Remove the insert from the softener compartment. Clean all parts under running water, removing any detergent or softener residues. Wipe the parts dry with a soft cloth. Reinstall the detergent dispenser and push it back into the detergent compartment. Remember to always follow the safety instructions provided in the manual when cleaning the washing machine.
If the water supply hose of the Whirlpool FWF 81284W IT washing machine is leaking, follow these steps: 1. Switch off and unplug the washing machine before performing any maintenance. 2. Regularly check the inlet hose for brittleness and cracks. If you notice any damage, replace the hose with a new one available through the After-Sales Service or your specialist dealer. 3. If the inlet hose has a transparent coating, periodically check if the color intensifies locally. If it does, it may indicate a leak, and the hose should be replaced. 4. For water stop hoses, check the small safety valve inspection window. If the window is red, it means the water stop function was triggered, and the hose must be replaced with a new one. 5. To replace the hose, press the release button (if available) while unscrewing the hose from the water tap and the washing machine. 6. Install the new hose by connecting it tightly to the water tap and the washing machine. 7. Once the new hose is securely connected, switch on the washing machine and check for any leaks. Remember to always follow the safety instructions provided in the manual when dealing with the water supply hose.
To clean the mesh filters in the water supply hose of the Whirlpool FWF 81284W IT washing machine, follow these steps: 1. Close the water tap and unscrew the inlet hose from the washing machine. 2. Carefully clean the mesh filter at the end of the hose using a fine brush. 3. Unscrew the inlet hose on the back of the washing machine by hand. 4. Use pliers to pull out the mesh filter from the valve on the back of the washing machine and clean it thoroughly. 5. Insert the cleaned mesh filter back into the valve. 6. Reconnect the inlet hose to the water tap and the washing machine, ensuring all connections are tight. Do not use any tools to connect the hose. 7. Open the water tap and check that all connections are secure. These steps will help ensure that the mesh filters in the water supply hose are clean and free from any debris or blockages, allowing for proper water flow during the washing machine's operation.
To clean the detergent dispenser of the Whirlpool FWF 81284W IT washing machine if it is clogged, follow these steps: 1. Press the release button on the detergent dispenser and pull it out. 2. Remove the insert from the softener compartment. 3. Rinse all parts under running water to remove any detergent or softener residues. 4. Use a soft cloth to wipe the parts dry. 5. Reinstall the detergent dispenser by pushing it back into the detergent compartment. By following these steps, you can effectively clean the detergent dispenser and ensure that it is free from any clogs or blockages. This will help to maintain the proper functioning of the dispenser and ensure that your laundry is properly cleaned.
To clean the water filter and drain residual water from the Whirlpool FWF 81284W IT washing machine, follow these steps: 1. Switch off and unplug the washing machine before cleaning the water filter or draining residual water. Allow the water to cool down if you have used a hot wash program. 2. Remove the kick panel at the bottom of the washing machine using a screwdriver. 3. Place a low and wide container under the water filter to collect the residual water. 4. Slowly turn the water filter counter-clockwise to drain the water. Do not remove the filter completely. Close the filter by turning it clockwise once the container is full, and empty the container. Repeat this process until all the water has been drained. 5. Lay a cotton cloth beneath the water filter to absorb any remaining water. Remove the water filter by turning it anticlockwise. 6. Clean the water filter by removing any residues and rinsing it under running water. 7. Insert the cleaned water filter back into the washing machine by turning it clockwise. Ensure it is securely tightened. 8. Reinstall the kick panel. 9. To test the water tightness of the water filter, you can pour about 1 liter of water into the detergent dispenser. 10. Enjoy using your clean and properly functioning Whirlpool FWF 81284W IT washing machine. Please note that these instructions are specific to the Whirlpool FWF 81284W IT model and may differ for other models.
Yes, the manual of the Whirlpool FWF 81284W IT is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Whirlpool and is the answer not in the manual?
Question and answer
Number of questions: 0