Whirlpool FSCR10421 manual

Whirlpool FSCR10421
7.5 · 1
PDF manual
 · 52 pages
English
manualWhirlpool FSCR10421

Health & Safety, Use & Care and Installation guide

www.whirlpool.com.au

View the manual for the Whirlpool FSCR10421 here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Whirlpool FSCR10421 or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandWhirlpool
ModelFSCR10421
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool FSCR10421 below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

How to use the appliance for the first time?

To use the Whirlpool FSCR10421 washing machine for the first time, follow these steps: 1. Plug in the washing machine to automatically switch it on. 2. Select the "Cotton" program with a temperature of 95°C. 3. Add a small amount of heavy-duty detergent (up to 1/3 of the recommended quantity for lightly soiled laundry) to the main wash compartment. 4. Start the program without adding any laundry to familiarize yourself with the selection and start process. 5. Refer to the "Daily Use" instructions for further guidance. Remember to remove the transport bolts before using the machine to prevent damage. Keep young children away from the appliance and ensure it is installed correctly by following the manufacturer's instructions. Avoid using the appliance outdoors and store it in suitable environmental conditions.

Troubleshooting failure indicators and possible solutions?

1. If the water tap closed indicator is displayed, it may be due to no or insufficient water supply, a closed water tap, kinks in the inlet hose, low water tap pressure, clogged mesh filters in the inlet hose, or a frozen water inlet hose. To resolve this, open the water tap, ensure there are no kinks in the inlet hose, check water pressure, clean the mesh filters in the inlet hose, and install the washing machine in an ambient temperature of at least 5°C. 2. If the clean filter indicator appears, indicating that waste water is not being pumped out, check for kinks in the drain hose, blockages or freezing in the drain hose, a blocked filter, or a blocked pump. Resolve this issue by checking the drain hose for kinks, cleaning the water filter, and ensuring the washing machine is installed in an ambient temperature of at least 5°C. 3. If the door open indicator blinks, indicating that the door cannot lock, firmly press the door in the area of the door lock to properly close it. Then press Start/Pause to continue. If the problem persists, press On/Off for at least 3 seconds.

Is the manual of the Whirlpool FSCR10421 available in English?

Yes, the manual of the Whirlpool FSCR10421 is available in English .

Is your question not listed? Ask your question here

No results