Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 manual

Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3
8.2 · 1
PDF manual
 · 4 pages
English
manualWhirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3
5019 300 01130
ProgrammeTempe-ratureCare LabelsMax.
Load
kg
Type of wash/Notes- Respect the manufacturer’s recommendations on the care labelDetergents and additivesSelectable options Dosing
aid
Cycle
end
Spin
Pre-
wash
Main
wash
Softener Colours 15° plusBioStain
15°
Rapid Pre-
wash
Soil levelSpin Max. Spin Speed
rpm
Mixed cold - 60°C 4.0Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.Effective one-hour programme. Make sure to wash only similar colours together in one wash load.
—Yes ❉❉——❉❉ max.
Cotton cold - 95°C 8.0Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.
Yes ❉❉max.
Synthetics cold - 60°C 3.0Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.) or their blends with cotton.
Yes ❉❉max.
Delicates cold - 40°C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. Yes ❉❉——❉❉
1000
1)
Wool/Handwashcold - 40°C 1.0Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk (keep to care label!), linen, wool and viscose marked as handwashable.
—Yes ——❉❉
1000
1)
White cold - 60°C 8.0Normally to heavily soiled and robust white cotton laundry.Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.
—Yes ——❉❉ max.
Light colours cold - 60°C 4.0
White and pastel shaded garments made of delicate fabrics.Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis.
Yes ❉❉ ❉❉
1000
1)
Dark cold - 60°C 4.0Black and dark garments made of cotton, cotton blends and polyester.Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for dark garments with this programme.
Yes ❉❉
1000
1)
Speed 15 cold - 30°C 3.0Briefly worn clothing made of cotton, synthetic fibres and blends with cotton.Refresh programme. Use lowest recommended detergent amount.
—Yes ——❉❉ max.
AquaEco cold - 40°C 3.0Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for 3 kg laundry. Do not use softener.
—Yes — — ❉❉ max.
Cottoncold - 60°C 8.0Normally soiled cotton laundry.At 40°C and 60°C standard cotton programme and most favourable in terms of combined water and energy consumption for washing cotton laundry. - Reference programme for the Energy Label.
—Yes ——❉❉ max.
Eco monitor
%
+ Ok
A. “Door open” indicatorThis washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:B. “Service” indicatorC. “Water tap closed” indicatorD. “Clean pump” indicatorE. Programme selectorF. “Start/Pause” buttonG. “Temperature” buttonH. “Spin” button (incl. “Rinse hold”)I. “Cycle end” buttonJ. “Dosing Aid” buttonK. “Soil level” buttonL. Eco monitorM. “Reset/Drain” buttonN. Child lock button combinationO. Detergent overdosage indicator
F
I
K
M
H
}
J
N
G
E
D
C
B
A
L
O
}
/
Fabrics
Colours
Eco

EN PROGRAMME CHART

: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.

View the manual for the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 or do you need help? Ask your question here

Need help?

Do you have a question about the Whirlpool and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
F
Fatima May 7, 2024

My washing machine drum is full of water

The Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is a household appliance designed to efficiently and effectively clean laundry. It is equipped with advanced technology and features to make the laundry process more convenient. With a washing capacity of 6 kilograms, this washing machine can handle moderate-sized loads of laundry. It operates with a 1400 revolutions per minute (RPM) spin speed, which helps to extract more water from your clothes, reducing drying time. The 6TH SENSE technology uses sensors to automatically adjust the amount of water, energy, and time needed for each load, ensuring optimal performance and efficient resource usage. This feature helps to save both water and energy. The InfiniteCare feature is designed to gently clean delicate fabrics, such as silk and wool, by adjusting the drum rotation and water movement to prevent stretching or damage. This is particularly useful for maintaining the quality of your delicate garments. The Pure 184S3 washing machine offers a variety of wash programs, including quick wash, cotton, synthetic, wool, and delicates. Each program is tailored to different types of fabrics, ensuring the best possible care for your clothes. In terms of design, this washing machine has a modern and sleek appearance. It is equipped with a user-friendly control panel and an LED display to easily navigate and select the desired settings. Overall, the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is a reliable and efficient appliance for your laundry needs. With its advanced technology and tailored wash programs, it provides a convenient and effective solution for keeping your clothes clean and fresh.

General
BrandWhirlpool
Model6TH SENSE InfiniteCare 1400 Pure 184S3
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

How can I troubleshoot if the sensor technology of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is not adapting the program duration correctly?

To troubleshoot if the sensor technology of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is not adapting the program duration correctly, you can follow these steps: 1. Check the soil level: Make sure you have selected the appropriate soil level for your laundry. The sensor technology adapts the program duration based on the soil level selected. If the soil level is not set correctly, it may affect the program duration. 2. Verify the load size: Ensure that you have loaded the washing machine with the recommended load size. The sensor technology takes into account the load size to adjust the program duration. Overloading or underloading the machine can impact the sensor's ability to adapt the duration accurately. 3. Check for any obstructions: Inspect the drum and the detergent dispenser for any obstructions or blockages. If there are any items or detergent residue blocking the sensors, it may affect their ability to detect the load and adjust the program duration. 4. Clean the sensors: Clean the sensors located inside the washing machine according to the instructions provided in the manual. Dust or dirt on the sensors can interfere with their functioning and accuracy. 5. Restart the machine: If the sensor technology is still not adapting the program duration correctly, try restarting the washing machine. Turn off the machine, unplug it from the power source, wait for a few minutes, and then plug it back in. Restart the machine and see if the issue persists. By following these troubleshooting steps, you can address any issues with the sensor technology of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine not adapting the program duration correctly.

What should I do if the power consumption of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is higher than expected in certain modes?

If the power consumption of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is higher than expected in certain modes, you can try the following steps to troubleshoot the issue: 1. Check the selected program: Ensure that you have chosen the appropriate program for your laundry. Some programs may have higher power consumption due to their specific settings or features. Select a program that is suitable for your load and requirements. 2. Adjust the temperature: Lowering the temperature setting can help reduce power consumption. Use a lower temperature if it is suitable for the type of fabric and level of dirtiness of your laundry. 3. Reduce the load size: Overloading the washing machine can increase power consumption. Make sure you are not exceeding the recommended load size for the selected program. Distribute the laundry evenly in the drum to ensure efficient washing. 4. Use energy-saving options: Check if your washing machine has energy-saving options, such as eco mode or quick wash. These options can help reduce power consumption by adjusting the program duration or temperature. 5. Maintain the washing machine: Regularly clean the filters and ensure that the water inlet and drain hoses are not blocked. A well-maintained machine can operate more efficiently and consume less power. By following these steps, you can troubleshoot and potentially reduce the power consumption of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine in certain modes.

Why is the soil level and spin speed adjustment not working properly on the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine?

If the soil level and spin speed adjustment is not working properly on the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine, you can try the following steps to troubleshoot the issue: 1. Check the selected soil level: Ensure that you have chosen the appropriate soil level for your laundry. The soil level selection affects the program duration and detergent quantity recommendation. Make sure the soil level is set correctly according to the dirtiness of your laundry. 2. Verify the spin speed selection: Double-check the spin speed setting you have chosen. The spin speed determines how fast the drum spins during the final spin cycle. Ensure that you have selected the desired spin speed and that it is different from the default setting if you want to change it. 3. Check for any obstructions: Inspect the washing machine drum and detergent dispenser for any obstructions or blockages. Remove any items or detergent residue that may be interfering with the proper functioning of the soil level and spin speed adjustment. 4. Restart the machine: If the adjustment is still not working properly, try restarting the washing machine. Turn off the machine, unplug it from the power source, wait for a few minutes, and then plug it back in. Restart the machine and see if the issue persists. By following these steps, you can troubleshoot and address any issues with the soil level and spin speed adjustment on the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine.

What should I check if the delayed start function of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is not working as expected?

To troubleshoot if the delayed start function of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is not working as expected, you can check the following: 1. Ensure proper program selection: Make sure you have selected the desired program before setting the delayed start. The delayed start function works in conjunction with the chosen program, so ensure that the program is suitable for your laundry needs. 2. Verify the time setting: Double-check the time you have set for the delayed start. Press the delayed start button and select the desired time until the program should finish. Keep in mind that the available time segments are in full-hour increments. 3. Avoid using liquid detergent: When using the delayed start function, do not use liquid detergent. This function is not compatible with liquid detergent, so make sure to use powdered detergent instead. 4. Check for modifications: If you make any modifications to the program settings, such as selecting or deselecting options or changing the spin speed, ensure that the modifications do not prolong the program duration beyond the originally set time until the program should finish. 5. Restart the machine: If the delayed start function is still not working as expected, try restarting the washing machine. Turn off the machine, unplug it from the power source, wait for a few minutes, and then plug it back in. Restart the machine and set the delayed start again. By following these steps, you can troubleshoot and address any issues with the delayed start function of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine.

How can I troubleshoot if the dosing aid feature of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is not dispensing the recommended detergent quantity correctly?

To troubleshoot if the dosing aid feature of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine is not dispensing the recommended detergent quantity correctly, you can follow these steps: 1. Check detergent compatibility: Ensure that you are using detergent that is compatible with the dosing aid feature. The dosing aid function works best with powdered detergent. Make sure the detergent you are using is suitable for the dosing aid feature and the water hardness level in your region. 2. Adapt the washing machine settings: Before using the dosing aid feature, adapt the washing machine to the recommended dosing amounts for the detergents you use. Check the manual for instructions on how to adjust the dosing amounts based on the detergent and water hardness level. 3. Select program, options, and cycle end: Before using the dosing aid button, select the desired program, options, and cycle end. Ensure that you have chosen the appropriate settings for your laundry. 4. Use the dosing aid button: Press the dosing aid button to activate the feature. The washing machine will indicate the recommended detergent quantity for your wash load based on the selected soil level and load size. Follow the displayed recommendation to add the correct amount of detergent. By following these steps, you can troubleshoot and ensure that the dosing aid feature of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 washing machine dispenses the recommended detergent quantity correctly.

Is the manual of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 available in English?

Yes, the manual of the Whirlpool 6TH SENSE InfiniteCare 1400 Pure 184S3 is available in English .

Is your question not listed? Ask your question here

No results