Welch Allyn AED 20 manual

Welch Allyn AED 20
9.2 · 2
PDF manual
 · 155 pages
English
manualWelch Allyn AED 20
AED 20

View the manual for the Welch Allyn AED 20 here, for free. This manual comes under the category defibrillators and has been rated by 2 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Welch Allyn AED 20 or do you need help? Ask your question here

Need help?

Do you have a question about the Welch Allyn and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandWelch Allyn
ModelAED 20
Productdefibrillator
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Welch Allyn AED 20 below.

How does the Welch Allyn AED20 determine if a shockable situation exists?

The Welch Allyn AED20 determines if a shockable situation exists by analyzing the patient's cardiac rhythm. If the rhythm is deemed shockable, the device will indicate "Shock advised" through text and voice alerts. In contrast, if the rhythm is non-shockable, the device will display "No shock advised" to the user. Before delivering a shock, ensure that the Shock button is flashing, indicating proper charging. It is crucial to ensure that no one is in contact with the patient before pressing the Shock button. Once a shock is administered, the AED20 continues to analyze the heart rhythm to determine if additional shocks are necessary, following a predefined protocol for shock delivery and potential CPR interventions.

What should I do if the Welch Allyn AED20 does not automatically arm the Shock button when a shockable situation is detected?

If the Welch Allyn AED20 does not automatically arm the Shock button when a shockable situation is detected, follow these steps: 1. Stand clear and press the red Shock button immediately. 2. Ensure that the Shock button next to the number "3" is flashing, indicating proper charging. 3. Push the Shock button to deliver a shock. 4. Make sure no one is touching the patient before pressing the Shock button. Announce loudly to stand back and ensure no contact with the patient. 5. After delivering a shock, the AED20 will continue to analyze the heart rhythm and prompt for additional shocks if needed.

How should I handle the defibrillation pads to ensure proper placement and avoid burns during defibrillation with the Welch Allyn AED20?

To ensure proper placement and avoid burns during defibrillation with the Welch Allyn AED 20 defibrillator, follow these steps: 1. Open the package containing the defibrillation pads and cable. 2. Peel off the backing from the electrode pad labeled RA. 3. Place this pad just below the patient’s right collar bone (sternum). 4. Do not allow defibrillation pads to touch each other or other ECG electrodes, lead wires, dressings, or transdermal patches to prevent patient skin burns and diverting current away from the heart. 5. Remove excessive body hair to avoid skin burns or ineffective energy transfer. 6. Use only Welch Allyn electrode monitoring cables to prevent burns to the patient. 7. Before charging the defibrillator, verify the selected energy on the display is the desired output. 8. Disconnect any medical electronic device not labeled before defibrillation.

Is the manual of the Welch Allyn AED 20 available in English?

Yes, the manual of the Welch Allyn AED 20 is available in English .

Is your question not listed? Ask your question here

No results