Hardware Guide 5
Hard ware S pec ific ati ons
AC Power Adapter The AC power ada pter supplies powe r for the Firebox. A Firebox shipped outside the U.S. includes four power
cables to connect to the AC power adapter. Use the correct powe r cable for the powe r source used in your
country.
Caution Do not connect this power adapter to any other WatchGuard product.
Wall Mounting Plate The wall mounting plate (available separately) enables you to mount the Fire box on a wall in a good location
to increase the wireless range.
To install the wal l mounting plate:
1. Place the wall mounting plate horizontally against the wall wh ere you want to install th e Firebox.
2. Securely screw the wa ll mounting pl ate to the wa ll with four screws 1/8" (3 mm) wide and at leas t 3/4"
(18 mm) long.
3. Align the two holes on the bottom of the Firebox with the two conne ction points on the mountin g
plate.
4. Push the Firebox toward the mounting plate, until the two connection points on the mounting plate
are inside the hole s on the bottom of the Firebox. The n press firmly down to seat t he device on the
plate.
To remove the Firebox from the mounting plate, push the Firebox up slightly, and then pull out, to separate
the connection points on the mounting plate from the holes on the bottom of the Firebox.
Environmental Requirements To safely install your Firebox, we recommend that you:
Install it indoors.
Put it in a secure are a, such as a locked room, to block the device from people who do not have
permission to use it
Connect it to a conditioned power supply to prevent damage from sudden power changes
Other environmental requirements:
Operating temperature 0 – 40°C (32 – 104°F)
Operating relative humidity 5% - 90% Non-conden sing
Non-operating te mperature –40 – 70°C ( –40 – 158°F)
Non-operating re lative humidity 5% – 90% Non- condensing
Need help?
Do you have a question about the WatchGuard and is the answer not in the manual?
Question and answer
Number of questions: 0