VIZIO P65-C1 manual

VIZIO P65-C1
6.7 · 1
PDF manual
 · 78 pages
English
manualVIZIO P65-C1
ii

Safety Information

IMPORTANT SAFETY INSTRUCTIONS - P-SERIES DISPLAY
Your display is designed and manufactured to operate within dened design limits. Misuse may result in electric shock or
re. To prevent your display from being damaged, the following instructions should be observed for the installation, use, and
maintenance of your display. Read the following safety instructions before operating your display. Keep these instructions in a
safe place for future reference.
To reduce the risk of electric shock or component damage, switch o the power before connecting other components to your display.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce
heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Unplug the power cord before cleaning your display.
When moving your display from an area of low temperature to an area of high temperature, condensation may form in the housing.
Wait before turning on your display to avoid causing re, electric shock, or component damage.
A distance of at least three feet should be maintained between your display and any heat source, such as a radiator, heater, oven,
amplier etc. Do not install your display close to smoke. Operating your display close to smoke or moisture may cause re or electric
shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your display
and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your display in a bookcase or
cabinet unless proper ventilation is provided.
Never push any object into the slots and openings on your display cabinet. Do not place any objects on the top of your display. Doing
so could short circuit parts causing a re or electric shock. Never spill liquids on your display.
Your display should be operated only from the type of power source indicated on the label. If you are not sure of the type of power
supplied to your home, consult your dealer or local power company.
Do not apply pressure or throw objects at your display. This may compromise the integrity of the display. The manufacturer’s
warranty does not cover user abuse or improper installations.
The power cord must be replaced when using dierent voltage than the voltage specied. For more information, contact your dealer.
When connected to a power outlet, power is always owing into your display. To totally disconnect power, unplug the power cord.
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated,
dangerous voltage within the inside of your display that may be of sucient magnitude to constitute a risk of electric shock to
persons.
Do not overload power strips and extension cords. Overloading can result in re or electric shock.
The wall socket should be installed near your display and easily accessible.
Only power of the marked voltage can be used for your display. Any other voltage than the specied voltage may cause re or
electric shock.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug your display during a lightning storm or when it will not be used for long period of time. This will protect your display from
damage due to power surges.
Do not attempt to repair or service your display yourself. Opening or removing the back cover may expose you to high voltages,
electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualied service personnel.
WARNING: Keep your display away from moisture. Do not expose your display to rain or moisture. If water penetrates into your
display, unplug the power cord and contact your dealer. Continuous use in this case may result in re or electric shock.
Do not use your display if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your
dealer immediately. Do not try to repair your display yourself.
Avoid using dropped or damaged appliances. If your display is dropped and the housing is damaged, the internal components may
function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your display may
cause re or electric shock.
Do not install your display in an area with heavy dust or high humidity. Operating your display in environments with heavy dust or
high humidity may cause re or electric shock.
Follow instructions for moving your display. Ensure that the power cord and any other cables are unplugged before moving your
display.
When unplugging your display, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside
the cord and cause re or electric shock. When your display will not be used for an extended period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote
control or injure the operator. Do not expose batteries to excessive heat such as sunshine, re or the like.
If any of the following occurs, contact the dealer:
The power cord fails or frays.
Liquid sprays or any object drops into your display.
Your display is exposed to rain or other moisture.
Your display is dropped or damaged in any way.
The performance of your display changes substantially.
This apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the
apparatus.
The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
CAUTION - These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions unless you are qualied to do so.
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sucient magnitude to constitute
a risk of electrical shock to persons.
Please use caution around the display: pulling or pushing on the display may cause the display to tip or fall over
resulting in personal injury and/or property damage.
This apparatus is intended to be supported by a UL Listed Wall Mount Bracket or the equivalent.
h

Manual

View the manual for the VIZIO P65-C1 here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the VIZIO P65-C1 or do you need help? Ask your question here

Need help?

Do you have a question about the VIZIO and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
I
IrmaJanuary 13, 2024

My 65" has lines on left side only

VIZIO P65-C1 specifications

Below you will find the product specifications and the manual specifications of the VIZIO P65-C1.

The VIZIO P65-C1 is a 65-inch television that offers a high-definition viewing experience with its 4K Ultra HD display resolution of 3840 x 2160 pixels. This Smart TV allows users to access a wide range of streaming services and online content. Equipped with eight processor cores, the VIZIO P65-C1 delivers fast and smooth performance. The television also features Local Dimming backlight dimming technology, which enhances picture quality by adjusting the brightness of different areas of the screen. The VIZIO P65-C1 has built-in Wi-Fi and Bluetooth capabilities, enabling users to connect to the internet wirelessly and easily pair with other devices. The television supports video compression formats such as HEVC, as well as video formats like H.265 and VP9. With five HDMI ports, users can connect multiple devices to the television, such as gaming consoles, Blu-ray players, and sound systems. The HDMI version is compatible with both 1.4 and 2.0. Additionally, the television has a component video (YPbPr/YCbCr) input. Overall, the VIZIO P65-C1 offers a large and high-quality display with 4K Ultra HD resolution. It provides convenient access to online content through Smart TV features, and its eight processor cores ensure fast and efficient performance. The Local Dimming backlight technology enhances picture quality, while the multiple HDMI ports allow for easy connection of various devices.

General
BrandVIZIO
ModelP65-C1 | P65-C1
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal65 "
Display resolution3840 x 2160 pixels
HD type4K Ultra HD
LED backlighting typeFull-Array
Native refresh rate240 Hz
Contrast ratio (dynamic)50000000:1
Viewing angle, vertical178 °
Viewing angle, horizontal178 °
Display technologyLED
Display brightness- cd/m²
Response time- ms
Motion interpolation technology-
Screen shapeFlat
Native aspect ratio16:9
Smart TV
Smart TVYes
Internet TVYes
Performance
Processor cores8
Local Dimming
Video compression formatsHEVC
Video formats supportedH.265, VP9
Ambient light sensorYes
Teletext function-
High Dynamic Range (HDR) supportedYes
Network
Wi-FiYes
Wi-Fi standardsWi-Fi 5 (802.11ac)
BluetoothYes
Ethernet LANYes
Ports & interfaces
HDMI ports quantity5
HDMI version1.4/2.0
Component video (YPbPr/YCbCr) in1
Ethernet LAN (RJ-45) ports1
USB 2.0 ports quantity2
PC in (D-Sub)-
DVI port-
DVI-D ports quantity-
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity-
Headphone outputs-
Common interface (CI)-
Common interface Plus (CI+)-
S-Video inputs quantity-
Management features
On Screen Display (OSD)Yes
On Screen Display (OSD) languagesENG, ESP, FRE
Other features
Built-in speaker(s)Yes
Batteries includedYes
Battery typeAAA
3DNo
Audio
Number of speakers2
RMS rated power20 W
Audio decodersDTS, DTS Studio Sound, DTS TruVolume
Power
Power consumption (typical)122 W
Power consumption (standby)0.5 W
Design
VESA mountingYes
Panel mounting interface400 x 400 mm
Product colorSilver
On/off switch-
Packaging content
Handheld remote controlYes
Remote control typeXRT132
Weight & dimensions
Width (with stand)1459 mm
Height (with stand)899 mm
Depth (with stand)286 mm
Height (without stand)838 mm
Width (without stand)1459 mm
Depth (without stand)64 mm
Weight (with stand)28299 g
Weight (without stand)27850 g
Packaging data
Package width1720 mm
Package height979 mm
Package depth227 mm
Package weight39099 g
TV tuner
Analog signal format system-
Digital signal format system-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the VIZIO P65-C1 below.

What's the best viewing distance for my VIZIO television?

The ideal viewing distance for your VIZIO television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the screen size of the VIZIO P65-C1?

The screen size of the VIZIO P65-C1 is 65 ".

What is the screen resolution of the display of the VIZIO P65-C1?

The screen resolution of the VIZIO P65-C1 is 3840 x 2160 pixels.

Does the VIZIO P65-C1 have a display size of 65 inches?

Yes, the VIZIO P65-C1 has a display diagonal of 65".

Is the VIZIO P65-C1 a smart TV?

Yes, the VIZIO P65-C1 is a smart TV, which means users can access online content and streaming services.

What is the display resolution of the VIZIO P65-C1?

The display resolution of the VIZIO P65-C1 is 3840 x 2160 pixels, which is 4K Ultra HD. This provides a highly detailed and sharp image quality.

How many HDMI ports does the VIZIO P65-C1 have?

The VIZIO P65-C1 has a total of 5 HDMI ports, allowing users to connect multiple devices simultaneously, such as gaming consoles, streaming devices, and Blu-ray players.

Does the VIZIO P65-C1 support wireless connectivity?

Yes, the VIZIO P65-C1 has Wi-Fi and Bluetooth capabilities, providing users with the flexibility to connect wirelessly to the internet, as well as pair with other compatible devices such as smartphones or speakers.

How do I pair the tablet remote with the VIZIO P65-C1 television?

To pair the tablet remote with the VIZIO P65-C1 television, follow these steps: 1. Turn on the P-Series Display by pressing the Power button on the back of the Display or by using the Power button on the Basic Remote Control. 2. Turn on the Tablet Remote by pressing and holding the Power button for a few seconds. 3. On the Tablet Remote, tap "Get Started" to begin the First-Time Setup. 4. Select your language and tap "Next" to continue. 5. Hold the Tablet Remote close to the VIZIO logo on the bottom right corner of the display for a few seconds. By following these steps, you will successfully pair the tablet remote with your VIZIO P65-C1 television.

Why is the SmartCast™ App not working on my VIZIO P65-C1 television?

If the SmartCast™ App is not working on your VIZIO P65-C1 television, you can try the following steps: 1. Ensure that your television is connected to the internet. Check the network settings on your television and make sure it is connected to a stable internet connection. 2. Update the SmartCast™ App to the latest version. Go to the app store on your tablet or smartphone and check for any available updates for the SmartCast™ App. Install any updates if available. 3. Restart your television and the device running the SmartCast™ App. Turn off your television and unplug it from the power source. Also, close the SmartCast™ App on your device and restart it. 4. Check if there are any firmware updates available for your VIZIO P65-C1 television. Go to the settings menu on your television and look for the firmware update option. If an update is available, follow the on-screen instructions to install it. 5. If the issue persists, try uninstalling and reinstalling the SmartCast™ App on your device. Delete the app from your device and download it again from the app store. By following these steps, you may be able to resolve the issue with the SmartCast™ App not working on your VIZIO P65-C1 television.

How can I adjust the picture settings on my VIZIO P65-C1 television?

To adjust the picture settings on your VIZIO P65-C1 television, follow these steps: 1. Access the Picture settings menu by either: - From the Display Settings menu, tap on "Picture". The Picture menu will be displayed. - From the Device Menu, tap on the button. The Display Settings menu will be displayed. Then tap on "Picture" to access the Picture menu. 2. In the Picture menu, you will find different picture modes to choose from: - Standard mode: Sets the picture settings to the default settings. - Calibrated mode: Sets the picture settings to values ideal for watching TV in a brightly-lit room. - Calibrated Dark mode: Sets the picture settings to values ideal for watching TV in a dark room. - Vivid mode: Sets the picture settings to values that produce a brighter, more vivid picture. - Game mode: Reduces throughput delays and optimizes the picture settings for displaying game console output. - Computer mode: Optimizes the picture settings for displaying computer output. 3. To adjust the picture settings, tap on each setting to see the available options. Use the sliders to adjust the settings by sliding your finger left to decrease and right to increase. 4. One of the available settings is the Auto Brightness Control. You can select "Off", "Low", "Medium", or "High". This feature detects the light levels in the room using the ambient light sensor and automatically adjusts the backlight for the best picture. By following these steps, you can adjust the picture settings on your VIZIO P65-C1 television to suit your preferences and viewing conditions.

Why is the audio not working properly on my VIZIO P65-C1 television?

If the audio is not working properly on your VIZIO P65-C1 television, you can try the following steps: 1. Access the Audio settings menu by either: - From the Display Settings menu, tap on "Audio". The Audio menu will be displayed. - From the Device Menu, tap on the button. The Display Settings menu will be displayed. Then tap on "Audio" to access the Audio menu. 2. In the Audio menu, you will find various audio settings that you can adjust: - Speakers (Display Speakers): This option allows you to turn the built-in speakers on or off. Select "Auto" to have the display automatically detect if there are any devices, such as a soundbar, connected to the Audio Out output ports. - Surround Sound: This option enables or disables surround sound using DTS TruSurround™ technology to deliver an immersive surround sound experience from the display's internal speakers. - Volume Leveling: This option uses DTS TruVolume™ to maintain consistent volume levels during transitions between program content, AV formats, and input sources. - Balance: This option adjusts the loudness of the audio output from the left and right speakers. - Lip Sync: This option adjusts the synchronization between the display image and the accompanying audio track. - Digital Audio Out: This option changes the type of processing for digital audio out and HDMI ARC output when connected to a home theater audio system. - Analog Audio Out: This option sets the volume control properties for the RCA connector when connected to a home theater audio system. - Mute: This option mutes all audio from the display. By adjusting these audio settings, you may be able to resolve any issues with the audio not working properly on your VIZIO P65-C1 television.

How do I set up additional SmartCast devices on my VIZIO P65-C1 television?

To set up additional SmartCast devices on your VIZIO P65-C1 television, follow these steps: 1. From the Home page, tap on the button and select "Device Settings". 2. The VIZIO Devices menu will be displayed. Tap on "ADD NEW DEVICE". 3. Follow the on-screen instructions to pair your SmartCast device with your VIZIO P65-C1 television. By following these steps, you can successfully set up additional SmartCast devices and connect them to your VIZIO P65-C1 television.

Is the manual of the VIZIO P65-C1 available in English?

Yes, the manual of the VIZIO P65-C1 is available in English .

Is your question not listed? Ask your question here

No results