VIZIO M370SR manual

VIZIO M370SR
9 · 1
PDF manual
 · 53 pages
English
manualVIZIO M370SR
20
5
M370SR/M420SR
To connect to a wireless network whose network name (SSID) is not being
broadcast:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the Network icon and
press OK. The Network Connection
menu is displayed.
3. Highlight Enter Access Point Name
and press OK.
4. Using the QWERTY Keypad on the
remote, enter your network’s name
(SSID), then highlight Connect and
press OK. (If you would like to use the
on-screen keyboard instead, highlight
Show Keyboard and press OK.)
5. Using the QWERTY Keypad on
the remote, enter your network’s
password, then highlight Connect and
press OK. (If you would like to use the
on-screen keyboard instead, highlight
Show Keyboard and press OK.)
6. Press the EXIT button on the remote.
Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the Manual Setup
feature.
To change advanced network settings:
1. From the Network Connection menu,
highlight Manual Setup and press
OK. The Change Settings menu is
displayed.
2. Use the Arrow and OK buttons to
adjust each setting:
• DHCP-(DynamicHost
CongurationProtocol)Thissetting
mustbeturnedOfftochangeany
oftheothersettings.
• IP Address-TheIPaddress
assignedtotheTV.
• Subnet Mask-Thesubnetmask.
• Default Gateway-Yournetwork’s
defaultgatewayaddress.
• Pref. DNS Server-Yourpreferred
domainnameserveraddress.
• Alt DNS Server -Youralternatedomainnameserveraddress.
3. If you need the RJ45 (ethernet) MAC address or the Wireless MAC address
to set up your network, these are displayed at the bottom of the Change
Settings menu.
4. Press the EXIT button on the remote.
Testing Your Network Connection
To test your network connection:
1. From the Network Connection menu, highlight Test Connection and press
OK.
2. The Test Connection screen displays the connection method, network
name, signal strength, and download speed of your network connection.
3. Press the EXIT button on the remote.
IP Setting
DHCP Off
IP Address
. . .
. . .
. . .
. . .
. . .
Subnet Mask
Default
Gateway
Pref. DNS
Server
Alt. DNS
Server
RJ45 MAC
Wireless MAC
0:0:0:0:0:0
FF:FF:FF:FF:FF:FF
Dynamic Host Configuration Protocol.
Select “Off” to enter static IP

Manual

View the manual for the VIZIO M370SR here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the VIZIO M370SR or do you need help? Ask your question here

Index

Need help?

Do you have a question about the VIZIO and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

VIZIO M370SR specifications

Below you will find the product specifications and the manual specifications of the VIZIO M370SR.

General
BrandVIZIO
ModelM370SR
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the VIZIO M370SR below.

What's the best viewing distance for my VIZIO television?

The ideal viewing distance for your VIZIO television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the VIZIO M370SR available in English?

Yes, the manual of the VIZIO M370SR is available in English .

Is your question not listed? Ask your question here

No results