Vivotek FD9367-EHTV manual

Vivotek FD9367-EHTV
5.7 · 1
PDF manual
 · 388 pages
English
manualVivotek FD9367-EHTV
VIVOTEK
User's Manual - 143

Applications > Tampering detection

This section explains how to set up camera tamper detection. With tamper detection, the
camera is capable of detecting incidents such as redirection, blocking or defocusing, or
even spray paint.
Please follow the steps below to set up the camera tamper detection function:
1. Click to select the checkbox before tampering conditions: Tampering detection, Image
too dark, Image too bright, and Image too blurry. Enter the tamper trigger duration.
(10 sec. ~ 10 min.). The duraction specifies the set of time before the tampering is
considered as a real alarm. This helps avoid false alarms by short-lived changes.
The tamper alarm will be triggered only when the tampering factor (the difference
between current frame and pre-saved background) exceeds the trigger threshold.
Conditions such as image too dark, too bright, or too blurry (defocused) can also be
configured as tampering conditions. The Trigger threshold determines how sensitive
your is tamper detection setting. Lower the threshold number, easier to trigger.
Too bright: shining a flash light. The average lighting level of the scene is taken into
consideration.
Too dark: covering the objective or spraying paint.
Too blurry: blurry scene can be the result of strong interference on the device, such as
EMI interference.
2. You can configure Tampering Detection as a trigger element to the proactive event
congurations in Event -> Event settings -> Trigger. For example, when the camera is
tampered with, camera can be congured to send the pre- and post-event video clips to
a networked storage device. Please refer to page 126 for detailed information.

Manual

View the manual for the Vivotek FD9367-EHTV here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Vivotek FD9367-EHTV or do you need help? Ask your question here

Need help?

Do you have a question about the Vivotek and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Vivotek FD9367-EHTV specifications

Below you will find the product specifications and the manual specifications of the Vivotek FD9367-EHTV.

General
BrandVivotek
ModelFD9367-EHTV | FD9367-EHTV
Productsecurity camera
EAN4712123678283
LanguageEnglish
FiletypeUser manual (PDF)
Performance
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
PTZ controlYes
PTZ modesDigital PTZ
Wide Dynamic Range (WDR)Yes
Day/night modeYes
Remote viewingYes
Infrared (IR) cut-off filterYes
CertificationCE, LVD, FCC Class A, VCCI, C-Tick, UL
Plug and PlayYes
Design
Form factorDome
Mounting typeCeiling
Product colorBlack, White
LED indicatorsPower, Status
International Protection (IP) codeIP66
IK codeIK10
WeatherproofYes
Camera
Camera pan controlYes
Camera tilt controlYes
Minimum illumination0 lx
Angle of rotation180 °
97 °
53 °
114 °
Tilt angle range0 - 80 °
Pan range0 - 350 °
Camera shutter speed1/5 - 1/32000 s
Image sensor
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.8 "
Progressive scanYes
Lens system
Number of lenses1
Zoom capabilityYes
Digital zoom48 x
FocusMotorized
Maximum aperture number2.8
Minimum aperture number1.4
Focal length range2.8 - 12 mm
Night vision
Night visionYes
Night vision distance30 m
LED typeIR
Number of illumination LEDs4
Video
Maximum resolution1920 x 1080 pixels
Total megapixels2 MP
Video compression formatsH.264, H.265, M-JPEG
Supported graphics resolutions1920 x 1080 (HD 1080)
Frame rate30 fps
Video streamingYes
Noise reductionYes
Gain control typeAuto
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Flip & mirrorYes
Noise reduction technology3D noise reduction
Privacy maskingYes
Time stamp overlayYes
Text caption overlayYes
Image stabilizerYes
Back Light Compensation (BLC)Yes
Digital Wide Dynamic Range (DWDR)Yes
Region of Interest (ROI) encodingYes
Audio
Audio system2-way
Built-in microphoneYes
Voice codecsG.711, G.726
Audio detectionYes
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Ethernet interface typeFast Ethernet
Networking standardsIEEE 802.1x
Supported network protocolsIPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, CIFS/SMB, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL/TLS
Quality of Service (QoS) supportYes
Number of users10 user(s)
Streaming methodMulticast
Storage
Built-in HDDNo
Card reader integratedYes
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Flash memory128 MB
Internal memory512 MB
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Terminal block portYes
DC-in jackYes
Security
Video motion detectionYes
Active tampering alarmYes
Motion sensorYes
Anti-flickerYes
HeartbeatYes
MirrorYes
Digital watermarkYes
Management features
Web-based managementYes
Web browserYes
Firmware upgradeableYes
Remotely operatedYes
Power
Power source typeDC, PoE
Power consumption (max)25 W
DC output voltage12
Operational conditions
Operating temperature (T-T)-40 - 50 °C
Storage temperature (T-T)-50 - 50 °C
Operating relative humidity (H-H)0 - 90 %
Storage relative humidity (H-H)0 - 90 %
System requirements
Windows operating systems supportedWindows 7, Windows 8
Weight & dimensions
Diameter155 mm
Height104 mm
Weight873 g
Packaging content
Number of cameras1
Screws includedYes
ManualYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Vivotek FD9367-EHTV below.

What is the weight of the Vivotek FD9367-EHTV?

The Vivotek FD9367-EHTV has a weight of 873 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What certifications does the Vivotek FD9367-EHTV have?

The Vivotek FD9367-EHTV has the following certifications: CE, LVD, FCC Class A, VCCI, C-Tick, UL.

What is the height of the Vivotek FD9367-EHTV?

The Vivotek FD9367-EHTV has a height of 104 mm.

Is the manual of the Vivotek FD9367-EHTV available in English?

Yes, the manual of the Vivotek FD9367-EHTV is available in English .

Is your question not listed? Ask your question here

No results