Vivo LCDTV55FHD manual

Vivo LCDTV55FHD
8.6 · 1
PDF manual
 · 17 pages
English
manualVivo LCDTV55FHD
In order to receive TV programs emitted by satellite, a satellite
receiver should be connected to the rear of the LCD TV. Mean
while, in order to receive encoded emit signal, a decoder should
be connected to the rear of LCD TV.
Using the coaxial cable
Connect the coaxial cable connectors to

The decoder output terminal.

The antenna input terminal.

If you want to connect the TV to satellite receiver (or decoder) and
video recorder at the same time, the following operation should be
followed:

Connect receiver (or decoder) to video recorder.

Connect video recorder to LCD TV, or connect receiver (or decoder)

directly to LCD TV.
In order to receive TV programs, signal should be received
from one of the following signal sources:
Outdoor antenna.
Cable TV network.
Satellite broadcast network.
1. In these three cases, the input cable of antenna or TV network
should be plugged in the 75 Ohm coaxial cable jack at the rear
side of LCD TV.
2. If you are using indoor antenna and the effect of TV program is
not satisfactory, you can adjust the position of the antenna until
the picture is clear.
When installing LCD TV, please use special 75 Ohm coaxial Cable.
If other coaxial cable is used, there may be noise and image
disturbances.

Connecting to Satellite Receiver or Decoder

Connecting to Satellite Receiver or Decoder

Time
Auto
Auto
satellite receiver/decoder
the rear of LCD TV
AV2 IN R2 L2
AV1 IN R1 L1
daylight savi ng ti me
daylight savi ng ti me
Auto
daylight savi ng ti me
Daylight saving time
Press the " / " button to select the "Daylight
saving time" item, and then use " / " button to
select the daylight saving time mode.

Manual

View the manual for the Vivo LCDTV55FHD here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Vivo LCDTV55FHD or do you need help? Ask your question here

Need help?

Do you have a question about the Vivo and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Vivo LCDTV55FHD specifications

Below you will find the product specifications and the manual specifications of the Vivo LCDTV55FHD.

General
BrandVivo
ModelLCDTV55FHD
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Vivo LCDTV55FHD below.

What's the best viewing distance for my Vivo television?

The ideal viewing distance for your Vivo television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Is the manual of the Vivo LCDTV55FHD available in English?

Yes, the manual of the Vivo LCDTV55FHD is available in English .

Is your question not listed? Ask your question here

No results