View the manual for the Vivitek Qumi Q8 here, for free. This manual comes under the category video projectors and has been rated by 1 people with an average of a 5.2. This manual is available in the following languages: English. Do you have a question about the Vivitek Qumi Q8 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Vivitek Qumi Q8.




| Brand | Vivitek |
| Model | Qumi Q8 | Q8-WH |
| Product | video projector |
| EAN | 0813097022226 |
| Language | English |
| Filetype | User manual (PDF) |
| Projector brightness | 1000 ANSI lumens |
| Projection technology | DLP |
| Projector native resolution | 1080p (1920x1080) |
| Contrast ratio (typical) | 30000:1 |
| Native aspect ratio | 16:9 |
| Supported aspect ratios | 16:9 |
| Screen size compatibility | 40 - 120 " |
| Projection distance | 1.33 - 4 m |
| Keystone correction, horizontal | -10 — 10 ° |
| Keystone correction, vertical | -30 - 30 ° |
| Noise level | 34 dB |
| Noise level (economic mode) | 31 dB |
| Built-in speaker(s) | Yes |
| RMS rated power | 2 W |
| Number of built-in speakers | 1 |
| Video formats supported | AVI, DAT, MKV, MOV, MP4, MPEG, MPG, TS, VOB, WMV |
| Image formats supported | BMP, JPEG |
| Audio formats supported | ADPCM, MP1, MP2, MP3, OGG, WAV, WMA |
| Service life of light source | 30000 h |
| Light source type | LED |
| Focus | - |
| Focal length range | - mm |
| Fixed focal length | 15.8 mm |
| Throw ratio | 1.5:1 |
| Zoom ratio | 1:1 |
| Offset | 110 % |
| Product type | Standard throw projector |
| Product color | Black, White |
| Market positioning | Portable |
| Built-in display | No |
| Analog signal format system | - |
| Full HD | Yes |
| 3D | - |
| Power source | AC |
| Power consumption (typical) | 55 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (economy mode) | 45 W |
| AC input frequency | 50 - 60 Hz |
| AC adapter output voltage | 100 - 240 V |
| VGA (D-Sub) ports quantity | - |
| HDMI ports quantity | 1 |
| Composite video in | - |
| Component video (YPbPr/YCbCr) in | - |
| DVI port | - |
| S-Video inputs quantity | - |
| USB 2.0 ports quantity | 1 |
| Audio (L/R) in | - |
| Audio (L/R) out | 1 |
| Serial interface type | - |
| Mobile High-Definition Link (MHL) | Yes |
| Weight | 621 g |
| Width | 190 mm |
| Depth | 114 mm |
| Height | 43 mm |
| Smart TV | - |
| Ethernet LAN | No |
| Ethernet LAN (RJ-45) ports | - |
| Wi-Fi | No |
| Card reader integrated | No |
| Handheld remote control | Yes |
| Batteries included | Yes |
| Cables included | AC, HDMI |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Vivitek Qumi Q8 below.
The Vivitek Qumi Q8 has a weight of 621 g.
The Vivitek Qumi Q8 has a height of 43 mm.
The Vivitek Qumi Q8 has a width of 190 mm.
The Vivitek Qumi Q8 has a depth of 114 mm.
The Vivitek Qumi Q8 has a projector brightness of 1000 ANSI lumens. This is considered to be on the lower side compared to other video projectors, but it can still provide a decent level of brightness for small to medium-sized rooms.
Yes, the Vivitek Qumi Q8 has a built-in speaker with a RMS rated power of 2 W. While this speaker may not offer the highest audio quality, it is suitable for basic sound needs during presentations or watching videos.
The Vivitek Qumi Q8 has a native resolution of 1080p (1920x1080). This means that it can display Full HD content, providing sharp and detailed images for a superior viewing experience compared to lower resolution projectors.
The Vivitek Qumi Q8 has a contrast ratio of 30000:1. This high contrast ratio allows for greater differentiation between light and dark areas of the projected image, resulting in more vibrant and impactful visuals.
The Vivitek Qumi Q8 has a service life of the light source of 30000 hours. This is an impressive lifespan, meaning that users can enjoy the projector for a long time without needing to replace the light source.
To adjust the trapezoidal correction on the Vivitek Qumi Q8 video projector, follow these steps: 1. Open the OSD (On-Screen Display) menu. 2. Use the left or right arrow button to select the "Weergave" (Display) menu and press the OK button. 3. Use the up or down arrow button to navigate within the "Weergave" menu. 4. Use the left or right arrow button to adjust the values for each applicable setting. - To perform vertical trapezoidal correction, use the left or right arrow button to select "V. trapeziumcorrectie" and adjust the value. - To perform horizontal trapezoidal correction, use the left or right arrow button to select "H. trapeziumcorrectie" and adjust the value. - To adjust the four corners of the image, press the OK button and use the up, down, left, or right arrow button to adjust each corner individually. 5. If available, you can also enable or disable automatic vertical trapezoidal correction by selecting "Autom. V. trapeziumcorrectie" and using the left or right arrow button. 6. Once you have made the desired adjustments, exit the OSD menu. Please note that the above instructions are based on the Vivitek Qumi Q8 video projector manual.
When the image is not displaying properly when you connect your digital camera or USB storage device to the Vivitek Qumi Q8 video projector, there could be a few possible reasons. Here are some troubleshooting steps you can try: 1. Ensure that the digital camera or USB storage device is properly connected to the Qumi projector. Check the cables and connections to make sure they are secure. 2. Verify that the digital camera or USB storage device is compatible with the Qumi projector. Refer to the supported formats in the manual to ensure that the image file format is supported. 3. Check the resolution settings on the Qumi projector. Make sure that the resolution matches the resolution of the image file. You can adjust the resolution in the projector's settings menu. 4. If the image is still not displaying properly, try accessing the "Foto" (Photo) menu on the Qumi projector. Use the arrow buttons on the remote control to select the desired image and press the OK button to display it. 5. If the issue persists, try connecting a different digital camera or USB storage device to the Qumi projector to see if the problem is specific to the device or file. By following these steps, you should be able to troubleshoot and resolve any issues with the image not displaying properly when connecting a digital camera or USB storage device to the Vivitek Qumi Q8 video projector.
To connect your video device to the Vivitek Qumi Q8 projector, you will need a suitable cable. The manual states that various types of external devices can be connected to the Qumi projector, such as DVD players, camcorders, and digital cameras. Here are the steps to determine the type of cable you need: 1. Check the output ports on your video device. Look for HDMI or MHL ports, as these are commonly used for connecting video devices to projectors. 2. If your video device has an HDMI port, you will need an HDMI cable to connect it to the Qumi projector. Make sure the cable is compatible with HDMI version 1.4 or higher for optimal performance. 3. If your video device has an MHL port, you will need an MHL cable to connect it to the Qumi projector. MHL stands for Mobile High-Definition Link and is specifically designed for connecting mobile devices to displays. 4. Ensure that the cable length is sufficient for your setup. It is recommended to use a cable length of up to 5 meters for HDMI or MHL connections to maintain signal quality. By following these steps and selecting the appropriate cable based on the output ports of your video device, you can successfully connect it to the Vivitek Qumi Q8 projector.
There could be several reasons why the Qumi projector is not playing your video or audio file. Here are some troubleshooting steps to help you resolve the issue: 1. Check the file format of your video or audio file. The Qumi Q8 projector supports various formats, including AVI, DivX, MKV, TS, DAT, VOB, MPG, MPEG, MOV, MP4, WMV for video, and MP1/MP2/MP3, WMA, OGG, ADPCM-WAV, PCM-WAV, AAC for audio. Ensure that your file is in a supported format. 2. Verify that the file is stored in the correct location. The Qumi projector can play files from the internal memory or a connected USB storage device. Make sure the file is in the appropriate location and accessible to the projector. 3. Check the connections between your video device and the Qumi projector. Ensure that the cables are securely connected and that the correct input source is selected on the projector. 4. If the file is not playing, try playing a different video or audio file to see if the issue is specific to that particular file. By following these steps, you should be able to troubleshoot and resolve any issues with the Qumi projector not playing your video or audio file.
To readjust the focus ring on the Qumi projector for optimal image quality, follow these steps: 1. Turn on the Qumi projector and wait for it to fully power up. 2. Locate the focus ring on the projector lens. It is usually located on the front or side of the projector. 3. Stand at the desired distance from the projection surface. The optimal distance will depend on the size of the image you want to project. 4. Look at the projected image and determine if it is in focus. If the image appears blurry or out of focus, you will need to adjust the focus ring. 5. Gently rotate the focus ring clockwise or counterclockwise to adjust the focus. Make small adjustments and observe the changes in the projected image. 6. Continue adjusting the focus ring until the image appears sharp and clear. Take your time to find the optimal focus point. 7. Once you have achieved the desired focus, you can start enjoying your projected content with optimal image quality. By following these steps, you can readjust the focus ring on the Qumi projector to ensure that the projected image is sharp and clear for an enhanced viewing experience.
Yes, the manual of the Vivitek Qumi Q8 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Vivitek and is the answer not in the manual?
Question and answer
Number of questions: 0