View the manual for the Visomat Handy Express here, for free. This manual comes under the category sphygmomanometer and has been rated by 1 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Visomat Handy Express or do you need help? Ask your question here
| Brand | Visomat |
| Model | Handy Express |
| Product | sphygmomanometer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Visomat Handy Express below.
Systolic pressure is the top number that the blood pressure monitor will indicate. Systolic pressure refers to the amount of pressure in your arteries during the contraction of your heart muscle.
Diastolic pressure is the lowest number that the blood pressure monitor will indicate. The bottom number refers to your blood pressure when your heart muscle is between beats.
A normal blood pressure is about 120/80.
To properly position your wrist for accurate blood pressure measurements with the Visomat Handy Express sphygmomanometer, follow these steps: 1. Slide the device onto the center of the inside of your forearm, directly on the wrist. Ensure that the palm of your hand is facing upwards. The distance between the wrist and the upper edge of the cuff should be 5-10 mm. 2. Fasten the cuff using the hook and loop fastening. The cuff is designed to sit tightly to avoid measurement errors. 3. Sit at a dining table and lean your back against the backrest of the chair. Bend your arm so that it is exactly at heart level. Place your feet on the ground and do not cross your legs. 4. Keep your wrist unbent and your hand relaxed, avoiding making a fist. 5. It is important to keep your arm calm and not speak during the measurement. 6. Ensure that the cuff is positioned at the same level as your heart. If the cuff is higher or lower than the heart, it may affect the measured value. 7. Perform the measurement while seated, following the instructions on the device's display. By following these steps, you can position your wrist correctly for accurate blood pressure measurements with the Visomat Handy Express sphygmomanometer.
If you receive an error message while using the Visomat Handy Express sphygmomanometer, follow these steps to troubleshoot the issue: 1. Error message "Err - 1" or "Err - 2": - Repeat the measurement. - Avoid moving your arm or speaking during the measurement. - Check the wrist circumference to ensure it is within the recommended range. 2. Error message "Err - 3": - Repeat the measurement. - Avoid moving your arm or speaking during the measurement. 3. Error message "0": - Switch off the device and then switch it on again using the Start/Stop button. - This error may occur if the Start/Stop button was accidentally pressed while replacing the batteries. 4. Irregular pulse or possible cardiac arrhythmia: - Repeat the measurement after resting for 3-5 minutes. - Listen for the device's pulse beep signals. - Consult with your doctor if you suspect any cardiac arrhythmia. 5. Extremely high or low measured values or pulse values: - Ensure you have rested adequately before taking the measurement. - Avoid movement or talking during the measurement. - Follow the usage information provided on page 39. If the error persists or if you encounter any other issues, please contact customer service for further assistance.
Several factors can affect the accuracy of blood pressure measurement results with the Visomat Handy Express sphygmomanometer. Here are the key factors to consider: 1. Resting Period: - Rest for at least 5 minutes before taking the measurement. - Avoid physical exertion or strenuous activities prior to the measurement. 2. Measurement Posture: - Sit in a comfortable position with your back supported and feet flat on the ground. - Keep your arm at heart level, resting on a table or armrest. - Do not cross your legs or slouch during the measurement. 3. Wrist Position: - Position the device on the inside of your wrist, ensuring it is centered and snugly fitted. - The cuff should be approximately 5-10 mm away from the wrist joint. 4. Motion Control: - Avoid moving your arm or talking during the measurement. - Any movement can interfere with the accuracy of the readings. 5. Clothing: - Ensure that clothing does not restrict blood flow to or from the arm. - Roll up sleeves or remove any tight clothing that may interfere with the cuff placement. 6. Resting and Breathing: - Take slow, deep breaths and relax your arm and hand during the measurement. - Do not hold your breath, as it can affect the blood pressure readings. By considering these factors and following the recommended guidelines, you can improve the accuracy of blood pressure measurements with the Visomat Handy Express sphygmomanometer.
To replace the batteries in the Visomat Handy Express sphygmomanometer, follow these steps: 1. Locate the battery compartment on the rear of the device. It is covered by a lid that can be folded up towards the cuff. 2. Open the battery compartment by lifting the lid. This will expose the old batteries. 3. Remove the old batteries from the device. 4. Insert the new batteries into the device, ensuring correct polarity. There should be markings in the battery compartment to guide you. 5. Close the battery compartment by clipping the battery cover back into place. It is important to note that when the "empty battery" symbol first appears in the display, you can still take around 30 measurements before replacing the batteries. Please replace the batteries within this time frame to ensure uninterrupted usage. By following these steps, you can easily replace the batteries in the Visomat Handy Express sphygmomanometer.
For customer service or device repairs for the Visomat Handy Express sphygmomanometer, you can contact the brand directly. Here are the steps to get in touch with Visomat: 1. Visit the Visomat website or search for their official website online. 2. Look for the "Contact" or "Support" section on their website. 3. Find the customer service or support contact information, which may include a phone number, email address, or online contact form. 4. Use the provided contact information to reach out to Visomat's customer service team. 5. Explain your issue or request for device repairs and provide any necessary details, such as the model (Visomat Handy Express) and the specific problem you are experiencing. 6. Follow any instructions provided by the customer service representative for further assistance or to arrange for device repairs. By following these steps and contacting Visomat's customer service, you can get the necessary support and assistance for your Visomat Handy Express sphygmomanometer.
Yes, the manual of the Visomat Handy Express is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Visomat and is the answer not in the manual?
Question and answer
Number of questions: 0