VirtuFit CTR 1.2i manual

VirtuFit CTR 1.2i
5.5 · 1
PDF manual
 · 29 pages
English
manualVirtuFit CTR 1.2i
2
VirtuFit CTR 1.2i Crosstrainer
ENG

INDEX

Important safety notice 3
Assembly instructions 5
Maintenance 10
Operating Guide 11
Technical drawing 22
Parts list 24
App 26

Manual

View the manual for the VirtuFit CTR 1.2i here, for free. This manual comes under the category crosstrainers and has been rated by 1 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the VirtuFit CTR 1.2i or do you need help? Ask your question here

Need help?

Do you have a question about the VirtuFit and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

VirtuFit CTR 1.2i specifications

Below you will find the product specifications and the manual specifications of the VirtuFit CTR 1.2i.

General
BrandVirtuFit
ModelCTR 1.2i | CTR1.2I
Productcrosstrainer
EAN8719689982560
LanguageEnglish
FiletypeUser manual (PDF)
Features
Number of programs21
ErgometerYes
Maximum user weight115 kg
TypeMagnetic cross trainer
Suitable forHome
Product colorBlack, Grey
Number of resistance levels16
Number of heart rate control programs4
Adjustable foot platesYes
Transport wheelsYes
BluetoothYes
Mobile device holderYes
Weight & dimensions
Width600 mm
Depth1050 mm
Height1600 mm
Weight26000 g
Packaging data
Package width285 mm
Package depth790 mm
Package height675 mm
Package weight31500 g
Display
Display typeLED
Training displayed parametersCalories, Distance, Speed, Time
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the VirtuFit CTR 1.2i below.

What is the weight of the VirtuFit CTR 1.2i?

The VirtuFit CTR 1.2i has a weight of 26000 g.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

What is the height of the VirtuFit CTR 1.2i?

The VirtuFit CTR 1.2i has a height of 1600 mm.

What is the width of the VirtuFit CTR 1.2i?

The VirtuFit CTR 1.2i has a width of 600 mm.

What is the depth of the VirtuFit CTR 1.2i?

The VirtuFit CTR 1.2i has a depth of 1050 mm.

Does the VirtuFit CTR 1.2i have a built-in ergometer?

Yes, the VirtuFit CTR 1.2i has a built-in ergometer. This means that it can accurately measure and display the Watts produced during the workout, providing the user with precise information on their performance.

How many programs does the VirtuFit CTR 1.2i offer?

The VirtuFit CTR 1.2i offers 21 programs. This wide variety of programs allows users to choose different workout routines based on their fitness goals and preferences, offering a versatile and personalized training experience.

Can the foot plates of the VirtuFit CTR 1.2i be adjusted?

Yes, the foot plates of the VirtuFit CTR 1.2i are adjustable. This feature allows users to customize the position of the foot plates to ensure optimal comfort and proper alignment during their workouts, reducing the risk of strain or discomfort.

Does the VirtuFit CTR 1.2i have Bluetooth connectivity?

Yes, the VirtuFit CTR 1.2i has Bluetooth connectivity. This enables users to easily connect the cross trainer to their mobile devices, allowing them to track their workouts, access training apps, and listen to music or watch videos while exercising.

How many resistance levels does the VirtuFit CTR 1.2i have?

The VirtuFit CTR 1.2i has 16 resistance levels. This wide range of resistance options allows users to gradually increase the intensity of their workouts, catering to individuals of different fitness levels. It offers versatility and the ability to challenge oneself for continued progress.

How do I adjust the resistance level on the VirtuFit CTR 1.2i crosstrainer?

To adjust the resistance level on the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. Start by ensuring that the crosstrainer is in stop mode. 2. Look for the UP and DOWN buttons on the console of the crosstrainer. These buttons are used to adjust the resistance level. 3. If the dot matrix character is flashing on the console, press the UP button to select the program up. If the related window value is flashing, press the UP button to increase the value. 4. During the start mode, press the UP button to increase the training resistance. 5. Similarly, if the dot matrix character is flashing on the console, press the DOWN button to select the program down. If the related window value is flashing, press the DOWN button to decrease the value. 6. During the start mode, press the DOWN button to decrease the training resistance. 7. Once you have adjusted the resistance level to your desired setting, you can start your exercise by pressing the START/STOP button. Remember to start with a lower resistance level if you are new to using the crosstrainer and gradually increase it as you become more comfortable and fit. Please note that these instructions are specific to the VirtuFit CTR 1.2i crosstrainer.

How do I set up user profiles on the VirtuFit CTR 1.2i crosstrainer?

To set up user profiles on the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. On the control panel of the crosstrainer, locate the User Setting Programs. These programs are labeled as CUSTOM1 to CUSTOM5. 2. Record the user's data for each of the 5 User Setting Programs. This data may include information such as age, weight, and height. 3. The control panel will display various metrics such as Speed (RPM), Time, Watt, Calories, and Distance simultaneously. 4. If there is no operation, speed signal, or pulse signal for over 4 minutes, the computer will automatically turn off. It will store your current exercise data and set the loading resistance to the minimum. To turn on the computer again, simply press any button or start moving. By setting up user profiles, you can personalize your workouts and track your progress more accurately. Each user can have their own profile with customized settings and data. Please note that these instructions are specific to the VirtuFit CTR 1.2i crosstrainer.

How often should I clean the VirtuFit CTR 1.2i crosstrainer and what cleaning products should I use?

To clean the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. After each use, wipe down the crosstrainer with a slightly damp cloth and mild soap. This will help remove any sweat or dirt that may have accumulated during your workout. 2. Pay special attention to areas that are prone to perspiration, such as the handles and seat. Make sure to clean these areas thoroughly to prevent corrosion. 3. Avoid using harsh chemicals or abrasive cleaners, as they may damage the surface of the crosstrainer. Instead, use a soft cloth and gentle soap to clean the machine. 4. It is recommended to clean the crosstrainer regularly to maintain its performance and longevity. Aim to clean it at least once a week or more frequently if you use it frequently or in a high humidity environment. 5. Do not place the crosstrainer in a room with high humidity, such as a shed or a room where a washing machine is located. High humidity can promote corrosion and damage the machine. By following these cleaning steps, you can keep your VirtuFit CTR 1.2i crosstrainer in good condition and ensure optimal performance during your workouts. Please note that these instructions are specific to the VirtuFit CTR 1.2i crosstrainer.

What should I do if the VirtuFit CTR 1.2i crosstrainer is not turning on or not responding to my inputs?

If the VirtuFit CTR 1.2i crosstrainer is not turning on or not responding to your inputs, you can try the following steps: 1. Check the power source: Ensure that the crosstrainer is properly plugged into a working power outlet. If it is plugged into a power strip or extension cord, make sure that the power strip or extension cord is also functioning correctly. 2. Reset the machine: If the crosstrainer is not responding, try resetting it. Locate the power switch or button on the machine and turn it off. Wait for a few seconds, then turn it back on. This can help reset any temporary issues with the machine's electronics. 3. Check the batteries: If the crosstrainer is battery-powered, make sure that the batteries are properly installed and have enough charge. Replace the batteries if necessary. 4. Contact customer support: If the crosstrainer still does not turn on or respond to your inputs, it may indicate a more significant issue. In this case, it is recommended to contact the customer support of VirtuFit or your dealer for further assistance. Please note that these troubleshooting steps are specific to the VirtuFit CTR 1.2i crosstrainer.

How do I properly assemble the VirtuFit CTR 1.2i crosstrainer?

To properly assemble the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. Before you begin, carefully check the package and the crosstrainer itself to ensure that all parts are included. Some parts, such as bolts and screws, may already be attached to or inside the device. 2. Start by attaching the Front Stabilizer (part 35) and the Rear Stabilizer (part 36) to the Main Frame (part 40) using the provided Carriage Bolt (part 33), Domed Nut (part 23), and Arc Washer (part 22). Please note that these steps are based on the assembly instructions provided in the manual for the VirtuFit CTR 1.2i crosstrainer. It is important to refer to the specific instructions and diagrams in the manual for the complete assembly process. Please note that these instructions are specific to the VirtuFit CTR 1.2i crosstrainer.

How do I adjust the resistance level on the VirtuFit CTR 1.2i crosstrainer?

To adjust the resistance level on the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. Start Mode: If you are in the start mode, press the UP button to increase the training resistance. Press the DOWN button to decrease the training resistance. 2. Stop Mode: If you are in the stop mode and the dot matrix character is flashing, press the UP button to select the program up. If the related window value is flashing, press the UP button to increase the value. Press the DOWN button to select the program down. If the related window value is flashing, press the DOWN button to decrease the value. 3. User Profile Programs: If you want to set the resistance level for a specific user profile program, follow these steps: a. Press the UP and DOWN buttons to select the user. b. Press ENTER to confirm your choice and enter the time setting window. c. The time display will flash. Press the UP and DOWN buttons to set up the desired time for the exercise. Press ENTER to confirm the value. d. The distance will flash. Press the UP and DOWN buttons to set up the desired distance value. Press ENTER to confirm the value. e. The calories will flash. Press the UP and DOWN buttons to set up the desired calories to be consumed. Press ENTER to confirm the value. f. The first resistance level will flash. Press the UP and DOWN buttons to set the desired load resistance. Press ENTER to confirm. Repeat this step to set the resistance from 2 to 10. g. Press the START/STOP button to begin the exercise. Remember to follow the operating guide and use the buttons accordingly to adjust the resistance level on the VirtuFit CTR 1.2i crosstrainer.

Why is the resistance not changing when I adjust it on the crosstrainer?

There could be several reasons why the resistance is not changing when you adjust it on the VirtuFit CTR 1.2i crosstrainer. Here are some possible causes and solutions: 1. Incorrect Mode: Make sure you are in the correct mode for adjusting the resistance. Check the display screen to ensure you are in the resistance adjustment mode. 2. Technical Issue: If the resistance is not changing at all, there may be a technical issue with the crosstrainer. Check if there are any error messages or unusual sounds coming from the machine. If so, contact customer support for assistance. 3. User Profile Settings: If you have set up user profiles on the crosstrainer, check if the resistance level is locked or restricted for a specific user. Adjust the user profile settings to allow changes to the resistance level. 4. Calibration: It is possible that the crosstrainer needs calibration. Refer to the manual for instructions on how to calibrate the resistance system. Follow the calibration process carefully to ensure accurate resistance adjustments. If none of these solutions resolve the issue, it is recommended to consult the manual or contact customer support for further assistance.

How do I set up user profiles on the VirtuFit CTR 1.2i crosstrainer?

To set up user profiles on the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. Record User Data: Access the control panel of the crosstrainer and navigate to the User Setting Programs. There are 5 user profiles available. Record the data for each user, such as age, weight, and height. 2. Display Settings: The control panel will display various information, including speed (RPM), time, wattage, calories burned, and distance. Make sure these settings are visible on the display. 3. Automatic Turn-off: The crosstrainer has an automatic turn-off feature. If there is no operation for 4 minutes or if the speed and pulse signals are not detected, the computer will turn off. It will store your current exercise data and set the resistance to the minimum level. To turn on the crosstrainer, simply press any button or start moving. By following these steps, you can set up user profiles on the VirtuFit CTR 1.2i crosstrainer. Each user can then access their personalized data and track their progress during workouts.

Why are my user profiles not saving on the crosstrainer?

There could be a few reasons why your user profiles are not saving on the VirtuFit CTR 1.2i crosstrainer. Here are some possible causes and solutions: 1. Incorrect User Profile Setup: Ensure that you have correctly set up the user profiles on the crosstrainer. Follow the instructions in the manual to input the necessary data for each user, such as age, weight, and height. 2. Insufficient Memory: Check if the crosstrainer has enough memory to save the user profiles. If the memory is full, you may need to delete some existing profiles or clear the memory to make space for new profiles. 3. Technical Issue: If the crosstrainer is experiencing a technical issue, it may prevent the user profiles from saving. Check for any error messages or unusual behavior. If necessary, contact customer support for assistance. 4. Power Supply: Ensure that the crosstrainer is properly connected to a power source. If there is a power interruption or the crosstrainer loses power, it may not be able to save the user profiles. If none of these solutions resolve the issue, it is recommended to consult the manual or contact customer support for further assistance.

How do I select and use different workout programs on the VirtuFit CTR 1.2i crosstrainer?

To select and use different workout programs on the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. Access the Control Panel: Locate the control panel on the crosstrainer. It should display various buttons and options for program selection. 2. Program Options: The crosstrainer offers 21 different programs. These programs include a manual program and 10 preset programs (P1-P10). Additionally, there are 5 user setting programs (CUSTOM1 to CUSTOM5). 3. Selecting a Program: Use the buttons on the control panel to navigate through the program options. Press the corresponding button for the desired program. For example, if you want to select the manual program, press the button labeled "A." If you want to select one of the preset programs, press the button labeled with the corresponding program number (P1-P10). 4. User Setting Programs: If you want to use one of the user setting programs, follow these steps: a. Press the button labeled "E" on the control panel. b. Enter the user's data for the desired program. This may include age, weight, and other relevant information. c. The display should show the speed (RPM), time, wattage, calories burned, and distance simultaneously. 5. Automatic Turn-off: The crosstrainer has an automatic turn-off feature. If there is no operation for 4 minutes or if the speed and pulse signals are not detected, the computer will turn off. It will store your current exercise data and set the resistance to the minimum level. To turn on the crosstrainer, simply press any button or start moving. By following these steps, you can select and use different workout programs on the VirtuFit CTR 1.2i crosstrainer. Enjoy your workouts!

Why are the workout programs not working properly on the crosstrainer?

If the workout programs are not working properly on the VirtuFit CTR 1.2i crosstrainer, there could be a few reasons for this issue. Here are some possible causes and solutions: 1. Incorrect Program Selection: Ensure that you have selected the correct program and followed the instructions for that specific program. Double-check the program number or name on the control panel to make sure you have chosen the desired program. 2. User Profile Settings: If you are using one of the user setting programs, verify that the user profile settings are accurate. Check if the age, weight, and other relevant information for the user are correctly entered. Adjust the user profile settings if necessary. 3. Technical Issue: If the workout programs are consistently not working properly, there may be a technical issue with the crosstrainer. Check for any error messages or unusual behavior. If needed, contact customer support for assistance. 4. Power Supply: Ensure that the crosstrainer is properly connected to a power source. If there is a power interruption or the crosstrainer loses power, it may affect the functionality of the workout programs. If none of these solutions resolve the issue, it is recommended to consult the manual or contact customer support for further assistance.

How do I clean the VirtuFit CTR 1.2i crosstrainer?

To clean the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. Use a slightly damp cloth: After each use, clean the crosstrainer with a slightly damp cloth and mild soap. This will help remove sweat and prevent corrosion. Avoid using excessive water or harsh cleaning agents. 2. Grease moving parts: Every 6 months, apply grease to all moving parts mounted on the base of the crosstrainer. You can use Vaseline (without acids) or silicone oil for this purpose. Greasing the parts will ensure smooth operation and prevent friction. 3. Avoid high humidity: Do not place the crosstrainer in a room with high humidity, such as a shed or a room with a washing machine. High humidity can lead to damage and corrosion. 4. Troubleshooting: If you encounter specific issues with the crosstrainer, such as squeaking or no resistance, refer to the troubleshooting section in the manual for solutions. For example, you may need to lubricate rotating parts with silicone spray or check the motor and display connections. By following these steps, you can effectively clean and maintain the VirtuFit CTR 1.2i crosstrainer for optimal performance.

What cleaning products should I use to clean the crosstrainer?

To clean the VirtuFit CTR 1.2i crosstrainer, you can use the following cleaning products: 1. Mild Soap: Use a mild soap or detergent mixed with water to clean the surfaces of the crosstrainer. This will help remove dirt, sweat, and other residues. 2. Damp Cloth: Use a slightly damp cloth to wipe down the surfaces of the crosstrainer. Make sure the cloth is not too wet to avoid water damage. 3. Non-Abrasive Cleaner: If there are stubborn stains or marks on the crosstrainer, you can use a non-abrasive cleaner. Make sure the cleaner is safe to use on the specific materials of the crosstrainer. 4. Avoid Harsh Chemicals: Avoid using harsh chemicals, abrasive cleaners, or solvents as they can damage the surfaces of the crosstrainer. 5. Silicone Spray: For lubricating the moving parts, you can use silicone spray. This will help maintain smooth operation and prevent friction. Remember to always follow the manufacturer's instructions and recommendations for cleaning and maintenance. By using these cleaning products, you can keep your VirtuFit CTR 1.2i crosstrainer clean and in good condition.

How often should I lubricate the VirtuFit CTR 1.2i crosstrainer?

To lubricate the VirtuFit CTR 1.2i crosstrainer, it is recommended to grease all moving parts mounted on the base of the device once every 6 months. This can be done using Vaseline (without acids) or silicone oil. Greasing the parts will ensure smooth operation and prevent friction. Please note that the information provided is based on the manual for the VirtuFit CTR 1.2i crosstrainer. Regular lubrication is important to maintain the performance and longevity of the crosstrainer.

Why is the crosstrainer making a squeaking noise during use?

A squeaking noise during use of the VirtuFit CTR 1.2i crosstrainer can be caused by several factors. Here are the steps to address this issue: 1. Lubricate rotating parts: Use silicone spray to lubricate all rotating parts of the crosstrainer. This can help reduce friction and eliminate the squeaking noise. Apply the silicone spray to areas such as the pedals, flywheel, and other moving components. 2. Check tightness of screws: It is possible that a screw may be tightened too tightly or too loosely, causing friction and the squeaking noise. Identify the source of the noise and check if any screws need to be adjusted. Ensure that the screws are tightened appropriately but can still be released by hand. 3. Troubleshooting: If the squeaking noise persists, there may be other underlying issues. Refer to the troubleshooting section in the manual for further guidance. It is important to identify the exact cause of the noise to determine the appropriate solution. By following these steps, you can address the squeaking noise issue on the VirtuFit CTR 1.2i crosstrainer and ensure a smoother and quieter workout experience.

What safety precautions should I follow while using the VirtuFit CTR 1.2i crosstrainer?

To ensure your safety while using the VirtuFit CTR 1.2i crosstrainer, follow these precautions: 1. Proper Posture: Maintain a proper posture while using the crosstrainer. Stand tall with your shoulders back and engage your core muscles. Avoid slouching or leaning on the handles excessively. 2. Stable Surface: Place the crosstrainer on a stable and level surface. This will prevent any wobbling or tipping during use. Avoid using the crosstrainer on uneven or slippery surfaces. 3. Warm-up and Cool-down: Always start your workout with a warm-up session to prepare your muscles and gradually increase the intensity. Similarly, end your workout with a cool-down session to gradually decrease the intensity and allow your body to recover. 4. Hydration: Stay hydrated throughout your workout by drinking water at regular intervals. Keep a water bottle nearby for easy access. 5. Safety Key: Attach the safety key to your clothing while using the crosstrainer. This key acts as an emergency stop mechanism and will immediately stop the machine if pulled. 6. Children and Pets: Keep children and pets away from the crosstrainer during use. They may accidentally get caught in the moving parts or interfere with your workout. By following these safety precautions, you can ensure a safe and enjoyable workout experience on the VirtuFit CTR 1.2i crosstrainer.

Why is the crosstrainer wobbling during use?

If the VirtuFit CTR 1.2i crosstrainer is wobbling during use, there are a few possible reasons for this issue. Follow these steps to address the problem: 1. Level Surface: Ensure that the crosstrainer is placed on a level surface. Use a spirit level or a similar tool to check the levelness. Adjust the position of the crosstrainer if necessary. 2. Tighten Bolts: Check all the bolts and screws on the crosstrainer and make sure they are securely tightened. Loose bolts can cause instability and wobbling. Use the appropriate tools to tighten any loose bolts. 3. Weight Distribution: Ensure that your weight is evenly distributed on the crosstrainer. Stand in the center of the pedals and avoid leaning excessively to one side. This will help maintain balance and stability during your workout. 4. User Weight Limit: Check the user weight limit specified in the manual. If your weight exceeds the recommended limit, it may cause the crosstrainer to wobble. Consider reducing the intensity of your workout or consulting a professional for guidance. By following these steps, you can address the issue of the VirtuFit CTR 1.2i crosstrainer wobbling during use and ensure a stable and safe workout experience.

How do I assemble the VirtuFit CTR 1.2i crosstrainer?

To assemble the VirtuFit CTR 1.2i crosstrainer, follow these steps: 1. Check for Missing Parts: Before starting the assembly, carefully check the styrofoam packaging and the device itself for any missing parts. Some parts, such as bolts and screws, may already be attached to or inside the device. 2. Attach the Stabilizers: Attach the Front Stabilizer (35) and the Rear Stabilizer (36) to the Main Frame (40) using the provided Carriage Bolt (33), Domed Nut (23), and Arc Washer (22). Please note that the assembly instructions provided here are based on the manual for the VirtuFit CTR 1.2i crosstrainer. It is important to refer to the manual for detailed and accurate assembly instructions specific to this model.

Why are the parts not fitting together properly during assembly?

If the parts of the VirtuFit CTR 1.2i crosstrainer are not fitting together properly during assembly, there could be a few reasons for this issue. Follow these steps to address the problem: 1. Double-check Part Numbers: Ensure that you are using the correct parts for each step of the assembly. Check the part numbers and compare them to the instructions in the manual to make sure you have the right components. 2. Align the Parts: Pay close attention to the alignment of the parts. Make sure that the holes, slots, or connectors on each piece are properly aligned before attempting to fit them together. Adjust the position of the parts if necessary. 3. Apply Gentle Pressure: Use gentle pressure to fit the parts together. Avoid using excessive force, as this can damage the components or cause misalignment. If the parts are not fitting together smoothly, try adjusting the angle or position slightly to find the correct alignment. 4. Seek Assistance: If you are still experiencing difficulty in fitting the parts together, consider seeking assistance from a friend or contacting customer support for guidance. They may be able to provide additional troubleshooting steps or offer further assistance. By following these steps, you can address the issue of parts not fitting together properly during the assembly of the VirtuFit CTR 1.2i crosstrainer and ensure a successful assembly process.

Is the manual of the VirtuFit CTR 1.2i available in English?

Yes, the manual of the VirtuFit CTR 1.2i is available in English .

Is your question not listed? Ask your question here

No results